Zoeller G404 Series Sewage & Dewatering Pump Description
The "Waste-Mate" series of submersible pumps is designed for use in
residential or commercial dewatering and wastewater applications and can be
used to transfer large volumes of water from parking lots, flooded areas and
unscreened raw sewage. The innovative vortex impeller design reduces the risk
of clogging and allows each pump to pass 3" (76 mm) spherical solids.
Constructed of non-corrodible hardware, these durable cast iron pumps include
a powder coated epoxy finish to prevent corrosion. Every pump is designed to
provide heat dissipation from the motor for longer life and lower life cycle cost.
As with every Zoeller pump, each one is 100% pressure-tested, submerged and
run to ensure quality and reliability for years of trouble-free performance!
Zoeller G404 Series Sewage & Dewatering Pump Features and Benefits
-
Cast Iron Casting, Class 25-30 25000# Tensile Strength
-
Mechanical Shaft Seal - Carbon and Ceramic Rotary Face Seal, with
Stainless Steel Wetted Parts
-
Stainless Steel Screws, Bolts, Washers and Lifting Bracket
-
Maximum Temperature: 130°F (54°C) Standard
-
4” Horizontal Flanged Discharge, Standard ANSI Flange
-
Corrosion-Resistant, Powder-Coated Epoxy Finish
-
Optional Intermediate Stabilizer for Systems over 15' (5 m) Deep (P/N
39-0013 carbon steel, P/N 39-0014 stainless steel)
Zoeller Model G404 Sewage & Dewatering Pump Specifications
- VOLTAGE: 3ø, 460V, 60Hz
- HORSEPOWER: 2.0 HP
- AMPS: 5.2
- MOTOR TYPE: 3 Phase
- RPM: 1725 RPM
- MAX HEAD: 33'
- MAX FLOW RATE: 300 GPM
- DISCHARGE SIZE: 4" Horizontal ANSI Flange
- SOLIDS HANDLING: 3" Spherical Solid
- IMPELLER TYPE: Cast Iron, Non-Clogging Vortex
- CORD LENGTH: 50'
- CORD TYPE: 1 Ph: UL Listed 3-Wire Neoprene Cord and Plug. 3 Ph: 4-wire with No Plug.
- BODY CONSTRUCTION: Cast Iron
- MAXIMUM OPERATING TEMPERATURE: 130°F (54C)
Zoeller Model G404 Performance Curve
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov