Myers MWS5 Series Sewage Pump Descriptions

The MWS5 Submersible Sump/Effluent and 1/2-HP Sewage Pumps are designed for effluent and wastewater removal, sump drainage, dewatering and flood control. Units have built in thermal overload protection with automatic reset. The mechanical seal and bearings on the motor shaft are permanently lubricated. Stainless steel hardware and a heavy duty lift out ring allow easy disassembly after extended use..

Myers MWS5 Series Sewage Pump Applications

• Residential Sewage/Dewatering
• Effluent/Wastewater Transfer
• Sump Drainage

Myers MWS5 Series Sewage Pump Features

• Solids Handling – 2” Spherical Capabilities.
• Overload Protection – Built-In Thermal Overload with Automatic Reset.
• Bearing and Mechanical Seal – Permanently Lubricated for Long Life.
• Stainless Steel Hardware – Allows for Easy Disassembly After Extended Service.
• Serviceability – Heavy duty Lift-Out Ring.
• Controls – Standard Controls Available for Automatic Operation.
• Cord Design – In-Field Replaceable 50’ Cord Available, 115 Volt Only.

Myers MWS550110T Series Sewage Pump Specifications

• VOLTAGE: 1ø, 115V, 60Hz
• HORSEPOWER: 0.5 HP
• AMP DRAW (full load): 13.0
• MOTOR TYPE: Oil Filled w/ Built-In Thermal Overload Protection
• RPM: 1725
• MAXIMUM HEAD: up to 17.5'
• MAXIMUM CAPACITY: up to 134 GPM
• SWITCH TYPE: Tethered
• SWITCH 'ON' LEVEL: 16”
• SWITCH 'OFF' LEVEL: 7"
• DISCHARGE PIPE SIZE: 3.0" NPT Vertical
• MAXIMUM SOLIDS HANDLING SIZE: 2.0"
• IMPELLER TYPE: Reinforced Noryl w/ Brass Threaded Insert, Vortex
• CORD LENGTH: 10' TYPE: SJTW-A/SJTW
• CORD SIZE: 16-3; Type: Water Resistant, UL Listed Integrally Grounded 3-Prong Plug
• BODY CONSTRUCTION: Cast Iron
• MAXIMUM LIQUID TEMPERATURE: 130°F (55°C)
• DUTY RATING: Continuous

Myers MWS5 Series Sewage Pump Performance Curve

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Myers MWS5 Series Sewage Pump Product Resources

Download Myers MWS5 Series Specification Data

Download Myers MWS5 Series Installation & Service Manual