Prev Next

A.Y.McDonald 24050L2A Stainless Steel Pump & Motor 15 GPM 0.5 HP 115V 2-Wire Single-Phase

Price: $1,119.95
Quantity:
+ -
Usually ships within 2 weeks
SKU: AYM24050L2A


Shipping Weight:
24.0 LBS
Shipping Dimensions
Length: 5 In
Width: 5 In
Height: 19 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

lserieslogo6002.png

A.Y. McDonald offers a full line of four-inch submersibles ranging from 1/2 through 5 horsepower, with flow rates ranging from 5 through 25 GPM. The 24000 Series stainless steel submersibles offer peak capacity performance in 5, 7, 10, 15, 20, and 25 GPM models. 

All L Series Stainless Steel Submersible Pumps are designed to pump within the 15 gallons per minute (GPM) range. Sizes are available from 1/2 to 5 HP. All models are standard with 1-1/4” NPT discharge.

A.Y. McDonald 24000 Series Stainless Steel Well Pump Applications

  • Residential and Commercial Submersible Deep Well Pumping Applications
  • Reservoir
  • Treatment System Dosing

A.Y. McDonald 24000 Series Stainless Steel Well Pump Features

  • Powered by NEMA Approved A.Y. McDonald Stainless Steel Motor
  • Single Phase Motors Include Built-In Lightning Protection
  • 300 Series Stainless Steel Corrision Resistant Discharge, Easy Wrench Design, Built in Safety Eye, Threads Into Shell
  • Built-In Stainless Steel Check Valve
  • Durable Polycarbonate Diffuser. Corrosion and Abrasion Resistant and Designed for Efficient Performance and Superior Sand Handling Capability
  • Floating Type Noryl Impellers
  • Stainless Steel Cable Guard Protect Motor Leads. Angled Top Helps Keep Leads Stationary When Lowering and Raising Submersible Pump
  • Rubber Discharge Bearing Surrounding the Stainless Steel Shaft Provides Superior Wear Resistance Against the Harshest Conditions
  • The Captured Time-Proven Stack Design Incorporates Sand Notches into the Diffusers, Which has Proven, Over Time, to Keep Sand Flowing Thru the Stack
  • One Piece Replacement Impeller Stack Cartridge Design Simplifies Field Service
  • Heavy Stainless Steel Shell Threaded at Both Ends for Easy Field Service
  • 304 Stainless Steel Pump Shaft
  • Motor Bracket Built to NEMA Dimensional Standards in Stainless Steel
  • Each Pump is Assembled and Then Individually Tested to Assure Performance Within Design Specifications
  • Each Pump is Stamped with the Tester's "Signature" Marking to Assure Quality Control

A.Y. McDonald 24050L2A Stainless Steel Well Pump Specifications

    Water Well Motor
  • BODY CONSTRUCTION: 304 Stainless Steel
  • HORSEPOWER: 0.5 HP
  • CABLE LENGTH: 5-1/2 ft.
  • VOLTAGE: 1ø, 115V
  • RPM: 3450
  • SERVICE FACTOR: 1.6
  • DOWNWARD THRUST (lbs): 500 lbs
  • MAX AMBIENT TEMPERATURE: 95°F/35°C
  • FULL LOAD AMPS: 8.6
  • FLANGE: NEMA 4"
  • MAX OPERATING DEPTH: 984 ft
  • LEAD: 2-wire

  • Water Well Pump End
  • DISCHARGE SIZE: 1.25” FNPT
  • NOMINAL FLOW RATING: 15 GPM
  • HORSEPOWER: 0.5 HP
  • MAXIMUM CAPACITY: 24.5 GPM
  • MAXIMUM HEAD: 152’
  • STAGES: 5
  • IMPELLER DESIGN: Floating Stack
  • IMPELLER MATERIAL: Noryl
  • BODY MATERIAL: 300 Series Stainless Steel

A.Y. McDonald 24000 L Series Stainless Steel Well Pump Curve

2400-l-series-pump-curve.jpg


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

A.Y. McDonald "Limited Warranty"

LIMITED WARRANTY Subject to the limitations stated herein, A.Y. McDonald Mfg. Co. ("Seller") warrants that pumps and pump accessories manufactured by Seller shall be free from defects in material and workmanship and shall perform the services for which they are intended when properly installed, under normal use, and under ordinary conditions, for a period of two (2) years from the date of manufacture or one (1) year from the date of installation, whichever is earliest. Other warranty periods may apply to certain products noted below. This Limited Warranty does not cover or apply to water service products, plumbing products, or high pressure gas products manufactured by Seller. Buyer must notify Seller in writing of a potentially defective product as soon as possible, which notice must provide the serial and model numbers of the product and a description of the potential defect. Upon receipt of such notice, Seller shall, at its option and at its expense, examine such product at Seller's factory or such other location as Seller shall determine. Should Seller agree to a return of the product, buyer shall follow in every respect the packaging and transportation instructions provided by Seller. In no case shall a product be returned without first obtaining the permission of Seller. If a product is proven to the satisfaction of Seller to be defective, then Seller shall, at its option and at its expense, repair or replace such product or reimburse buyer for the price paid by buyer for such product, and credit will be issued to buyer to offset the expense of the return shipment to Seller for shipments within the continental United States. The cost of shipping to buyer a repaired or replaced product shall be paid by Seller on the same shipping terms as the original shipment of such product to buyer. Except as stated herein, buyer shall assume all responsibility and expense for any dismantling, removal, reinstallation, and shipping in connection with this Limited Warranty, and no claims will be allowed for labor, shipping, materials, or other costs incident to the repair, replacement, or return of a product.

THIS LIMITED WARRANTY IS THE ONLY WARRANTY PROVIDED BY SELLER AND IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

SELLER'S LIABILITY IS LIMITED TO REPAIR, REPLACEMENT, OR REIMBURSEMENT AS PROVIDED ABOVE, AND IN NO EVENT SHALL SELLER'S LIABILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT(S) INVOLVED. THIS LIMITED WARRANTY PROVIDES THE EXCLUSIVE REMEDY AGAINST SELLER FOR CLAIMS RELATING TO PRODUCTS, WHETHER IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE), OR UNDER ANY OTHER LEGAL THEORY, AND WHETHER ARISING OUT OF WARRANTIES, REPRESENTATIONS, INSTRUCTIONS, OR DEFECTS FROM ANY CAUSE. IN NO EVENT SHALL SELLER BE LIABLE FOR OR OBLIGATED TO PAY ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES OF ANY KIND.

THIS LIMITED WARRANTY EXTENDS ONLY TO BUYERS WHO PURCHASE SELLER'S PRODUCT(S) DIRECTLY FROM SELLER ("ORIGINAL PURCHASERS"), INCLUDING DISTRIBUTORS, WHOLESALERS, UTILITIES, AND CONTRACTORS. THIS LIMITED WARRANTY IS NOT ASSIGNABLE OR OTHERWISE TRANSFERRABLE BY THE ORIGINAL PURCHASER TO ANY OTHER PARTY. SELLER EXTENDS NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TO "CONSUMERS," AS THAT TERM IS DEFINED IN THE MAGNUSONMOSS WARRANTY ACT (15 U.S.C. SECTIONS 2301 ET SEQ.) AND THE REGULATIONS PROMULGATED THEREUNDER. IN NO EVENT SHALL THE DURATION OF ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE BE LONGER THAN THE PERIOD PRESCRIBED HEREIN.

This Limited Warranty shall not apply to product failure or defect: caused by sand or abrasive materials in water, corrosion due to aggressive waters, storm, fire, wind, accident, or similar casualty, or improper electrical supply; due to a defect in the design, engineering, or installation of any water or other system; where the product has been modified without the prior written authority of Seller; caused by the failure to install or use the product in conformity with any instructions or specifications provided by Seller; caused by the improper installation, use, application, maintenance, repair, transportation, handling, or storage of the product; caused by the fault or negligence of anyone other than Seller or any other act or event beyond the control of Seller. Seller makes no warranties as to any products or product parts or components that are not manufactured by Seller, and such items (including the motors, tanks, air volume controls, and pressure switches that may be a part of the pump system) may be warranted only to the extent of the original manufacturer's warranty, if any. The limitations of liability contained in this Limited Warranty shall be effective without regard to Seller's performance or failure or delay of performance under any other term or condition of any trade customs, warranty, or other agreement. No employee, representative, or agent of Seller, nor any other person, has authority to assume or incur on behalf of Seller any liability, obligation, or responsibility in place of or in addition to this Limited Warranty."

The following warranty periods apply to the products noted below and are the only variations to the above standard Limited Warranty:

Two (2) years from date of installation applies to model# 5000PVSPBU Battery Backup Sump Pump

Three (3) years from date of installation applies to model(s)# 17035R020PC1, 17052R020PC1, 17070R020PC1, 17040C035PC2, 17062C035PC2, 17078C035PC2 Booster Pumps; 5020PUUP, 5025PTSP, 5025PVSP, 5033PVSP, 5033PVPD Sump Pumps;5033CUEF, 5033CTEF25, 5050CUEF, 5050CTEF, 5050CTEF25, 5050CVSJ, 5050CTSJ25, 5050CTSJ, 5050CVEF, 5050CUSJ, 5050CUEF25, 5050CUSJ15, 5050CTSJ15, 5050CVSJ15, 5040CUEFH25, 5040CTEFH25, 5050CUEFH25, 5050CTEFH25 Effluent/Sewage Pumps; and 5050CTSJPAC, 5050CTSJPACSL, 5025PTSPCWB, 5050CTSSJPAC24, 5050CTSJPACSDA Package Systems.

Three (3) years from date of manufacture applies to A.Y. McDonald 4" 2HP - 10HP Submersible motors, including assembled submersible pumps up to 80 gallon per minute pump ends.

Five (5) years from date of installation applies to model(s)# 5030CVSP, 5030CUSP, 5030CUSP25, 5030CTSP, 5033CVSP, 5033CUSP, 5033CUSP25, 5050CVSP, 5050CUSP25, 5033CVSPEZ, 5050CVPD Sump Pumps; 5030CVSPK, 5030CVSPCSK Package Systems; 5030CVSPBUSS, 5033CVSPBUSS Side x Side Sumps; 16002-V3MPX, 16005-V3MPX Potable Water Pressure Tanks; and 16002-V3M, 16005-V3M, 16007-V3M, 16014-H4M, 16020MV4F, 16020-H4M, 16032MV4F, 16036MV4F, 16052MV5F, 16086MV5F, 16096MV5F, 16119MV5F Well Tanks.

Five (5) years from date of manufacture applies to A.Y. McDonald 4" 1/2HP -1-1/2HP Submersible motors, including assembled submersible pumps up to 25 gallon per minute pump ends.

We've been helping customers since 1953

Trust Guard Security Scanned