Prev Next
  • Zoeller 4404-0016 Model J4404 High Capacity Sewage Dewatering Double Seal Pump 2.0 HP 200V 3PH 50' Cord Nonautomatic - ZLR4404-0016
  • Zoeller 4404-0016 Model J4404 High Capacity Sewage Dewatering Double Seal Pump 2.0 HP 200V 3PH 50' Cord Nonautomatic - ZLR4404-0016

Zoeller 4404-0016 Model J4404 High Capacity Sewage Dewatering Double Seal Pump 2.0 HP 200V 3PH 50' Cord Nonautomatic

Price: $2,920.00
Quantity:
+ -
Usually ships within 3 weeks
SKU: ZLR4404-0016


Shipping Weight:
159.0 LBS
Shipping Dimensions
Length: 12 In
Width: 16 In
Height: 27 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

zoeller-logo.jpg

Zoeller J4404 Series Sewage & Dewatering Pump Description

The "Waste-Mate" series of submersible pumps is designed for use in residential or commercial dewatering and wastewater applications and can be used to transfer large volumes of water from parking lots, flooded areas and unscreened raw sewage. The innovative vortex impeller design reduces the risk of clogging and allows each pump to pass 3" (76 mm) spherical solids. Constructed of non-corrodible hardware, these durable cast iron pumps include a powder coated epoxy finish to prevent corrosion. Every pump is designed to provide heat dissipation from the motor for longer life and lower life cycle cost. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance!

Zoeller J4404 Series Sewage & Dewatering Pump Features and Benefits

  • Cast Iron Casting, Class 25-30 25000# Tensile Strength
  • Oil Filled, Hermetically Sealed, Automatic Reset Thermal Overload Protected (1 Ph only) Motor
  • Mechanical Shaft Seal - Carbon and Ceramic Rotary Face Seal, with Stainless Steel Wetted Parts
  • Stainless Steel Screws, Bolts, Washers and Lifting Bracket
  • Maximum Temperature: 130°F (54°C) Standard
  • 4” horizontal Flanged Discharge, Standard ANSI Flange
  • Corrosion-Resistant, Powder-Coated Epoxy Finish
  • Optional Intermediate Stabilizer for Systems over 15' (5 m) Deep (P/N 39-0013 carbon steel, P/N 39-0014 stainless steel)

Zoeller Model J4404 Sewage & Dewatering Pump Specifications

  • VOLTAGE: 3ø, 200V, 60Hz
  • HORSEPOWER: 2.0 HP
  • AMPS: 13.8
  • MOTOR TYPE: 3 Phase
  • RPM: 1725 RPM
  • MAX HEAD: 33'
  • MAX FLOW RATE: 300 GPM
  • DISCHARGE SIZE: 4" Horizontal ANSI Flange
  • SOLIDS HANDLING: 3" Spherical Solid
  • IMPELLER TYPE: Cast Iron, Non-Clogging Vortex
  • CORD LENGTH: 50'
  • CORD TYPE: 1 Ph: UL Listed 3-Wire Neoprene Cord and Plug. 3 Ph: 4-wire with No Plug.
  • BODY CONSTRUCTION: Cast Iron
  • MAXIMUM OPERATING TEMPERATURE: 130°F (54C)

Zoeller Model J4404 Performance Curve

400-series-performance-curve1.jpg


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Zoeller Limited Warranty

Manufacturer warrants, to the purchaser and subsequent owner during the warranty period, every new product to be free from defects in material and workmanship under normal use and service, when properly used and maintained, for a period of one year from date of purchase by the end user, or 18 months from date of original manufacture of the product, whichever comes first. Parts that fail within the warranty period, one year from date of purchase by the end user, or 18 months from the date of original manufacture of the product, whichever comes first, that inspections determine to be defective in material or workmanship, will be repaired, replaced or remanufactured at Manufacturer's option, provided however, that by so doing we will not be obligated to replace an entire assembly, the entire mechanism or the complete unit. No allowance will be made for shipping charges, damages, labor or other charges that may occur due to product failure, repair or replacement.

This warranty does not apply to and there shall be no warranty for any material or product that has been disassembled without prior approval of Manufacturer, subjected to misuse, misapplication, neglect, alteration, accident or act of God; that has not been installed, operated or maintained in accordance with Manufacturer's installation instructions; that has been exposed to outside substances including but not limited to the following: sand, gravel, cement, mud, tar, hydrocarbons, hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive substances, wash towels or feminine sanitary products, etc. in all pumping applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or other person to assume for us any other liability in connection with our products.

Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211, Attention: Customer Service Department to obtain any needed repair or replacement of part(s) or additional information pertaining to our warranty.

MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THE EXPRESSED WARRANTY.

Some states do not allow limitations on the duration of an implied warranty, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

We've been helping customers since 1953

Trust Guard Security Scanned