Weinman End Suction Centrifugal Pump Product Description
Weinman pumps are designed for rugged and long, trouble free general service such as transfer of hot or chilled water and pressure boosting service. They eliminate maintenance, other than routine maintenance for years of economical service by incorporating the most advanced principles of hydraulic design. These pumps are built to meet and exceed the specifications for which they are engineered. In addition, every unit is made from the finest materials - precision machined, carefully fit together and then tested to ensure performance on the job. Weinman Types AC-B and AE-B pumps provide top performance at low operating and maintenance cost and low initial investment.
Weinman End Suction Centrifugal Pump Typical Application
- Municipal Buildings
- Utilities
- Hotels
- Supermarkets
- Irrigation Systems
- Apartment Buildings
- Office Buildings
- Food Processors
- Refrigerating
Weinman End Suction Centrifugal Pump Features
- Ni-Resist Stationary Face Type Seat Mechanical Shaft Seal (rated to 180˚F).
- Stainless Steel Shaft (56J/6B Frame)
- Bronze Shaft Sleeve (JM/6BA Frame)
- Neoprene Deflector Protects Motor or Bearing Frame for Longer Seal Life.
- Cast Iron, Back Pullout, Casing for Disassembly without Disturbing Pipe Connection.
- Bronze One Piece Impeller.
- Bearing Frame is Line Bored Cast Iron for Perfect Bearing Alignment
See Resources for Links to the Specifications and Pump Curves.
Call customer service for more details and pricing.
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Weinman End Suction Centrifugal Pump Product Resources
Download Weinman Models 100 & 200 End Suction Centrifugal Pumps Brochure
Download Weinman Model 100 4AC, 4AE, 6AC, 6AE, 8AC Specifications
Download Weinman Model 200 4AC, 4AE, 6AC, 6AD, 8AC Specifications
Download Weinman Model 200 End Suction Centrifugal Pump Materials of Construction
Download Weinman Model 100 End Suction Centrifugal Pump Assembly
Download Weinman Model 200 End Suction Centrifugal Pump Assembly
Download Weinman Model 100 AC & AE End Suction Centrifugal Pump Dimensions
Download Weinman Model 200 AC-B6 & AE-B6 End Suction Centrifugal Pump Dimensions
Download Weinman Model 200 AC-B6 & AE-B6 End Suction Centrifugal Pump, Steel Base Dimensions
Download Weinman Model 200 AC-BA6 & AE-BA6 End Suction Centrifugal Pump, Steel Base Dimensions
Download Weinman Model 100 3500RPM & 1750RPM Selection Curves
Download Weinman Model 200 3500RPM & 1750RPM Selection Curves
Download Weinman Model 100 & 200 4AC, 3500RPM & 1750RPM Performance Curve
Download Weinman Model 100 & 200 4AE, 3500RPM & 1750RPM Performance Curve
Download Weinman Model 100 & 200 6AC, 3500RPM & 1750RPM Performance Curve
Download Weinman Model 100 & 200 6AE, 3500RPM & 1750RPM Performance Curve
Download Weinman Model 100 & 200 8AC, 3500RPM & 1750RPM Performance Curve
Limited 24 Month Warranty
Crane Pumps & Systems warrants that products of our manufacture will be free of defects in material and workmanship under normal use and service for twenty-four (24) months after manufacture date, when installed and maintained in accordance with our instructions. This warranty gives you specifi c legal rights, and there may also be other rights which vary from state to state. In the event the product is covered by the Federal Consumer Product Warranties Law (1) the duration of any implied warranties associated with the product by virtue of said law is limited to the same duration as stated herein, (2) this warranty is a LIMITED WARRANTY, and (3) no claims of any nature whatsoever shall be made against us, until the ultimate consumer, his successor, or assigns, notifi es us in writing of the defect, and delivers the product and/or defective part(s) freight prepaid to our factory or nearest authorized service station. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply. THE SOLE AND EXCLUSIVE REMEDY FOR BREACH OF ANY AND ALL WARRANTIES WITH RESPECT TO ANY PRODUCT SHALL BE TO REPLACE OR REPAIR AT OUR ELECTION, F.O.B. POINT OF MANUFACTURE OR AUTHORIZED REPAIR STATION, SUCH PRODUCTS AND/OR PARTS AS PROVEN DEFECTIVE. THERE SHALL BE NO FURTHER LIABILITY, WHETHER BASED ON WARRANTY, NEGLIGENCE OR OTHERWISE. Unless expressly stated otherwise, guarantees in the nature of performance specifi cations furnished in addition to the foregoing material and workmanship warranties on a product manufactured by us, if any, are subject to laboratory tests corrected for fi eld performance. Any additional guarantees, in the nature of performance specifi cations must be in writing and such writing must be signed by our authorized representative. Due to inaccuracies in field testing if a conflict arises between the results of field testing conducted by or for user, and laboratory tests corrected for field performance, the latter shall control. RECOMMENDATIONS FOR SPECIAL APPLICATIONS OR THOSE RESULTING FROM SYSTEMS ANALYSES AND EVALUATIONS WE CONDUCT WILL BE BASED ON OUR BEST AVAILABLE EXPERIENCE AND PUBLISHED INDUSTRY INFORMATION. SUCH RECOMMENDATIONS DO NOT CONSTITUTE A WARRANTY OF SATISFACTORY PERFORMANCE AND NO SUCH WARRANTY IS GIVEN. This warranty shall not apply when damage is caused by (a) improper installation, (b) improper voltage (c) lightning (d) excessive sand or other abrasive material (e) scale or corrosion build-up due to excessive chemical content. Any modification of the original equipment will also void the warranty. We will not be responsible for loss, damage or labor cost due to interruption of service caused by defective parts. Neither will we accept charges incurred by others without our prior written approval. This warranty is void if our inspection reveals the product was used in a manner inconsistent with normal industry practice and/or our specific recommendations. The purchaser is responsible for communication of all necessary information regarding the application and use of the product. UNDER NO CIRCUMSTANCES WILL WE BE RESPONSIBLE FOR ANY OTHER DIRECT OR CONSEQUENTIAL DAMAGES,INCLUDING BUT NOT LIMITED TO TRAVEL EXPENSES, RENTED EQUIPMENT, OUTSIDE CONTRACTOR FEES, UNAUTHORIZED REPAIR SHOP EXPENSES, LOST PROFITS, LOST INCOME, LABOR CHARGES, DELAYS IN PRODUCTION, IDLE PRODUCTION, WHICH DAMAGES ARE CAUSED BY ANY DEFECTS IN MATERIAL AND/OR WORKMANSHIP AND/OR DAMAGE OR DELAYS IN SHIPMENT. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No rights extended under this warranty shall be assigned to any other person, whether by operation of law or otherwise, without our prior written approval