Zoeller Model 2137 High Temperature Submersible Pump Description
Our Model BN2137 Sump and Effluent Pump is designed to work in boiler blow down, hot water transfer, plant wash down, transformer vaults, and industrial steam cleaning applications where a pump rated for high temperature is required. The professional-grade, 1/2 HP Model 2137 is known for its dependability in intermittent direct contact applications of up to 200 °F (93 °C). The BN2137 is a nonautomatic pump equipped with a single piggyback float switch. The piggyback switch that is included is also designed for high temperature applications. The piggyback float switch allows you to set the on and off point of the pump in the field. This is ideal in an application with a deep sump pit or pump tank.
The Model 2137's switch case, motor housing, and pump housing are each constructed of cast iron. The cast iron vortex impeller has a smooth surface allowing water and solids to pass freely through the pump. The pump's identification tag, handle and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 2137 is able to withstand the most demanding applications.
Every pump is submerged in water and tested to its published performance curve, ensuring it meets you expectations and delivers peace of mind right-out-of-the-box.
Zoeller Model 2137 High Temperature Submersible Pump Typical Applications
- Boiler Blow Down
- Hot Water Transfer
- Plant Wash Down
- Transformer Vaults
- Industrial Steam Cleaning
Zoeller Model 2137 High Temperature Submersible Pump Features and Benefits
- Oil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating
- Cast Iron Vortex Impeller to Allow Free Passage of Solids which Prevents Clogging and Lessens Downtime
- Powder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments
- Stainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion over the Life of the Pump
- 100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected when you Receive it
- Comes with a 1-Year Limited Warranty Giving you Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product
Zoeller 2137-0005 High Temperature Submersible Pump Specifications
- VOLTAGE: 1ø, 115V, 60Hz
- HORSEPOWER: 0.5 HP
- AMP DRAW (full load): 10.7
- RPM: 1725 RPM
- MAXIMUM HEAD: 25'
- MAXIMUM CAPACITY: 90 GPM
- SWITCH TYPE: Variable Level Float Switch (VLFS)
- DISCHARGE PIPE SIZE: 1-1/2"
- IMPELLER TYPE: Cast Iron, Non-Clogging Vortex
- CORD LENGTH: 15' Power Cord and 10' Cord on VLFS
- CORD SIZE: 16-3 SOOW cord
- BODY CONSTRUCTION: Cast Iron
- MAXIMUM LIQUID TEMPERATURE: 200°F (93°C)
Zoeller Model 2137 High Temperature Submersible Pump Performance Curve
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Zoeller Limited Warranty
Manufacturer warrants, to the purchaser and subsequent owner during the warranty
period, every new product to be free from defects in material and workmanship
under normal use and service, when properly used and maintained, for a period
of one year from date of purchase by the end user, or 18 months from date of
original manufacture of the product, whichever comes first. Parts that fail within
the warranty period, one year from date of purchase by the end user, or 18 months
from the date of original manufacture of the product, whichever comes first, that
inspections determine to be defective in material or workmanship, will be repaired,
replaced or remanufactured at Manufacturer's option, provided however, that by so
doing we will not be obligated to replace an entire assembly, the entire mechanism
or the complete unit. No allowance will be made for shipping charges, damages,
labor or other charges that may occur due to product failure, repair or replacement.
This warranty does not apply to and there shall be no warranty for any material
or product that has been disassembled without prior approval of Manufacturer,
subjected to misuse, misapplication, neglect, alteration, accident or act of God; that
has not been installed, operated or maintained in accordance with Manufacturer's
installation instructions; that has been exposed to outside substances including
but not limited to the following: sand, gravel, cement, mud, tar, hydrocarbons,
hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive
substances, wash towels or feminine sanitary products, etc. in all pumping
applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or
other person to assume for us any other liability in connection with our products.
Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211,
Attention: Customer Service Department to obtain any needed repair or replacement
of part(s) or additional information pertaining to our warranty.
MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL,
CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED
OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR
A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED
TO THE DURATION OF THE EXPRESSED WARRANTY.
Some states do not allow limitations on the duration of an implied warranty, so
the above limitation may not apply to you. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.