HYMAX GRIP 14" and 16" is the first restraint product of its size with four top-facing bolts, and a stab-fit, one-piece design.
Compared to similar products with multiple parts and as many as 12 bolts to tighten, the HYMAX Grip 14/16" makes repairs safer and faster with less time spent in the ditch.
The four top-facing bolts eliminate under digging for space to tighten bolts. The stab-fit, one-piece design allows for easier and faster installation and eliminates the possibility of losing nuts in the mud.
- The Wide-Range HYMAX GRIP 14"/16" Restrains most Mental and Plastic Pipes, Including HDPE and Replaces the Need to use Dedicated Products to Reduce Inventory Costs and Save Shelf Space.
- PRECAUTIONS FOR HDPE PIPE: Note that the Use of Pipe Stiffeners is Required on HDPE Pipe.
- The Patented GRIP Chain Offers Circular Restraint Around the Pipe. It Holds Pipes Tightly in Place During Installation, Allowing Full Control over the Gap Between Pipes
As the Pipe Applies Axial Pressure, the GRIP Chain Increasingly Tightens over the Pipe, Preventing Pullout.
- The HYMAX GRIP Allows Dynamic Deflection of the Pipe for up to Four Degrees Per Side, Reducing Future Pipe Cracks and Breaks.
Hymax Grip Large Diameter Coupling Features
- The First Restraint Product of its Size with Only Four Top-Facing Bolts and a Stab-Fit, One Piece Design for Faster and Safer Installation
- Exerts Gripping Power Equal to 70 Tons on Connecting Pipes
- Restrains Both Plastic and Metal Pipes, Including HDPE, and Replaces the Need to use Dedicated Products
- Patented Grip Chain Offers Circular Restraint Around the Pipe
- Patented Radial Closing Mechanism Holds Pipes Tightly in Place During Installation
- Allows Dynamic Deflection of the Pipe for up to 4° Per Side, Reducing Future Pipe Cracks and Breaks
Hymax Grip Large Diameter Coupling Specifications
- Meets or Exceeds Standards AWWA C-219, NSF 61, NSF 372
- SIZE: 14" Nominal Diameter Pipe Size
- PIPE O.D. RANGE: 15.12 - 15.75
- WORKING PRESSURE: 250 PSI
- RATED PRESSURE: 500 PSI
- TORQUE: 350 FT-LBS
- MATERIALS:
- END RINGS: Ductile Iron Casting ASTM A536 Grade 65-45-12
- CENTER RING: Ductile Cast Iron Casting ASTM A536 Grade 65-45-12.
- GASKETS: EPDM Compounded for Water and Sewage. Meets International Standards for Contact with Drinking Water
- GRIP CHAIN: Gripping Teeth: AISI 440 C Sizes 4”-12” AISI 420 2B or AISI 440C
- BRIDGE: AISI 304 Stainless Steel
- SPHERICAL SPACERS: AISI 304 Stainless Steel
- COATING: 100% Fusion Bonded Epoxy for Enhanced Corrosion Protection. Nominal Thickness 14 MIL.
- NUTS,BOLTS AND WASHERS: AISI 304 Stainless Steel. Rolled Thread and Anti-Galling Coating
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Limited Warranty
Krausz warrants to Buyer that the products supplied to Buyer shall be free from
defects in materials and workmanship, and shall substantially comply with the technical specifications
for such product available on Krausz's website at www.krauszusa.com, as such specifications may be
amended by Krausz from time to time (the “Specifications”). Such warranty shall remain in force for a
period of one (1) Year from the actual date of delivery (the "Warranty Period"). If a product delivered by
Krausz to Buyer is found defective in design, materials or workmanship, or is substantially incompliant
with the applicable Specifications, Buyer’s sole remedy shall be to return the defective product to Krausz
and receive a repaired or replacement product (fixed, equivalent or new) in return or a credit in respect
of the defective product, at the sole discretion of Krausz. Krausz will not be liable for labor costs for
fitting and/or removal and/or re-install any products and/or transportation costs and/or loss of profit
and/or any other related expenses, by the Buyer or any other party in respect of any warranty claim.
Buyer shall be responsible for and shall perform all labor required in connection with this warranty
described herein (excluding labor associated with the repair or replacement of products at Krausz’s
facilities), including labor required to inspect the products on Buyer’s premises and to ship products to
Krausz. Buyer shall be responsible for and pay all freight, insurance, import/export and other shippingrelated
charges to Krausz for all warranty repairs. Products returned to Krausz by Buyer must be shipped
D.D.U. (Incoterms 2010) Krausz’s facility or such other location as Krausz may designate. Krausz shall be
responsible for and pay all freight, insurance, import/export and other shipping-related charges to
return repaired products to Buyer, provided that if Krausz determines that any product returned for
warranty repair is not defective, Buyer shall pay such charges. Before returning any product to Krausz,
Buyer must obtain from Krausz a return material authorization number. If a defective product cannot be
fixed and renewed, as determined by Krausz in its sole judgment based on appropriate evidence
received from Buyer to Krausz’s satisfaction, Krausz may, in its sole discretion, waive the return of the
defective product.
The foregoing warranties are conditioned on satisfaction of each of the following: (i) all claims regarding
defective products must be made in writing to Krausz (with appropriate documented evidence of the
defect as Krausz reasonably requests) during the Warranty Period and shall stipulate the type of defect
and the circumstances in which it was caused; (ii) Buyer has complied with the provisions of Section 1
above;, (iii) Buyer has received Krausz’s prior written authorization to the return of the defective
product, unless such return was waived by Krausz, in accordance with the preceding paragraph; (iv) the
defective product was installed in accordance with the installation instructions and use restrictions or
warnings for such product, as published on Krausz' website at www.krauszusa.com or the User Manual;
(v) the products were utilized solely for their intended purpose and were maintained and used strictly in
accordance with the User Manual; (vi) the products are installed in a ground were such ground’s
conditions and composition cannot damage the products; (vii) the defect was not caused by the use of
the warranted products beyond the recommended limits published by Krausz or resulting from
improper storage, transportation, handling, installation, operating or environmental conditions, wear,
deterioration or any other misapplication, alteration, abuse, misuse or accident;, and (viii) the defect
was not caused due to reasons beyond Krausz’s control. To the extent Krausz provides technical
information, advice or service concerning Krausz products, whether with or without charge, such
technical assistance shall be advisory only, and Krausz shall have no liability for any adverse
consequences resulting from any such technical assistance.