Prev Next

Myers MESPD50MH4 Cast Iron Effluent Pump 0.5 HP 460V 3PH Manual 20' Cord Seal Failure

Price: $1,634.85
Quantity:
+ -
Usually ships within 2 weeks
SKU: MYR28215D022


Shipping Weight:
75.0 LBS
Shipping Dimensions
Length: 14 In
Width: 12 In
Height: 18 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

myerslogopumps1.png

Myers MESPD50 Series Cast Iron Effluent Pump Description

Myers MESPD50/100H Series can handle capacities up to 110 gallons per minute and heads up to 50 feet, while the MESPD100 handles capacities up to 140 gallons per minute and heads to 63 feet. These pumps feature a high-quality cast iron pump volute, motor housing and seal housing construction that help to ensure a long service life.

The MESPD50/100H are completely submersible, "high-head", dual-seal pumps for use in septic tank effluent applications.

Myers MESPD50 Series Cast Iron Effluent Pump Typical Application

  • Septic Tank Effluent
  • High-Head Dewatering
  • High-Capacity Sump

Myers MESPD50 Series Cast Iron Effluent Pump Features

  • Water-Resistant Power Cord has a Compression-Fit Connection and an Epoxy Potting for Double Protection Against Water Entry. Lengths of 10 and 20 Feet are Available with Molded Plugs.
  • Oil-Filled Motor Provides Superior Cooling and Permanent Lubrication of Bearings, Minimizing Maintenance and Extending Service Life.
  • 1/2 or 1 HP Capacitor-Start Motors Provide Maximum Starting Torque. Motor Windings Contain Automatic Thermal Overload Protection (1ø).
  • High-Quality Cast Iron Construction of Pump Volute, Motor Housing and Seal Housing Provides Long Life.
  • Upper Bearings are Heavy-Duty, Single-Row Ball Bearings that are Permanently Lubricated for Service-Free Life.
  • Discharge is a Standard 2" NPT (3" is optional).
  • A Seal Failure Sensor Probe (for connection to a seal failure alarm) is Standard on Three-Phase Units and Available as an Option on Single-Phase Models.
  • Two Carbon- and Ceramic-Faced Mechanical Shaft Seals are Mounted in Tandem to Provide Double Protection Against Water Entry for a Long, Leakproof Life.
  • The Solids Handling, Two-Vane, Cast Iron Impeller, which is Threaded to a Stainless Steel Shaft, Efficiently Handles up to 3/4 inch Spherical Solids-Providing Long Life in Demanding Applications.
  • Bottom Inlet has no Screen to Become Clogged, Providing Optimum Pump Performance and Minimal Maintenance.
  • Does Not Include "Piggyback" Diaphragm Switch

Myers MESPD50MH4 Cast Iron Effluent Pump Specifications

  • VOLTAGE: 3ø, 460V, 60 Hz
  • HORSEPOWER: 0.5 HP
  • AMP DRAW (full load): 1.8
  • MOTOR TYPE: Split Phase Motor
  • RPM: 3450
  • MAXIMUM HEAD: 50'
  • MAXIMUM CAPACITY: 110 GPM
  • SWITCH TYPE: Manual
  • DISCHARGE PIPE SIZE: 2.0" NPT
  • MAXIMUM SOLIDS HANDLING SIZE: 3/4"
  • IMPELLER TYPE: Cast Iron, Two-Vane Nonclog
  • CORD LENGTH: 20'
  • CORD SIZE: 18/5, SJTW-A
  • BODY CONSTRUCTION: Cast Iron
  • MAXIMUM LIQUID TEMPERATURE: 140°F

Myers MESPD50 Series Cast Iron Effluent Pump Performance Curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

pentair-hydromatic-level-4.png

HYDROMATIC warrants to the original consumer purchaser (“Purchaser” or “You”) of HYDROMATIC Sump Pumps, Effluent Pumps, Sewage Pumps (other than 2-1/2"), and Package Systems, that they will be free from defects in material and workmanship for the Warranty Period of 36 months from date of manufacture.

Our warranty will not apply to any product that, in our sole judgement, has been subject to negligence, misapplication, improper installation, or improper maintenance. Without limiting the foregoing, operating a three phase motor with single phase power through a phase converter will void the warranty. Note also that three phase motors must be protected by three-leg, ambient compensated, extra-quick trip overload relays of the recommended size or the warranty is void.

Your only remedy, and HYDROMATIC’s only duty, is that HYDROMATIC repair or replace defective products (at HYDROMATIC’s choice). You must pay all labor and shipping charges associated with this warranty and must request warranty service through the installing dealer as soon as a problem is discovered. No request for service will be accepted if received after the Warranty Period has expired. This warranty is not transferable.

EXCEPTIONS:

Exceptions are warranted for a period of 12 months from date of purchase or 18 months from date of manufacture, whichever comes first.

Hydromatic Special Application Pumps:

  • HCU15/HCU15S/HCU20S
  • HUP
  • P33A1
  • HY106
  • HPUSP125

Battery Back-Up Sump Pumps:

  • A+ Battery Back-up
  • FG-A1
  • FG-100A
  • FG-200A

Filtered Effluent Pumps:

  • HE Series

Grinder Pumps:

  • HPGR Series

2-1/2" Sewage Pumps:

  • S3S Series
  • S4S Series
  • SB3S Series
  • SB4S Series
All accessories and repair parts

HYDROMATIC SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE FOREGOING WARRANTIES SHALL NOT EXTEND BEYOND THE DURATION EXPRESSLY PROVIDED HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on the duration of an implied warranty, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal rights and You may also have other rights which vary from state to state.

This warranty supersedes and replaces all previous warranty publications.

HYDROMATIC

740 East 9th Street, Ashland, OH 44805

Phone: 888-957-8677 • Fax: 888-840-7867 • Web Site: http://www.hydromatic.com

We've been helping customers since 1953

Trust Guard Security Scanned