Commercial/Municipal/Industrial Supplier for Idaho. Commercial Supplier for Washington and Oregon.

Hydromatic S4NRC/S4NVX Submersible Solids Handling Pumps Description

Hydromatic S4NRC/S4NVX Submersible Solids Handling Pumps is designed to meet the demands of Municipal, Commercial and Industrial Areas.

Hydromatic S4NRC/S4NVX Submersible Solids Handling Pumps Typical Application

• Municipal
• Commercial
• Industrial

Hydromatic S4NRC/S4NVX Submersible Solids Handling Pumps Superior Features

• Oil filled motor efficiently dissipates heat and locks out damaging moisture so you receive reliable pumping service. Easily field serviceable.
• Standard construction is cast iron.
• Stainless steel shaft eliminates corrosion and fatigue for longer pump life. The minimum shaft overhang decreases bearing and seal life. Tapered shaft allows for easy removal of impeller.
• Available with a wide range of impellers for different applications. Pump-out vanes on the top shroud prevent the buildup of materials in the seal area and extend the life of the thrust bearing by significantly reducing axial thrust.
• The connection box has two epoxy barriers and a compression fitting that prevent water contamination of the motor area, assuring long-term reliable operation. In addition, epoxy encapsulation and stripped leads positively eliminate "wicking" from the cable
• Heavy duty upper and lower ball bearings are submerged in oil to provide permanent lubrication and ensure long service life.
• Easily replaceable, true wear ring, with a top pullout design for easy disassemble operation.

Hydromatic S4NRC100M6-6 Technical Details

• BODY CONSTRUCTION: Class 30 Cast Iron
• HORSEPOWER: 1.0 HP
• RPM: 1150
• MAXIMUM HEAD: up to 22'
• MAXIMUM CAPACITY: up to 185 GPM
• DISCHARGE PIPE SIZE: 4" 125# Flange Discharge
• MAXIMUM SOLIDS HANDLING SIZE: 3"
• CORD LENGTH: 35' Standard
• OPTIONAL CORD LENGTH: 50'
• CORD SIZE: 14-4; Type: SOOW/W
• AMP DRAW (full load): 4.3
• VOLTAGE: 3ø, 200V
• MAXIMUM LIQUID TEMPERATURE: 140°F
• MOTOR: Enclosed, Oil Cooled Induction, VFD Suitable
• IMPELLER CONSTRUCTION: Balanced, Recessed, 8 Vane, Semi-Open Vortex, Ductile Iron, ASTM A536
• IMPELLER SIZE: 6.38"
• Section 300

Hydromatic S4NRC/S4NVX Submersible Solids Handling Pumps Curve

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Hydromatic S4NRC/S4NVX Submersible Solids Handling Pumps Product Resources

Download Hydromatic S4NRC Sales Brochure

Download Hydromatic S4NRC Electrical Data

Download Hydromatic S4NRC Technical Data

Download Hydromatic S4NRC Performance Curve

Download Hydromatic S4NRC Installation & Service Manual

Download Hydromatic S4NRC Dimensional Data

Download Hydromatic S4NRC Specification Data