Prev Next

SJE-Rhombus EZconnex® 3-Port Float Switch Connection System 50' Cord w/ Mounting Bracket

Price: $210.27
Quantity:
+ -
Usually ships within 4 days
SKU: SJE1047613


Shipping Weight:
6.0 LBS
Shipping Dimensions
Length: 6 In
Width: 6 In
Height: 6 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

sjerhombuslogo6002018.jpg

SJE-Rhombus EZconnex® 3-Port Float Switch Connection System

Designed for Easy Installation of Float Switches in Wet Well Applications

The EZconnex® 3-port Float Switch Connection System includes an electrical wiring manifold with mounting bracket and hardware. The manifold features three quick release float switch connection ports. A single 6 conductor direct burial cable has Red-Blue-Yellow wire pairs that match the R-B-Y imprint on the manifold housing for easy field wiring. The system is rated for short term water submersion. The mounting bracket is designed to allow quick access to the manifold and float switches for easy maintenance.

EZconnex® 3-port float switches feature an internal switching mechanism with sealed gold cross-point contacts for reliable low current operation. A range of wide-angle or narrow-angle float switches feature a quick release connection that simply plugs into the manifold port(s) for easy installation. The EZconnex® 3-port system can be used with 1, 2, or 3 float switches. Each float switch includes a protective rubber boot that provides a dual seal design for an extra layer of protection to keep connections clean and dry. Sealing plugs are available for unused manifold port(s).
NOTE: Do not install with open port(s).

SJE-Rhombus EZconnex® 3-Port Float Switch Connection System Features

  • 3 Quick Release Float Connection Ports.
  • A Single 6 Conductor Direct Burial Cable with Shield.
  • Housing is Imprinted with R-B-Y that Matches Red-Blue-Yellow Cable Wire Pairs for Easy Float Identification.
  • Rated for Short Term Water Submersion.
  • Includes Mounting Bracket with Hardware.
  • Designed for use with EZconnex™ Float Switches (not included with manifold; float switches must be ordered separately):
    • Low Current Applications Down to 0.160 mA at 125V.
    • Mechanically-Activated, Snap Action Contacts.
    • Quick Release Float Connection Simply Plugs into Manifold Port(s).
    • Colored Caps for Easy Identification of Normally Open (blue cap) or Normally Closed (red cap) Models.
    • Activation Angle Above/Below Horizontal: 4"(10.16 cm) Wide-Angle; 1.5" (3.81 cm) Narrow-Angle
    • Each Float Switch Includes a Protective Rubber Boot that Provides a Dual Seal Design for a Extra Layer of Protection to Keep Connection to Keep Connections Clean and Dry.
  • MANIFOLD OPTIONS:
    • Standard Cable Lengths of 25, 50 or 100 ft (7.62, 15.24, or 30.48 m).
    • Sealing Plug (includes rubber boot) Required for Unused Port(s).
  • FLOAT SWITCH OPTIONS:
    • Standard Cable Lengths of 5,10 or 20 ft (1.52, 3.05, or 6.10 m).
    • Blue Cap for Normally Open (High Level) Applications or Red Cap for Normally Closed (low level) Applications.
    • With Narrow or Wide-Angle Pumping Ranges.
    • Two Float Mounting Configurations Available:
      • Mounting Clamp: for Applications where the Switch can be Attached to a Float Tree or Similar Mounting Device.
      • Cable Weight: Includes Clip-On Cable Weight; Floats Should be Hung From a Hanger Bracket (ordered separately)

    NOTE: Do Not Suspend Floats Directly from Manifold.

  • CSA Certified
  • Five-Year Limited Warranty

SJE-Rhombus EZconnex® 3-Port Float Switch Connection System Specifications

  • MANIFOLD SPECIFICATIONS:
    • CABLE: Direct Burial Shielded PVC Type TC-ER TFFN (UL) 600V 18 Gauge, 6 Conductor
    • HOUSING: ABS Plastic
    • ELECTRICAL: 125 VAC Maximum Electrical Overload: 1 Amp per Connection Port.
  • FLOAT SPECIFICATIONS:
    • CABLE: Flexible 18 Gauge, 2 Conductor (UL, CSA) SJOW, Water-Resistant (CPE)
    • FLOAT: 2.74" Diameter x 4.83" Long (7.0 cm x 12.3 cm), High-Impact, Corrosion Resistant, Polypropylene Housing for Use in Sewage and Water Up to 140° F (60° C)
    • MAXIMUM WATER DEPTH: 30 Feet (9 meters), 13 PSI (90kPa)
    • ELECTRICAL: 125 VAC
      • Maximum Electrical Load: 1 Amp
      • Minimum Electrical Load: 0.160 Milliamps
    • ELECTRICAL: 30 VDC
      • Maximum Electrical Load: 1 Amp
      • Minimum Electrical Load: 0.160 Milliamps
    • ELECTRICAL: 5 VDC
      • Minimum Electrical Load: 1 Milliamps

WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

SJE Rhombus Limited Warranty Policy

Five-Year Limited Warranty Policy We Stand Behind Our Products!

Effective for products manufactured after January 1, 2014

SJE-Rhombus warrants to the original consumer that this product shall be free of manufacturing defects for five years* after the date of consumer purchase. During that time period and subject to the conditions set forth below, SJE-Rhombus will repair or replace, for the original consumer, any component which proves to be defective due to defective materials or workmanship of SJE-Rhombus.

THE FIVE-YEAR LIMITED WARRANTY DOES NOT APPLY TO THE MOTOR START KIT COMPONENTS. SJE-RHOMBUS WILL WARRANTY MOTOR START KIT COMPONENTS, SUPPLIED BY SJE-RHOMBUS FOR ONE YEAR. SJE-RHOMBUS MAKES NO WARRANTIES OF ANY TYPE WITH RESPECT TO MOTOR START KITS SUPPLIED BY A CUSTOMER.

SJE-Rhombus warrants to the original consumer that this product shall be free of manufacturing defects for five years* after the date of consumer purchase. During that time period and subject to the conditions set forth below, SJE-Rhombus will repair or replace, for the original consumer, any component which proves to be defective due to defective materials or workmanship of SJE-Rhombus.

THE FIVE-YEAR LIMITED WARRANTY DOES NOT APPLY TO THE MOTOR START KIT COMPONENTS. SJE-RHOMBUS WILL WARRANTY MOTOR START KIT COMPONENTS, SUPPLIED BY SJE-RHOMBUS FOR ONE YEAR. SJE-RHOMBUS MAKES NO WARRANTIES OF ANY TYPE WITH RESPECT TO MOTOR START KITS SUPPLIED BY A CUSTOMER.

ELECTRICAL WIRING AND SERVICING OF THIS PRODUCT MUST BE PERFORMED BY A LICENSED ELECTRICIAN.

This warranty does not apply to: (a) damage due to lightning or conditions beyond the control of SJE-Rhombus; (b) defects or malfunctions resulting from units not installed, operated, or maintained in accordance with instructions provided, applicable local codes, ordinances, or accepted trade practices; (c) failures resulting from abuse, misuse, accident, or negligence; or (d) units repaired and/or modified without prior authorization from SJE-Rhombus.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

TO OBTAIN WARRANTY SERVICE: The consumer shall assume all responsibility and expense for removal, reinstallation, and freight. Any item to be repaired or replaced under this warranty must be returned to SJE-Rhombus, or such place as designated by SJE-Rhombus. Contact customer service at 1-888-DIAL-SJE (1-888-342-5753) for a Return Materials Authorization number (RMA) on any product being returned for a warranty claim.

ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS ARE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. SJE-RHOMBUS SHALL NOT, IN ANY MATTER, BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES AS A RESULT OF A BREACH OF THIS WRITTEN WARRANTY OR ANY IMPLIED WARRANTY.

*Build-A-Panel™ Plus Control Panels and Engineered Custom panels carry a two-year limited warranty (or as quoted). The pressure transducer included with VARIOspeed® products carries a one-year limited warranty.

We've been helping customers since 1953

Trust Guard Security Scanned