Zoeller Model 105 Drain Pump Basin Kit Description
The Model 105 Drain Pump is an ideal choice for standard drain pump applications when a gravity drain is not accessible. The drain pump eliminates the need to break concrete to install a sink drain. It is often used when adding a kitchen or wet bar in an unfinished basement. It allows you to pump the unwanted water to any discharge point desired.
Our drain pump is also used to handle the wastewater from coffee bars, utility sinks, wet bar sinks, ice machine discharge, dishwashers, air conditioning condensate and much more. Our popular Model 105 Drain Pump is constructed with a polypropylene, corrosion-resistant basin and comes with 3/10 HP submersible sump pump capable of passing solids up to 1/2-inch. For added convenience, the check valve with union is included.
The discharge, vent and inlet openings are already built into the basin so installation is quick and straight forward. The pump can pass laundry lint, making this drain pump model ideal for laundry tray pumps. All pumps utilize a non-clogging vortex impeller, a reliable system that reduces the chances of clogging and backups.
Peace of mind right-out-of-the-box! Less hassle. Less mess.
Zoeller Model 105 Drain Pump Basin Kit Features and Benefits
- System Includes 3/10 HP Automatic Pump, Tank Assembly and Check Valve
- Non-Clogging Vortex Impeller Capable of Passing 1/2" Spherical Solids Reducing the Potential for Clogs
- 11-3/4" x 12-1/2" Basin with Small Footprint so it is Easily Installed in a Base Cabinet Under the Sink, Beneath a Utility Sink or in a Compact Area
- Cover Includes: 1-1/2" Discharge, 1-1/2" Inlet, 2" NPT Vent and Cord Seal Opening
- 3-Year Limited Warranty on Pump Provides you with Peace of Mind Right Out of the Box
Zoeller Model M53 Sump Pump Specifications
- VOLTAGE: 1ø, 115V, 60Hz
- HORSEPOWER: 0.33 HP
- AMP DRAW (full load): 9.7
- MOTOR TYPE: Shaded Pole
- RPM: 1550 RPM
- MAXIMUM HEAD: 19'
- MAXIMUM CAPACITY: 43 GPM
- DISCHARGE PIPE SIZE: 1-1/2" NPT
- MAXIMUM SOLIDS HANDLING: 1/2" Spherical Solid
- IMPELLER TYPE: Cast Iron, Non-Clogging Vortex
- CORD LENGTH: 9' UL Listed, 3-Wire Cord and Plug
- BODY CONSTRUCTION: Cast Iron
- MAXIMUM OPERATING TEMPERATURE: 130°F (54C)
Zoeller Model 105 Drain Pump Basin Kit Performance Curve
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Zoeller Limited Warranty
Manufacturer warrants, to the purchaser and subsequent owner during the warranty
period, every new product to be free from defects in material and workmanship
under normal use and service, when properly used and maintained, for a period
of one year from date of purchase by the end user, or 18 months from date of
original manufacture of the product, whichever comes first. Parts that fail within
the warranty period, one year from date of purchase by the end user, or 18 months
from the date of original manufacture of the product, whichever comes first, that
inspections determine to be defective in material or workmanship, will be repaired,
replaced or remanufactured at Manufacturer's option, provided however, that by so
doing we will not be obligated to replace an entire assembly, the entire mechanism
or the complete unit. No allowance will be made for shipping charges, damages,
labor or other charges that may occur due to product failure, repair or replacement.
This warranty does not apply to and there shall be no warranty for any material
or product that has been disassembled without prior approval of Manufacturer,
subjected to misuse, misapplication, neglect, alteration, accident or act of God; that
has not been installed, operated or maintained in accordance with Manufacturer's
installation instructions; that has been exposed to outside substances including
but not limited to the following: sand, gravel, cement, mud, tar, hydrocarbons,
hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive
substances, wash towels or feminine sanitary products, etc. in all pumping
applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or
other person to assume for us any other liability in connection with our products.
Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211,
Attention: Customer Service Department to obtain any needed repair or replacement
of part(s) or additional information pertaining to our warranty.
MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL,
CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED
OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR
A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED
TO THE DURATION OF THE EXPRESSED WARRANTY.
Some states do not allow limitations on the duration of an implied warranty, so
the above limitation may not apply to you. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.