Zoeller Model M807 Grinder Pump Description
The Shark Series® Model M807 Grinder Pump is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1 HP 807 is a time-tested and reliable grinder pump. The M807 is a fully automatic float-operated sewage pump. The white polypropylene float is solid so it cannot become waterlogged. This ensures that it is always buoyant and able to turn the pump on when necessary.
The industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″. The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.
The Model 807’s switch case, motor housing, pump housing, and base are each constructed of cast iron. The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 807 is able to withstand the most demanding sewage ejector applications.
Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.
Zoeller Model M807 Grinder Pump Features and Benefits
- Oil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation Which Prevents the Pump from Overheating
- Automatic Pump with a Time-Tested, Reliable, Preset, Built-In Snap Action Switch that Makes for an Easy Installation
- Proven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute.
- Stainless Steel Float Guard that Prevents Material or Debris form Collecting on the Float Ensuring Proper Operation Every Time
- Solid, Buoyant, Polypropylene Float to Eliminate the Possibility of Water Infiltration Allowing the Float to Remain Buoyant and Functional at all Times
- Powder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments
- Stainless Steel Screws, Switch Arm, Guard, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump
- 100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected When You Receive it
- Comes With a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product
Zoeller 807-0001 Grinder Pump Specifications
- VOLTAGE: 1ø, 115V, 60Hz
- HORSEPOWER: 1.0 HP
- AMP DRAW (full load): 11.0
- MOTOR TYPE: Capacitor Start, Capacitor Run
- RPM: 3400
- MAXIMUM HEAD: 55'
- MAXIMUM CAPACITY: 45 GPM
- SWITCH TYPE: Vertical Float Switch
- SWITCH 'ON' LEVEL: 13"
- SWITCH 'OFF' LEVEL: 5-3/4"
- DISCHARGE PIPE SIZE: 1-1/4" NPT
- IMPELLER TYPE: Engineered Plastic, Non-Clogging Vortex
- CORD LENGTH: 15' Type UL Listed 3-Wire Plug
- BODY CONSTRUCTION: Cast Iron
- MAXIMUM LIQUID TEMPERATURE: 130°F (54C)
Zoeller Model M807 Grinder Pump Performance Curve
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Zoeller Limited Warranty
Manufacturer warrants, to the purchaser and subsequent owner during the warranty
period, every new product to be free from defects in material and workmanship
under normal use and service, when properly used and maintained, for a period of
three years from the date of purchase. Proof of purchase is required. Parts that fail
within the warranty period, that inspections determine to be defective in material
or workmanship, will be repaired, replaced or remanufactured at Manufacturer's
option, provided however, that by so doing we will not be obligated to replace an
entire assembly, the entire mechanism or the complete unit. No allowance will be
made for shipping charges, damages, labor or other charges that may occur due to
product failure, repair or replacement.
This warranty does not apply to and there shall be no warranty for any material or
product that has been disassembled without prior approval of Manufacturer, subjected
to misuse, misapplication, neglect, alteration, accident or act of nature; that has not
been installed, operated or maintained in accordance with Manufacturer's installation
instructions; that has been exposed to outside substances including but not limited to
the following: sand, gravel, cement, mud, tar, hydrocarbons, hydrocarbon derivatives
(oil, gasoline, solvents, etc.), or other abrasive or corrosive substances, wash towels
or feminine sanitary products, etc. in all pumping applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and
we do not authorize any representative or other person to assume for us any other
liability in connection with our products.
Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211, Attention:
Customer Service Department to obtain any needed repair or replacement of part(s)
or additional information pertaining to our warranty.
MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL,
CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED
OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED TO
THE DURATION OF THE EXPRESSED WARRANTY.
Some states do not allow limitations on the duration of an implied warranty, so the
above limitation may not apply to you. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion
may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.