{"title":"Remote Monitoring","description":"","products":[{"product_id":"littelfuse-rm1000-remote-monitor","title":"Littelfuse RM1000 Remote Monitor","description":"\u003cp\u003e\n\u003cimg data-image=\"7o844fqdks2q\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/littelfuse1_logo.jpg\" title=\"Littelfuse your electronic and control \u0026amp; protection specialists\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003eLittelfuse RM1000 Remote Monitor Description\u003c\/h3\u003e\n\u003cp\u003e\n\tThe RM1000 is a motor monitoring device to be used in conjunction with 777 family of products (excluding the P1 Series) 77C family of products and the 601 voltage monitors, via Modbus protocol with a communications module. The RM1000\/777\n    motor management system combines unsurpassed electronic motor protection and critical, user-friendly motor monitoring.\u003c\/p\u003e\n\u003cp\u003e\n\tThe RM1000 Series can monitor up to 16 relays through an RS-485 network using Modbus RTU protocol. A second communication port allows monitoring and control of up to 99 relays from a computer, PLC, DCS or SCADA system and can be accessed from the host computer or PLC with RM1000 acting as a repeater for any of its motor protectors. In addition to the monitoring functions, the RM1000 can be used to reset a tripped relay.\n\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\nLittelfuse RM1000 Remote Monitor Features\u003c\/h3\u003e\n\u003ch6\u003eDisplays:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e Individual Line Currents and Average Current\u003c\/li\u003e\n\u003cli\u003e Current and Voltage Unbalance\u003c\/li\u003e\n\u003cli\u003eIndividual Phase Voltages and Average Voltage\u003c\/li\u003e\n\u003cli\u003eDisplays Last Four Faults, Trip Reason, and Restart Timer Status\u003c\/li\u003e\n\u003cli\u003e MotorSaver® and\/or PumpSaver® Setpoints\u003c\/li\u003e\n\u003cli\u003eRun-Hours on Each Motor\u003c\/li\u003e\n\u003cli\u003eWarning of Pending (imminent) Faults\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eControls:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eReset Run-Hour Meter\u003c\/li\u003e\n\u003cli\u003eReset MotorSaver® or PumpSaver®\u003c\/li\u003e\n\u003cli\u003eChange Setpoints From the RM1000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eConvenience:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003ePower from RS485MS-2W Communications Module\u003c\/li\u003e\n\u003cli\u003eMonitor up to 16 777s With One Display\u003c\/li\u003e\n\u003cli\u003eNEMA 3R Outdoor Rated\u003c\/li\u003e\n\u003cli\u003eSecondary Steel Enclosure Available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Littelfuse\/Symcom","offers":[{"title":"Default Title","offer_id":49325016121661,"sku":"MSRRM1000","price":515.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/msrrm100021_001_wbg.jpg?v=1725419352"},{"product_id":"littelfuse-rm1000-nema-4-remote-monitor","title":"Littelfuse RM1000 NEMA 4 Remote Monitor","description":"\u003cp\u003e\n\u003cimg data-image=\"7o844fqdks2q\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/littelfuse1_logo.jpg\" title=\"Littelfuse your electronic and control \u0026amp; protection specialists\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003eLittelfuse RM1000-NEMA4 Remote Monitor Description\u003c\/h3\u003e\n\u003cp\u003e\n\tThe RM1000 is a motor monitoring device to be used in conjunction with 777 family of products (excluding the P1 Series) 77C family of products and the 601 voltage monitors, via Modbus protocol with a communications module. The RM1000\/777\n    motor management system combines unsurpassed electronic motor protection and critical, user-friendly motor monitoring.\u003c\/p\u003e\n\u003cp\u003e\n\tThe RM1000 Series can monitor up to 16 relays through an RS-485 network using Modbus RTU protocol. A second communication port allows monitoring and control of up to 99 relays from a computer, PLC, DCS or SCADA system and can be accessed from the host computer or PLC with RM1000 acting as a repeater for any of its motor protectors. In addition to the monitoring functions, the RM1000 can be used to reset a tripped relay.\n\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\nLittelfuse RM1000-NEMA4 Remote Monitor Features\u003c\/h3\u003e\n\u003ch6\u003eDisplays:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e Individual Line Currents and Average Current\u003c\/li\u003e\n\u003cli\u003e Current and Voltage Unbalance\u003c\/li\u003e\n\u003cli\u003eIndividual Phase Voltages and Average Voltage\u003c\/li\u003e\n\u003cli\u003eDisplays Last Four Faults, Trip Reason, and Restart Timer Status\u003c\/li\u003e\n\u003cli\u003e MotorSaver® and\/or PumpSaver® Setpoints\u003c\/li\u003e\n\u003cli\u003eRun-Hours on Each Motor\u003c\/li\u003e\n\u003cli\u003eWarning of Pending (imminent) Faults\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eControls:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eReset Run-Hour Meter\u003c\/li\u003e\n\u003cli\u003eReset MotorSaver® or PumpSaver®\u003c\/li\u003e\n\u003cli\u003eChange Setpoints From the RM1000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eConvenience:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003ePower from RS485MS-2W Communications Module\u003c\/li\u003e\n\u003cli\u003eMonitor up to 16 777s With One Display\u003c\/li\u003e\n\u003cli\u003eNEMA 3R Outdoor Rated\u003c\/li\u003e\n\u003cli\u003eSecondary Steel Enclosure Available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Littelfuse\/Symcom","offers":[{"title":"Default Title","offer_id":49325017203005,"sku":"MSRRM1000NEMA4","price":556.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/msrrm100021_001_wbg_6aeac977-18cc-4cde-8a45-c71aef3e261b.jpg?v=1725419436"},{"product_id":"littelfuse-rm1000-3r-remote-monitor","title":"Littelfuse RM1000-3R Remote Monitor","description":"\u003cp\u003e\n\u003cimg data-image=\"7o844fqdks2q\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/littelfuse1_logo.jpg\" title=\"Littelfuse your electronic and control \u0026amp; protection specialists\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003e\nLittelfuse RM1000-3R Remote Monitor Description\u003c\/h3\u003e\n\u003cp\u003e\n\tThe RM1000 is a motor monitoring device to be used in conjunction with 777 family of products (excluding the P1 Series) 77C family of products and the 601 voltage monitors, via Modbus protocol with a communications module. The RM1000\/777\n    motor management system combines unsurpassed electronic motor protection and critical, user-friendly motor monitoring.\u003c\/p\u003e\n\u003cp\u003e\n\tThe RM1000 Series can monitor up to 16 relays through an RS-485 network using Modbus RTU protocol. A second communication port allows monitoring and control of up to 99 relays from a computer, PLC, DCS or SCADA system and can be accessed from the host computer or PLC with RM1000 acting as a repeater for any of its motor protectors. In addition to the monitoring functions, the RM1000 can be used to reset a tripped relay.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\nLittelfuse RM1000-3R Remote Monitor Features\u003c\/h3\u003e\n\u003ch6\u003eDisplays:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e Individual Line Currents and Average Current\u003c\/li\u003e\n\u003cli\u003e Current and Voltage Unbalance\u003c\/li\u003e\n\u003cli\u003eIndividual Phase Voltages and Average Voltage\u003c\/li\u003e\n\u003cli\u003eDisplays Last Four Faults, Trip Reason, and Restart Timer Status\u003c\/li\u003e\n\u003cli\u003e MotorSaver® and\/or PumpSaver® Setpoints\u003c\/li\u003e\n\u003cli\u003eRun-Hours on Each Motor\u003c\/li\u003e\n\u003cli\u003eWarning of Pending (imminent) Faults\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eControls:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eReset Run-Hour Meter\u003c\/li\u003e\n\u003cli\u003eReset MotorSaver® or PumpSaver®\u003c\/li\u003e\n\u003cli\u003eChange Setpoints From the RM1000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eConvenience:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003ePower from RS485MS-2W Communications Module\u003c\/li\u003e\n\u003cli\u003eMonitor up to 16 777s With One Display\u003c\/li\u003e\n\u003cli\u003eNEMA 3R Outdoor Rated\u003c\/li\u003e\n\u003cli\u003eSecondary Steel Enclosure Available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Littelfuse\/Symcom","offers":[{"title":"Default Title","offer_id":49325017366845,"sku":"MSRRM10003R","price":515.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/msrrm100021_001_wbg_37113a10-f1d1-424a-965d-66d58b475317.jpg?v=1725419443"},{"product_id":"littelfuse-rm2000-remote-monitor","title":"Littelfuse RM2000 Remote Monitor","description":"\u003cp\u003e\n\u003cimg data-image=\"7o844fqdks2q\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/littelfuse1_logo.jpg\" title=\"Littelfuse your electronic and control \u0026amp; protection specialists\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003eLittelfuse RM2000 Remote Monitor Description\u003c\/h3\u003e\n\u003cp\u003e\n\tThe RM2000 Series is a motor-monitoring device to be used in conjunction with the 777 family of products (excluding the P1 Series), 77C family of products and the Model 601 voltage monitors, via Modbus protocol with a communications module.\nThe RM2000\/777 motor management system combines unsurpassed electronic motor protection and critical, user-friendly, motor monitoring.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe RM2000 has membrane keypad controls which allow both monitoring and control of a 777 relay through an RS-485 network using Modbus RTU protocol. A second communication port allows monitoring and control of up to 99 RM2000 devices\nfrom a PLC, DCS, or SCADA system or a PC with Solutions software installed. The RM2000 will act as a repeater for its motor protector when accessed from the host computer or\nPLC. In addition to the monitoring functions, the RM2000 can be used to reset a tripped relay.\n\u003c\/p\u003e\n\u003cp\u003eThe RM2000 is easily mounted remotely and improves safety for service and operations personnel by allowing them to control and monitor the device without opening the electrical cabinet. Using the RM2000 is a simple, cost-effective method for aiding\ncompliance with arc flash safety regulations. The enclosure and keypad assembly is water and ultraviolet light resistant.\u003c\/p\u003e\n\u003ch3\u003eLittelfuse RM2000 Remote Monitor Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplays:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eAverage Current, Individual Line Currents and Current Unbalance\u003c\/li\u003e\n\u003cli\u003eCurrent to Ground (Ground Fault Current)\u003c\/li\u003e\n\u003cli\u003e Line-to-Line Voltages, Average Voltage and Voltage Unbalance\u003c\/li\u003e\n\u003cli\u003eInstantaneous Power (Kw)\u003c\/li\u003e\n\u003cli\u003ePower Factor\u003c\/li\u003e\n\u003cli\u003e Last Four Faults\u003c\/li\u003e\n\u003cli\u003e All Parameters Programmed into 777 MotoSaver®\u003c\/li\u003e\n\u003cli\u003eRemaining Restart Delay Times\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControls:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eStart and Stop Buttons\u003c\/li\u003e\n\u003cli\u003eKey Lock Input to Prevent Setpoint Changes\u003c\/li\u003e\n\u003cli\u003eChange 777 Setpoints from Keypad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe RM20000 is also Equipped with a Real-Time Clock, which Allows Access to the Following Motor Management Information (most readings can be reset):\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eTotal Motor Run-Time\u003c\/li\u003e\n\u003cli\u003eTime and Date of Last Four Faults, along with Voltage and Current at Time of Trip\u003c\/li\u003e\n\u003cli\u003eTime and Date of Last 10 Motor Starts\u003c\/li\u003e\n\u003cli\u003eTotal Number of Motor Restarts\u003c\/li\u003e\n\u003cli\u003eMinimum Time Between any Two Starts with Time and Date\u003c\/li\u003e\n\u003cli\u003eRun-Time Since Last Start\u003c\/li\u003e\n\u003cli\u003ekWh Consumed\u003c\/li\u003e\n\u003cli\u003ekVARs Consumed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Littelfuse\/Symcom","offers":[{"title":"Default Title","offer_id":49325017432381,"sku":"MSRRM2000","price":1465.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/msrrm200021_001_wbg.jpg?v=1725419451"},{"product_id":"littelfuse-ol-reset-remote-reset-switch-kit-for-model-777","title":"Littelfuse OL-Reset Remote Reset Switch Kit for Model 777","description":"\u003cp\u003e\n\u003cimg data-image=\"7o844fqdks2q\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/littelfuse1_logo.jpg\" title=\"Littelfuse your electronic and control \u0026amp; protection specialists\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003e\nLittelfuse OL-RESET Product Description\n\u003c\/h3\u003e\n\u003cp\u003eThe OL-RESET\nallows the 777 line of motor protection and pump protection products to be manually reset without opening\nthe panel door. Simply connect the module to the 777 communication port, connect a wire to each of the\ntwo applicable pins on the OL-RESET and to a normally-open push-button switch (sold separately). Mount\nthe push-button switch in a convenient location.\u003c\/p\u003e","brand":"Littelfuse\/Symcom","offers":[{"title":"Default Title","offer_id":49325308281149,"sku":"MSROLRESET","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/mrsolreset_001_wbg.jpg?v=1725427099"},{"product_id":"littelfuse-informer-remote-diagnostic-tool-for-single-phase-pumpsavers","title":"Littelfuse Informer Remote Diagnostic Tool For Single-Phase PumpSavers","description":"\u003cp\u003e\n\u003cimg data-image=\"7o844fqdks2q\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/littelfuse1_logo.jpg\" title=\"Littelfuse your electronic and control \u0026amp; protection specialists\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003e\nLittelfuse Informer Description\n\u003c\/h3\u003e\n\u003cp\u003eThe Informer is a hand-held diagnostic tool designed for use with single-phase models equipped with infrared LED transmitters (111-Insider-P; 231-Insider-P; 232-Insider; 111P; 233P; 233P-1.5; 234-P and 235P).\n\u003c\/p\u003e\n\u003cp\u003eThe Informer uses an infrared receiver to access information sent from the relay which can be helpful for troubleshooting the system.\u003c\/p\u003e\n\u003cp\u003eEach Littelfuse single-phase model listed above is equipped with an infrared LED that transmits valuable information from the device. To retrieve this information, the Informer’s receiver must be directed toward the unit’s LED transmitter and be within 8\nfeet of the unit. The green COMM STATUS light indicates when the Informer is receiving data from the unit. If communication is lost, the Informer will display the last values it received. The Informer will automatically shut off after 2 minutes of non-use.\u003c\/p\u003e\n\u003ch3\u003eLittelfuse Informer Features\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eThe Informer Displays\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModel Number\u003c\/li\u003e\n\u003cli\u003eReal-time voltage, Current, and Power\u003c\/li\u003e\n\u003cli\u003e Drywell and Overload Trip Points\u003c\/li\u003e\n\u003cli\u003eCalibration Voltage\u003c\/li\u003e\n\u003cli\u003eLRestart Delay Setpoint and Restart Delay Time Remaining\u003c\/li\u003e\n\u003cli\u003eCT Size (if applicable)\u003c\/li\u003e\n\u003cli\u003eNumber of Pump Starts\u003c\/li\u003e\n\u003cli\u003eTotal Run-Time\u003c\/li\u003e\n\u003cli\u003eFault History for Last 20, Most Recent, Faults\u003c\/li\u003e\n\u003cli\u003eVoltage, Current, Power, and Run-Time for Each Fault at Time of\nthe Fault\u003c\/li\u003e\n\u003cli\u003eHighest and Lowest Voltage and Current since Last Calibration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Littelfuse\/Symcom","offers":[{"title":"Default Title","offer_id":49325309133117,"sku":"MSRINFORMER","price":307.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/msrinformer_001_wbg.jpg?v=1725427126"},{"product_id":"littelfuse-informer-ms-remote-diagnostic-tool-for-single-phase-pumpsavers","title":"Littelfuse Informer-MS Remote Diagnostic Tool For Three-Phase PumpSavers","description":"\u003cp\u003e\n\u003cimg data-image=\"7o844fqdks2q\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/littelfuse1_logo.jpg\" title=\"Littelfuse your electronic and control \u0026amp; protection specialists\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003e\nLittelfuse Informer Description\n\u003c\/h3\u003e\n\u003cp\u003eThe Informer is a hand-held diagnostic tool designed for use with single-phase models equipped with infrared LED transmitters (111-Insider-P; 231-Insider-P; 232-Insider; 111P; 233P; 233P-1.5; 234-P and 235P).\n\u003c\/p\u003e\n\u003cp\u003eThe Informer uses an infrared receiver to access information sent from the relay which can be helpful for troubleshooting the system.\u003c\/p\u003e\n\u003cp\u003eEach Littelfuse single-phase model listed above is equipped with an infrared LED that transmits valuable information from the device. To retrieve this information, the Informer’s receiver must be directed toward the unit’s LED transmitter and be within 8\nfeet of the unit. The green COMM STATUS light indicates when the Informer is receiving data from the unit. If communication is lost, the Informer will display the last values it received. The Informer will automatically shut off after 2 minutes of non-use.\u003c\/p\u003e\n\u003ch3\u003eLittelfuse Informer Features\u003c\/h3\u003e\n\u003cp\u003eThe Informer Displays\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModel Number\u003c\/li\u003e\n\u003cli\u003eReal-Time, Line and Load Side Voltage\u003c\/li\u003e\n\u003cli\u003eReal-Time, Line and Load Side Voltage Unbalance\u003c\/li\u003e\n\u003cli\u003eMotor Run Hours\u003c\/li\u003e\n\u003cli\u003eLast 20 Faults\u003c\/li\u003e\n\u003cli\u003eLast 32 Motor Starts\u003c\/li\u003e\n\u003cli\u003eHigh and Low Voltage Trip Points\u003c\/li\u003e\n\u003cli\u003eVoltage Unbalance Trip Point\u003c\/li\u003e\n\u003cli\u003eRestart and Trip Delay Settings\u003c\/li\u003e\n\u003cli\u003eVoltage at Last Fault\u003c\/li\u003e\n\u003cli\u003eCommunication Status LED\u003c\/li\u003e\n\u003cli\u003eAuto Shut Off\u003c\/li\u003e\n\u003cli\u003eLast Fault with Trip Conditions\u003c\/li\u003e\n\u003cli\u003eCT Size (if applicable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNon-Returnable\u003c\/b\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Littelfuse\/Symcom","offers":[{"title":"Default Title","offer_id":49325309395261,"sku":"MSRINFORMERMS","price":307.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/msrinformer_001_wbg_96ea84fa-c28b-4d08-be61-42c8c76306cb.jpg?v=1725427134"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/collections\/msrrm200021_001_wbg.jpg?v=1727896105","url":"https:\/\/rcworst.com\/collections\/remote-monitoring.oembed","provider":"R.C. Worst \u0026 Company Inc","version":"1.0","type":"link"}