Commercial/Municipal/Industrial Supplier for Idaho. Commercial Supplier for Washington and Oregon.

Hydromatic H4H Submersible Solids Handling Pumps Description

Hydromatic H4H Submersible Solids Handling Pumps enhanced performance is made possible by an improved mono-vane impeller which helps eliminate clogs.

Hydromatic H4H Typical Application

• Municipal
• Commercial
• Industrial

Hydromatic H4H Superior Features

• Oil filled motor efficiently dissipates heat and locks out damaging moisture so you receive reliable pumping service. Easily field serviceable.
• Standard construction is cast iron.
• Stainless steel shaft eliminates corrosion and fatigue for longer pump life. The minimum shaft overhang decreases bearing and seal life. Tapered shaft allows for easy removal of impeller.
• Available with a wide range of impellers for different applications. Pump-out vanes on the top shroud prevent the buildup of materials in the seal area and extend the life of the thrust bearing by significantly reducing axial thrust.
• The connection box has two epoxy barriers and a compression fitting that prevent water contamination of the motor area, assuring long-term reliable operation. In addition, epoxy encapsulation and stripped leads positively eliminate "wicking" from the cable
• Heavy duty upper and lower ball bearings are submerged in oil to provide permanent lubrication and ensure long service life.
• Easily replaceable, true wear ring, with a top pullout design for easy disassemble operation.
• Passes a full 3" diameter nondeformable spherical solid per the Ten States Standards.

Hydromatic H4H1500M3-4 Technical Details

• VOLTAGE: 3ø, 230/460V 60Hz
• HORSEPOWER: 15 HP
• AMP DRAW (full load): 44.5
• MOTOR TYPE: Enclosed, Oil Cooled Induction, VFD Suitable
• RPM: 1750
• MAXIMUM HEAD: up to 74'
• MAXIMUM CAPACITY: up to 950 GPM
• SWITCH TYPE: Manual
• DISCHARGE PIPE SIZE: 4" 125# ANSI Flange Discharge
• MAXIMUM SOLIDS HANDLING SIZE: 3" Spherical
• IMPELLER TYPE: Balanced, Enclosed, Mono Vane, Ductile Iron, ASTM A536
• IMPELLER DIAMETER: 10"
• CORD LENGTH: 35' Standard
• CORD SIZE: 8-4; Type: SOOW/W
• OPTIONAL CORD LENGTH: 50'
• BODY CONSTRUCTION: Class 30 Cast Iron
• MAXIMUM LIQUID TEMPERATURE: 140°F

Hydromatic H4H Pump Curve

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Hydromatic H4H Product Resources

Download Hydromatic H4H Sales Brochure

Download Hydromatic H4H Electrical Data

Download Hydromatic H4H Technical Data

Download Hydromatic H4H Performance Curve

Download Hydromatic H4H Installation & Service Manual

Download Hydromatic H4H Dimensional Data

Download Hydromatic H4H Specification Data