Tru-power sensing protects the IPS-RV from dry-run, dead head, runout and jammed impeller conditions keeping you online and preventing costly premature pump failure. Along with superior protection, measuring underload using power allows for a more flexible trip range, as opposed to measuring by current, which requires a more precise set point. The end result is the elimination of nuisance trips.

Franklin Electric IPS-RV Intelligent Pump Soft Starter Features

Integrated Tru-Power Electronic Protection
• Eliminates need for Costly Pump Protection Relays
• Dry Pump Detection using Power (nuisance trip-free); Time-Based Automatic Restart and Well Recovery Mode
• Features a Wide-Range, Adjustable, Class 5-30 Electronic Overload
• Provides Superior Motor Protection from the Following Conditions:
• Over/Under Power (dry-run)
• Voltage Phase Loss
• Stalled/Locked Rotor
• Ground Fault (UL1053 certified)
• Over/Under Voltage Protection
• Voltage and Current Phase Unbalance
• Cycle Fault
• Voltage Phase Reversal
Soft Starter Features
• Full HP Rated Bypass Contactor
• Across-the-Line Start for Emergency Situations (turns the soft-starter into a standard IPS)
• Start Modes Feature an Adjustable Current Limit, Initial Voltage and Start Time with a Torque Boost Feature
• Stop Modes Include:
• Coast to Stop
• Linear Deceleration (reduces water-hammer effect)
• Adjustable Stop Voltage and Stop Time
• SCR Over-Temperature Detection
• Shorted SCR Detection
• Easy to Setup and Use Inside, the Display Shows an Easy to Use Menu for Setting a Wealth of Parameters. Adjust any Protective or Control Setting in Seconds. For Example, Choose how Long to Allow for Dry Well Recovery, Set Run Time Periods and On/Off Delays. All this with Just a Few Intuitive Keystrokes. The IPS-RV Ships with Factory Default Settings Pre-Programmed for Optimal Submersible Pump Protection.
Industrial Grade Construction
• Door Mounted Heavy-Duty HOA Switch
• Housed in and Outdoor Rated, Gasketed, NEMA 3R Enclosure
• Multi-Tap Control Power Transformer with Integrated Secondary Protection Accommodates Common Motor Voltages. No Fuses Required!
• Includes 120 VAC Control Power for Field Devices
Advanced Programmable Pump Control
• Automatic Fault Reset
• Backspin Delay - Prevents Start-Ups into Draining Systems
• On and Off Delay Settings
• Well Recovery Mode (up to 48 hours)
• Minimum Run Time Based on Last Input
• 12-120V Input for Remote Start/Stop
• Dry Contact Input for Remote Start/Stop
• Dry Contact Input for Float Switches
• Analog Input for (selectable) 0-10V, 4-20mA, or 10k Thermistor, Viewable as a Modbus Point
Built-In Monitoring & Fault Logging
• View Voltage, Current, Power Factor and More through an Intuitive Display
• Built-In Fault Log, Counter and Parameter Change Log: Records last 15 Fault Types with Power Condition Values, Stores how many Times each Fault Type has Occurred (up to 255 count) and Logs Changes to Parameter Settings (e.g. FLA, OV/UV, under power)
• Built-In Modbus RTU Communications Card

Franklin Electric IPS-RV Intelligent Pump Soft Starter Specifications

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Franklin Electric Intelligent Pump Soft Starter Specification Sheet

Franklin Electric Intelligent Pump Soft Starter Manual