Prev Next

Zoeller 842-0014 Model FX842 "Shark" High Head Grinder Pump Explosion Proof 2.0 HP 230V 3PH 20' Cord Nonautomatic

Price: Discontinued
+ -
Discontinued or no longer available.
SKU: ZLR842-0014


Shipping Weight:
163.0 LBS
Shipping Dimensions
Length: 15 In
Width: 12 In
Height: 32 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

zoeller-logo.jpg

Discontinued

Zoeller Model FX842 Grinder Explosion Proof Pump Description

"The Shark". This series of submersible grinder pumps is designed for use in residential or commercial wastewater applications in Class I, Division 1, Groups C and D environments. Each pump is FM/CSA approved and features innovative motor and electrical enclosures that are designed to reduce the risk of vapor ignition both inside and outside the pump. Should vapors inside the electrical enclosures become ignited, the enclosures are engineered to contain the event and prevent escalation. Each pump is constructed of hardware that will allow it to operate safely and efficiently in extreme conditions.

Zoeller Model FX842 Grinder Explosion Proof Pump Features and Benefits

  • Finned Class 30 Cast Iron Construction.
  • Corrosion-Resistant, Powder Coated Epoxy Finish.
  • Oil-Filled, Hermetically Sealed Motor with Class F Insulation.
  • Hardened Stainless Steel Cutter and Disc Rockwell C55-60.
  • Stainless Steel Screws, Bolts and Lifting Bail.
  • Dual Mechanical Seals with Leak Detection.
  • Automatic Thermal Overload Protection.
  • Legs Provide for Free Standing Installation.
  • Preassembled Systems Available.
  • Threaded Conduit Connection on Pump Cap to Provide Protection to Power Cord and Sensor Wires
  • 1-1/4" NPT Vertical Discharge
  • Requires Circuit in Control Panel to Function. Reversible Feature only Available on X840 Models.

Zoeller Model FX842 Grinder Explosion Proof Pump Specifications

  • VOLTAGE: 3ø, 230V, 60Hz
  • HORSEPOWER: 2.0 HP
  • AMPS: 10.8
  • MOTOR TYPE: 3 Phase
  • RPM: 3450 RPM
  • MAX HEAD: 125'
  • MAX FLOW RATE: 35 GPM
  • DISCHARGE SIZE: 1¼" NPT Vertical
  • IMPELLER TYPE: Ductile Iron, Non-Clogging Vortex
  • CORD LENGTH: 20'
  • CORD TYPE: UL listed, SOOW
  • BODY CONSTRUCTION: Cast Iron
  • MAXIMUM OPERATING TEMPERATURE: 104°F (40C)

Zoeller Model FX842 Performance Curve

x840-x841-x842-performance-curve.jpg


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Zoeller Limited Warranty

Manufacturer warrants, to the purchaser and subsequent owner during the warranty period, every new product to be free from defects in material and workmanship under normal use and service, when properly used and maintained, for a period of one year from date of purchase by the end user, or 18 months from date of original manufacture of the product, whichever comes first. Parts that fail within the warranty period, one year from date of purchase by the end user, or 18 months from the date of original manufacture of the product, whichever comes first, that inspections determine to be defective in material or workmanship, will be repaired, replaced or remanufactured at Manufacturer's option, provided however, that by so doing we will not be obligated to replace an entire assembly, the entire mechanism or the complete unit. No allowance will be made for shipping charges, damages, labor or other charges that may occur due to product failure, repair or replacement.

This warranty does not apply to and there shall be no warranty for any material or product that has been disassembled without prior approval of Manufacturer, subjected to misuse, misapplication, neglect, alteration, accident or act of God; that has not been installed, operated or maintained in accordance with Manufacturer's installation instructions; that has been exposed to outside substances including but not limited to the following: sand, gravel, cement, mud, tar, hydrocarbons, hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive substances, wash towels or feminine sanitary products, etc. in all pumping applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or other person to assume for us any other liability in connection with our products.

Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211, Attention: Customer Service Department to obtain any needed repair or replacement of part(s) or additional information pertaining to our warranty.

MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THE EXPRESSED WARRANTY.

Some states do not allow limitations on the duration of an implied warranty, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

We've been helping customers since 1953

Trust Guard Security Scanned