Discontinued - Zoeller

Zoeller Qwik Jon Replacement Pump Description

The "Waste-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering and wastewater applications and can be used to transfer groundwater, effluent or raw sewage. The innovative vortex impeller design reduces the risk of clogging and allows each pump to pass 2" (50 mm) spherical solids. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance!

Zoeller Qwik Jon Sewage Removal System Features and Benefits

Models:

• Model 100 UL Listed 264 pump
• Model 101 Preassembled cCSAus Listed 211 pump
• Model 102 UL Listed 266 pump
• Patent No. 5,038,418

Typical Installation:

• Versatile installation enables the pump compartment and piping to be concealed by the installation of a wall
• Note: Access must be maintained to the pump compartment
• Note: The Qwik Jon® is designed to fit flush with any elevated floor make of standard 2" x 6" (5 x 15cm) material (actual dimensions 1-1/2" x 5-1/2" [3.8 x 14.0 cm])
• Add a lavatory, bathtub, or shower with the installation of the 2" (50mm) adapt-a-flex seal (provided)
• Tub or shower requires built in installation. See installation instructions FM1469.
• Designed to accommodate a toilet, lavatory and bathtub
• Use with a variety of toilet styles (1.6 gallon [7.3 L] residential flush)
• Perfect for basements, family rooms, warehouse, factories, room additions, etc.
• No need to destroy concrete floors
• Reduces construction costs
• Pumps any direction
• Fits just about anywhere
• Toilet, fixtures and piping not included

Zoeller WM266 Qwik Jon® replacement pump system includes:

• Model 100
  • Pump: model WM264
  • .4 HP, 115 V, 9.4 Amps
  • PSC motor
  • UL listed
• Model 101 (preassembled)
  • Pump: model WM211
  • .4 HP, 115 V, 5.5 Amps
  • PSC motor
  • cCSAus certified
• Model 102
  • Pump: model WM266
  • 1/2 HP, 115V, 10.4 Amps
  • Split phase motor
  • CSA and UL listed

Note: Sewage pumps WM264, WM211 and WM266 are designed for use in Qwik Jon® units only. They are not designed for use in any other application.

• Automatic level control switch
• Thermal overload protected motor
• Stainless steel screws, bolts and handle
• Non-clogging vortex impeller
• Passes 2" (50mm) spherical solids
• UL listed, 3-wire neoprene 10 ft. cord and plug
• Maximum temperature models 100 and 102: 130°F (54°C)
• Maximum temperature model 101: 110°F (43°C)

Tank (model 100, 101, 102 patented) features:

• Durable polyethylene tank
• Light gray finish
• Lightweight: 27 lbs (12Kg)

2” (50mm) back-flow device and union:

• 2” (50mm) back-flow device (check local codes) required to prevent back flow of water and sewer gas
• No threading of pipe required
• Fits ABS, PVC and steel pipe
• Weight: 2 lbs. (0.9Kg)

Items needed by installer:

• Supply Fittings and Waste Pipe
• Toilet Fixture
• Electrical Source with Ground Fault Interrupter Protected Receptacle
• Water Source
• Tools

Zoeller Qwik Jon Sewage Removal Systems Pump & Tank Specifications

• HERTZ: 60Hz
• MOTOR: 0.5 HP
• VOLTAGE: 115V
• RPM: 1750 RPM
• DISCHARGE SIZE: 2"
• CORD LENGTH: 10" Cord
• TYPE: UL Listed, 3-Prong Plug
• MAX OPERATING TEMP: 130° F (54° C)
• MOTOR PROTECTION: Thermal Overload
• MECHANICAL SEALS: Carbon & Ceramic
• IMPELLER TYPE: Non-Clogging Vortex
• HARDWARE: Stainless Steel

Zoeller Qwik Jon Sewage Removal Pump System Performance Curve

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Zoeller Qwik Jon Sewage System Product Resources

Download Zoeller Catalog Sheet Qwik Jon 100, 101, 102 FM0692

Download Zoeller Qwik Jon Installation Instructions 100, 101, 102 FM1469