Littelfuse RM1000 Remote Monitor Description

The RM1000 is a motor monitoring device to be used in conjunction with 777 family of products (excluding the P1 Series) 77C family of products and the 601 voltage monitors, via Modbus protocol with a communications module. The RM1000/777 motor management system combines unsurpassed electronic motor protection and critical, user-friendly motor monitoring.

The RM1000 Series can monitor up to 16 relays through an RS-485 network using Modbus RTU protocol. A second communication port allows monitoring and control of up to 99 relays from a computer, PLC, DCS or SCADA system and can be accessed from the host computer or PLC with RM1000 acting as a repeater for any of its motor protectors. In addition to the monitoring functions, the RM1000 can be used to reset a tripped relay.

Littelfuse RM1000 Remote Monitor Features

Displays:

• Individual Line Currents and Average Current
• Current and Voltage Unbalance
• Individual Phase Voltages and Average Voltage
• Displays Last Four Faults, Trip Reason, and Restart Timer Status
• MotorSaver® and/or PumpSaver® Setpoints
• Run-Hours on Each Motor
• Warning of Pending (imminent) Faults

Controls:

• Reset Run-Hour Meter
• Reset MotorSaver® or PumpSaver®
• Change Setpoints From the RM1000

Convenience:

• Power from RS485MS-2W Communications Module
• Monitor up to 16 777s With One Display
• NEMA 3R Outdoor Rated
• Secondary Steel Enclosure Available

Littelfuse RM1000 Remote Monitor Specifications

Control Power . . . . . . . . . . . . 12-24VDC (Supplied by RS485MS-2W)

Mechanical Life . . . . . . . . . . . . 100,000 actuations

Overlay Material . . . . . . . . . Polyester

UV Exposure w/o degradation . . . . . . . . . . . . . . 2000 hrs

Terminal Torque (depluggable terminal block). . . . . . . . . 3 in.-lbs

Panel Thickness . . . . . . . . . 0.03” min, 0.12” max

Temperature Range

• Operating. . . . . . . . . . . . . . . . . . . . . -40° to 70°C (-40° to 158°F)
• Storage . . . . . . . . . . . . . . . . . . . . . -40° to 80°C (-40° to 176°F)

Maximum Input Power . . . . . . . . . . . . . . . . . . . . .100mA

Relative Humidity . . . . . . . . . . . . . . . . . . . . . Up to 85%, non-condensing

Safety Mark

• UL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .UL508 (File #E68520)
• CSA . . . . . . . . . . . . . . . . . . . . . . 22.2 No. 14 (File #46510)
• CE . . . . . . . . . . . . . . . . . . . . . . . IEC 60947-6-2

Enclosure Material. . . . . . . . . . . . . . . . . . . . . Black polycarbonate

Display. . . . . . . . . . . . . . . . . . . . .Liquid Crystal with extended temp. range

Size. . . . . . . . . . . . . . . . . . . . .2 rows x 16 characters

Keypad. . . . . . . . . . . . . . . . . Six 0.5” stainless steel dome buttons for tactile feedback

Weight . . . . . . . . . . . . . . . . . . . . . . . . 24 oz.

Mounting Method . . . . . . . . . . . Surface mountable on backplane using 4 screws

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Littelfuse RM1000 Remote Monitor Resources

Littelfuse RM1000 Remote Monitor Product Specifications

Littelfuse RM1000 Remote Monitor Engineering Specifications