Zoeller N153 Oil Guard Pump System 940 Description
The Oil Smart Switch is factory calibrated and set up for immediate installation and operation. The dielectric design is extremely sensitive to variations in dielectric constant of air, water, oil and/or hydrocarbons. The Zoeller N153 Oil Guard Pump System 940 was designed to help protect the environment and equipment from the dispersion of oils and/or hydrocarbons. Applications include elevator sumps, transformer vaults and manufacturing facilities.
Zoeller N153 Oil Guard Pump System 940 Features and Benefits
-
NEMA-4X Alarm Panel Enclosure
-
Audible, Light Alarms and Dry Contacts
-
Preset ‘on’ and ‘off’ Points Differentiates
Between Oil and Water and Alerts Maintenance Personnel of High
Water or Oil Detected Conditions
-
20 ft. Piggyback Electrical Supply Cord
-
20 Amp Internal Relay
-
Alarm Test and Silence Switches
-
304 Stainless Steel Probes
-
UL508 Approved Switch
Pump features:
-
Durable, Cast Iron Construction
-
Powder Coated Epoxy Finish
-
All Stainless Steel Fittings
Simplex Panel features:
-
Oil Smart® Pump Switch (10-1528)
-
115 Volts, Single Phase
-
NEMA 4X Watertight Enclosure With Lockable Latch
-
30 Amp Motor Start Relay
-
Pump HOA Switch
-
Top Mounted Red Alarm Beacon Light
-
81-84 Decibel Rated Alarm Horn
-
Horn Silence and Alarm Test Switches
-
Alarm Automatically Resets
-
Dry Auxiliary Alarm Contacts
-
Separate Circuit Protection for Alarm
-
Circuit Breaker Protection
Duplex Panel features:
-
Oil Smart® Pump Switch (10-1528)
-
115 Volts, Single Phase
-
NEMA 4X Watertight Enclosure With Lockable Latch
-
Two 30 Amp Motor Start Relays
-
Pump HOA Switch
-
Top Mounted Red Alarm Beacon Light
-
81-84 Decibel Rated Alarm Horn
-
Horn Silence and Alarm Test Switches
-
Alarm Automatically Resets
-
Dry Auxiliary Alarm Contacts
-
Separate Circuit Protection for Alarm
Zoeller Model N153 Oil Guard Pump System 940 Specifications
- VOLTAGE: 1ø, 115V, 60Hz
- HORSEPOWER: 0.5 HP
- AMPS: 10.5
- MOTOR TYPE: Permanent Split Capacitor
- RPM: 3450 RPM
- MAX HEAD: 44'
- MAX FLOW RATE: 77 GPM
- DISCHARGE SIZE: 1 1/2" NPT
- SOLIDS HANDLING: 3/4" Spherical Solid
- IMPELLER TYPE: Engineered Thermoplastic, Non-Clogging Vortex
- CORD LENGTH: 20'
- BODY CONSTRUCTION: Cast Iron
- MAXIMUM OPERATING TEMPERATURE: 130°F (54C)
Zoeller N153 Oil Guard Pump System 940 Performance Curve
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Zoeller Limited Warranty
Manufacturer warrants, to the purchaser and subsequent owner during the warranty
period, every new product to be free from defects in material and workmanship
under normal use and service, when properly used and maintained, for a period
of one year from date of purchase by the end user, or 18 months from date of
original manufacture of the product, whichever comes first. Parts that fail within
the warranty period, one year from date of purchase by the end user, or 18 months
from the date of original manufacture of the product, whichever comes first, that
inspections determine to be defective in material or workmanship, will be repaired,
replaced or remanufactured at Manufacturer's option, provided however, that by so
doing we will not be obligated to replace an entire assembly, the entire mechanism
or the complete unit. No allowance will be made for shipping charges, damages,
labor or other charges that may occur due to product failure, repair or replacement.
This warranty does not apply to and there shall be no warranty for any material
or product that has been disassembled without prior approval of Manufacturer,
subjected to misuse, misapplication, neglect, alteration, accident or act of God; that
has not been installed, operated or maintained in accordance with Manufacturer's
installation instructions; that has been exposed to outside substances including
but not limited to the following: sand, gravel, cement, mud, tar, hydrocarbons,
hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive
substances, wash towels or feminine sanitary products, etc. in all pumping
applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or
other person to assume for us any other liability in connection with our products.
Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211,
Attention: Customer Service Department to obtain any needed repair or replacement
of part(s) or additional information pertaining to our warranty.
MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL,
CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED
OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR
A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED
TO THE DURATION OF THE EXPRESSED WARRANTY.
Some states do not allow limitations on the duration of an implied warranty, so
the above limitation may not apply to you. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.