Prev Next

Myers 10MD05121 Submersible Effluent Pump 10 GPM 0.5 HP 115V 1PH 10' Cord

Price: $710.64
Quantity:
+ -
Usually ships within 2 weeks
SKU: MYR10MD05121


Shipping Weight:
24.0 LBS
Shipping Dimensions
Length: 24 In
Width: 6 In
Height: 6 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

myerslogopumps1.png

Myers MD Series Submersible Effluent Pump Description

The Myers MD Series 4" Stainless Steel Submersible Effluent Pumps are capable of drawing down to 4-1/2" (a standard NEMA 4" only draws down to 13-1/2"). Lower amp draw reduces operating costs and extends the life of the float switch contacts. Pumped fluid flows around motor providing cooling and sound dampening. Ideal for on-site filtered and cistern applications.

Myers MD Series Submersible Effluent Pump Typical Applications

  • On-Site Filtered Effluent
  • Cistern Pumping

Myers MD Series Submersible Effluent Pump Features

  • Superior Drawdown Capability to 4-1/2" (114 mm) vs. 13-1/2" (343 mm) on a Standard NEMA 4"
  • Lower Operating Costs 25% Reduced Amp-Draw (9.5A vs. 12.7A on a Standard NEMA 4")
  • Cooler and Quieter Designed to Route Pumped Fluid Over Motor for Cooler Operation and Reduced Noise - Eliminates Need for Expensive "Flow-Inducer Sleeves"
  • Proven and Patented Field-Proven Staging System Utilizes Patented Ceramic Wear Surface and Features Industry-Exclusive "Dry-Run" Capabilities
  • Built to Last Stainless Steel and Reinforced Thermoplastic Construction; Heavy Duty, Double-Seal, Double Ball-Bearing Motor with 7/16" Stainless Steel Shaft
  • Thermal Protection Overload Protection with Automatic Reset when Motor Cools to a Safe Operating Temperature
  • Protected from Debris Self-Lubricating Nylatron® Shaft Bearing Protects Wear Surface From Sand and Abrasives
  • Serviceable Screen Field-Serviceable Composite Intake Screen - Allows up to 0.80" Solids.

Myers 10MD05121 Submersible Effluent Pump Specifications

  • VOLTAGE: 1ø, 115V, 60Hz
  • HORSEPOWER: 0.5 HP
  • AMP DRAW (full load): 11.0
  • MAXIMUM HEAD: 230’
  • MAXIMUM CAPACITY: 18 GPM
  • DISCHARGE PIPE SIZE: 1-1/4"
  • MAXIMUM SOLIDS HANDLING: 0.08"
  • CORD LENGTH: 10' Type: SJTW-A, SJTW
  • BODY CONSTRUCTION: Stainless Steel/Composite
  • MAXIMUM LIQUID TEMPERATURE: 86°F (30°C)
  • DUTY RATING: Continuous

Myers MD Series Submersible Effluent Pump Performance Data

mdcurve.png


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

MYERS LIMITED WARRANTY

Myers® warrants to the original consumer purchaser (“Purchaser” or “You”) of the products listed below, that they will be free from defects in material and workmanship for the Warranty Period shown below

ProductWarranty Period whichever occurs first:
Jet pumps, small centrifugal pumps, submersible pumps and related
accessories
12 months from date of original installation, or 18 months from date of manufacture
Fibrewound Tanks5 years from date of original installation
Fibrewound Tanks5 years from date of original installation
Sump/Sewage/Effluent Products12 months from date of original installation, or 36 months from date of manufacture
Battery Backup Units
MBSP-2, MBSP-2C
MBSP-3, MBSP-3C
12 months from date of original installation, or 18 months from date of manufacture
24 months from date of original installation, or 30 months from date of manufacture
Wastewater Solids Handling Pumps12 months from date of shipment from factory or 18 months from date of manufacture

Our warranty applies only where such products are used in compliance with the requirements of the applicable product catalog and/or manuals. For additional information, please refer to the applicable standard limited warranty featured in the product manual.

Our warranty will not apply to any product that, in our sole judgement, has been subject to negligence, misapplication, improper installation, or improper maintenance. Without limiting the foregoing, operating a three phase motor with single phase power through a phase converter will void the warranty. Note also that three phase motors must be protected by three-leg, ambient compensated, extra-quick trip overload relays of the recommended size or the warranty is void.

Your only remedy, and MYERS’s only duty, is that MYERS repair or replace defective products (at MYERS’s choice). You must pay all labor and shipping charges associated with this warranty and must request warranty service through the installing dealer as soon as a problem is discovered. No request for service will be accepted if received after the Warranty Period has expired. This warranty is not transferable.

MYERS SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.

THE FOREGOING LIMITED WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE FOREGOING LIMITED WARRANTIES SHALL NOT EXTEND BEYOND THE DURATION PROVIDED HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on the duration of an implied warranty, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal rights and You may also have other rights which vary from state to state.

This Limited Warranty is effective April 1, 2014 and replaces all undated warranties and warranties dated before April 1, 2014.

We've been helping customers since 1953

Trust Guard Security Scanned