SJE-Rhombus Model IFS Single Phase 120/208/240V Simplex Control Panel

Single Phase Simplex Demand/Timed Dose Control Panel Description

Demand Dose or Timed Dose, Float or C-Levell™ Sensor Controlled System for Pump Control and System Monitoring

The Next Generation IFS simplex control panel utilizes and innovative circuit board design enclosed in a touch-safe housing to control one 120/208/240V single phase pump in water and sewage applications. These newly redesigned IFS panels feature an easy-to use color LCD interface located on the inner door for programming and system monitoring. The panel configuration can be easily converted in the fields to either a timed dose or demand dose through the LCD interface. Available with the EZconnex® float system.

The panel can be easily be changed in the field to utilize either floats or the patented C-Level™ sensor for continuous level monitoring. The C-Level™ sensor sensed the level in the tank and sends a signal to the panel. Pump activation levels can be adjusted by using the LCD interface. C-Level™ CL40 sensor operating range is 3-39.9 inches (7.6-101.3 cm). C-Level™ CL100 operating range is 3-99.5 inches (7.6-252.7 cm).

SJE-Rhombus Model IFS Single Phase Simplex Panel Features

LED Interface Features:

Full Color Graphics and Menu Navigation Encoder for Easy Setup
Touch Safe Housing
C-Level™ Sensor or Float Operation Selectable via Menu Navigation
Demand or Timed Dose Operation Selectable via Menu Navigation
Tank Level Indication and Setpoint Monitoring At-A-Glance
Lead Pump is Easily Identified by a Graphic Ring Around the Current Lead Pump Regardless of Control Mode (timed dose or demand)
Displays Remaining Time in Each Active ON or OFF Timed Dose Mode, as Well as At-A-Glance ON or OFF Time Elapsed Graphic Around Lead Pump
RJ45 Communication Connector
Flashing Function for Alarm Beacon and Horn (configurable)
Manual Alarm reset (configurable)
UL/cUL Listed
Five-Year Limited Warranty on Panel
Two-Year Limited Warranty on C-Level™ Sensor

SJE-Rhombus Model IFS Single Phase Simplex Panel Specifications

LCD INTERFACE FEATURES:

Full Color Graphics and Menu Navigation Encoder for Easy Setup.
Touch Safe Housing
Pump Hand/Off/Auto Control Selectable via Menu Navigation.
C-Level™ Sensor or Float Operation Selectable via Menu Navigation.
Demand or Timed Dose Operation Selectable via Menu Navigation.
Tank Level Indication and Setpoint Monitoring At-A-Glance.
Lead Pump is Easily Identified by a Graphic Ring around the Current Lead Pump Regardless of Control Mode (timed dose or demand).
Displays Remaining Time in Each Active ON or OFF Timed Dose Mode, as Well as At-A-Glance ON or OFF Time Elapsed Graphic Around Lead Pump.
RJ45 Communication Connector.
Flashing Function for Alarm Beacon and Horn (configurable)
Manual Alarm Reset (configurable).

PANEL COMPONENTS:

Enclosure measures 12 x 10 x 6 inches NEMA 4X (ultraviolet stabilized thermoplastic, padlockable with integral mounting flanges, drip shield, heavy duty cover latches, and stainless steel 1/4 turn set screw; for outdoor or indoor use)
Red Alarm Beacon Provides 360° Visual Check of Alarm Condition.
Circuit Breaker Provides Pump Power Disconnect and Branch Circuit Protection Included as Standard on all Panels
C-Level™ Sensor and Float Connection Terminal Blocks
Controller Features:

Incoming Control/Alarm Power Terminal Blocks
Control/Alarm Power/ System Status Green LED Indicators Illuminate if Control/Alarm is Present and Controller is Operating*
Controller Status Green LED Indicators for: Power/Active, Float Input Status, Pump Run, C-Level Active*
Normally Open Auxiliary Alarm Contacts Included as Standard
Control Power On/Off Switch
Green LED Pump Run Indicators Illuminate when Pump is Called to Run*
Control Panel Able to Operate if LCD Interface Fails or is Disconnected
Touch Safe Housing

Alarm Horn Provides Audible Warning of Alarm Condition (not shown)
Exterior Alarm Test/Silence Push Button Allows Horn and Light to be Tested and Horn to be Silenced in an Alarm Condition; Alarm Automatically Resets Once Alarm Condition is Cleared (not shown)
Modbus Port (RJ45) for Future Expansion - eg. Seal Fail Modules, Remote Monitoring, Valve Control, In-Site®, Logging, etc.. (not shown)

* In Fault Condition, LED Indicators will be Red.

NOTE: Added Options, Voltage and Amp Range Selected May Change Enclosure Size and Enclosure Features, and Component Layout

NOTE: Schematic/Wiring Diagram and Pump Specification Label are Located Inside the Panel on Enclosure Cover.

WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

SJE-Rhombus Model IFS - Single Phase Simplex Pump Control

SJE-Rhombus Model IFS - Single Phase Simplex Control Panel Catalog Page

SJE-Rhombus Model IFS - Single Phase Simplex Control Panel Installation Instructions

SJE-Rhombus Model IFS - C-level Sensor Installation Instructions

SJE-Rhombus Model IFS - Single Phase Simplex Control Panel Level Monitoring Brochure

SJE Rhombus Limited Warranty Policy

Five-Year Limited Warranty Policy We Stand Behind Our Products!

Effective for products manufactured after January 1, 2014

SJE-Rhombus warrants to the original consumer that this product shall be free of manufacturing defects for five years* after the date of consumer purchase. During that time period and subject to the conditions set forth below, SJE-Rhombus will repair or replace, for the original consumer, any component which proves to be defective due to defective materials or workmanship of SJE-Rhombus.

THE FIVE-YEAR LIMITED WARRANTY DOES NOT APPLY TO THE MOTOR START KIT COMPONENTS. SJE-RHOMBUS WILL WARRANTY MOTOR START KIT COMPONENTS, SUPPLIED BY SJE-RHOMBUS FOR ONE YEAR. SJE-RHOMBUS MAKES NO WARRANTIES OF ANY TYPE WITH RESPECT TO MOTOR START KITS SUPPLIED BY A CUSTOMER.

ELECTRICAL WIRING AND SERVICING OF THIS PRODUCT MUST BE PERFORMED BY A LICENSED ELECTRICIAN.

This warranty does not apply to: (a) damage due to lightning or conditions beyond the control of SJE-Rhombus; (b) defects or malfunctions resulting from units not installed, operated, or maintained in accordance with instructions provided, applicable local codes, ordinances, or accepted trade practices; (c) failures resulting from abuse, misuse, accident, or negligence; or (d) units repaired and/or modified without prior authorization from SJE-Rhombus.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

TO OBTAIN WARRANTY SERVICE: The consumer shall assume all responsibility and expense for removal, reinstallation, and freight. Any item to be repaired or replaced under this warranty must be returned to SJE-Rhombus, or such place as designated by SJE-Rhombus. Contact customer service at 1-888-DIAL-SJE (1-888-342-5753) for a Return Materials Authorization number (RMA) on any product being returned for a warranty claim.

ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS ARE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. SJE-RHOMBUS SHALL NOT, IN ANY MATTER, BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES AS A RESULT OF A BREACH OF THIS WRITTEN WARRANTY OR ANY IMPLIED WARRANTY.

*Build-A-Panel™ Plus Control Panels and Engineered Custom panels carry a two-year limited warranty (or as quoted). The pressure transducer included with VARIOspeed® products carries a one-year limited warranty.