Commercial/Municipal/Industrial Supplier for Idaho. Commercial Supplier for Washington and Oregon.

Hydromatic HPGFH Submersible Sewage Grinder Pump Description

Hydromatic HPGFH Submersible Sewage Grinder Pump is designed to meet the demands of Residential, Commercial and Resort Areas.

Hydromatic HPGFH Typical Application

• Residential
• Commercial
• Resort Area

Hydromatic HPGFH Superior Features

• One epoxy barrier and one compression fitting for maximum protection against wicking and water seepage into the motor housing.
• The heavy-duty ball bearings, upper (radial) and lower (thrust), are continuously lubricated by oil to ensure long service life.
• Electrical motor design combines the advantages of high torque output with optimum running efficiency engineered specifically for grinder operation.
• The stator is secured to the motor housing by means of stator bolts and retaining ring which ensure ease of maintenance if the need ever arises.
• Standard stainless steel shaft in grinder pump
• Dual seals for maximum moisture protection.
• Moisture detection probe.
• Exclusive “Dual Cutter” design cuts solids to smallest particle size, thereby greatly reducing clogging, roping, or binding.
• Engineered nonmetallic semiopen impeller molded to a bronze insert for greatest torque driving capabilities. Impeller made of high strength Valox® which provides highest level of corrosion resistance and maximum toughness from impact for a wide variety of slurry pumpage. Pump-out vanes preclude material buildup around shaft and seal.

Hydromatic HPGFH Key Features

• Explosion-proof
• Class 1, Division 1, Groups C & D
• Dual seals for maximum moisture protection
• Oil-filled motor for maximum heat dissipation and constant bearing lubrication
• Exclusive dual cutter design cuts solids to the smallest particle size
• Semi-open impeller provides steep non-overloading operating curve
• Available configurations, rails and accessories:
  • Rail Systems Available
  • Controls and Accessories Available

Hydromatic HPGFH750M6-4 Technical Details

• BODY CONSTRUCTION: Class 30 Cast Iron
• HORSEPOWER: 7.5 HP
• RPM: 1750
• MAXIMUM HEAD: up to 175'
• MAXIMUM CAPACITY: up to 107 GPM
• DISCHARGE PIPE SIZE: 3" 125# Flange Horizontal Discharge
• CORD LENGTH: 35' Standard
• CORD SIZE: 8-4; Type: SOOW, W
• AMP DRAW (full load): 29.0
• VOLTAGE: 3ø, 200V
• MAXIMUM LIQUID TEMPERATURE: 140°F
• MOTOR: Enclosed, Oil Cooled Induction
• IMPELLER CONSTRUCTION: Semi-Open 5 Vane, Red Brass #85-5-5-5, ASTM B584-836
• IMPELLER SIZE: 10.5"

Hydromatic HPGFH Pump Curve

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Hydromatic HPGFH Product Resources

Download Hydromatic HPGFH Sales Brochure

Download Hydromatic HPGFH Electrical Data

Download Hydromatic HPGFH Technical Data

Download Hydromatic HPGFH Performance Curve

Download Hydromatic HPGFH Installation & Service Manual

Download Hydromatic HPGFH Dimensional Data

Download Hydromatic HPGFH Specification Data