Skip to product information
1 of 1

Geoflow Drip Tubing WFP05B Wasteflow BLANK Line (No Emitters) - Per Foot Price - 100' Minimum Order

Geoflow Drip Tubing WFP05B Wasteflow BLANK Line (No Emitters) - Per Foot Price - 100' Minimum Order


Ships within 24 hours

SKU : GFWWFP05B

In Stock Quantity:0

:
Brand : Geoflow
Shipping calculated at checkout.

Description

geoflow600a.png

The flexible 1/2” polyethylene blank line has no emitters and us normally used to bridge areas where emitters are not needed or wanted in the system design. This Geoflow drip tubing is built to last. It is guaranteed to be trouble-free from root intrusion with built-in nano-ROOTGUARD® protection, and the dripline wall is protected from organic growth with the Geoshield lining. Use 600 series compression adapters or lockslip fittings to connect the dripline to PVC pipe.

BACTERICIDE Protection Geoshield® is incorporated into the inner lining and emitters of WASTEFLOW dripline to prevent bacteria from forming and eliminates the need to scour the tubing. It is a tin based formula that defeats the energy system of microbial cells. This means smaller pumps or larger zones can be used with Geoflow drip line than unprotected drip line.

Specifications

Geoflow Wasteflow PC Drip Tubing Specifications

The dripline shall consist of nominal sized one-half inch linear low density polyethylene tubing, with turbulent flow drip emitters bonded to the inside wall. The drip emitter flow passage shall be 0.032” x 0.045” square. The tubing shall have an outside diameter (O.D.) of approximately .64-inches and an inside diameter (I.D.) of approximately .55-inches. The tubing shall consist of three layers; the inside layer shall be a Geoshield® protection, the middle layer shall be black and the outside layer shall be purple striped for easy identification. The dripline shall have emitters regularly spaced 24” (or 18” or 12”) apart. The pressure compensating emitters shall be molded from virgin polyethylene resin with a silicone rubber diaphragm. The pressure compensating emitters shall have nominal discharge rates of 0.53 gallons per hour. The emitters shall be impregnated with Treflan® to inhibit root intrusion for a minimum period of fifteen years and shall be guaranteed by the manufacturer to inhibit root intrusion for this period. 0.53 gph WASTEFLOW PC pressure compensating dripline shall be Geoflow model number WFPC16-2-24 (or WFPC16-2-18 or WFPC16-2-12)

Geoflow Wasteflow PC Drip Tubing Technical Details

geoflowwasteflowpcpressureloss.jpg

geoflowwasteflowpcpressurelosschart.jpg


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Resources

Geoflow Air Release Vent Technical Product Resources

product-resourcesb.png

Download Geoflow Design Manual

View full details

PUMPS, WATER & WASTE WATER TREATMENT AND A WHOLE LOT MORE

Dedicated to deliver the highest quality products, and services in the water and wastewater industry, and with the help of our well-trained staff, provide a lasting value to each customer we support... read more

HELPING CUSTOMERS SINCE 1953

As time-tested specialists in water and waste water pumping systems, we are your best choice for pumps and related equipment.

  • Wastewater Treatment Systems
  • Sump Pump Systems
  • UV Water Purification & Treatment
  • Irrigation Pump Systems
  • Storm Water Lift Stations
  • Water Well Pump Systems

OUR CUSTOMERS REVIEWS