{"title":"All Grinder Pumps","description":"","products":[{"product_id":"zoeller-820-0011-model-wd820-shark-single-directional-grinder-pump-2-0-hp-230v-1ph-20-cord-automatic","title":"Zoeller 820-0011 Model WD820 \"Shark\" Single Directional Grinder Pump 2.0 HP 230V 1PH 20' Cord Automatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"xp0rfrgot12p\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 820 Single Directional Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tOur Model WD820 Sewage Grinder Pump is designed to pump raw sewage in a sewage ejector application. Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology.  This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The 230 Volt, 2 HP, Model 820 utilizes a vortex impeller.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe WD820, is a fully automatic float-operated grinder pump with a wide-angle float switch hardwired directly into the pump allowing it to turn on when called upon. The Model 820 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications.  The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.\n\u003c\/p\u003e\n\u003cp\u003e\nEvery pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 820 Single Directional Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation Which Prevents the Pump From Overheating\u003c\/li\u003e\n\u003cli\u003eAutomatic Pump With a Wide-Angle Float Switch Hardwired into the Cap of the Pump that Makes for an Easy Installation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure That it Performs as Expected When You Receive it \u003c\/li\u003e\n\u003cli\u003eComes With a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49322922901821,"sku":"ZLR820-0011","price":2192.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr818xxxxa_001_wbg.jpg?v=1725379438"},{"product_id":"zoeller-840-0004-model-e840-shark-auto-reversing-grinder-pump-2-0-hp-230v-1ph-20-cord-nonautomatic","title":"Zoeller 840-0004 Model E840 \"Shark\" Auto Reversing Grinder Pump 2.0 HP 230V 1PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"ztpczve60c6c\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 840 Auto Reversing Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tThe industry’s only automatic, reversing grinder pump is designed to pump raw sewage in a sewage ejector application.  Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology.  This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The 230 Volt, 2 HP, Model 840 utilizes a vortex impeller. Every time the pump is called to run, the cutter assembly will pump a different direction as the previous rotation.  This action reduces the potential of stringy material wrapping around the cutter assembly.\n\u003c\/p\u003e\n\u003cp\u003e\nThe Shark Series® E840 should use a control panel and control switches allowing it to turn the pump on when called upon.  The Model 840 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications.  The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.\n\u003c\/p\u003e\n\u003cp\u003e\nEvery pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 840 Auto Reversing Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation Which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eNonautomatic Grinder Pump Requires the Use of a Control Panel and Control Floats for the On\/Off Operation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure That it Performs as Expected When You Receive it\u003c\/li\u003e\n\u003cli\u003eComes with a 1-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind You Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49322923393341,"sku":"ZLR840-0004","price":2951.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/840_0004_rcw_w.jpg?v=1725379449"},{"product_id":"zoeller-820-0005-model-wh820-shark-single-directional-grinder-pump-2-0-hp-200v-1ph-20-cord-automatic","title":"Zoeller 820-0005 Model WH820 \"Shark\" Single Directional Grinder Pump 2.0 HP 200V 1PH 20' Cord Automatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"tcq59z3thwix\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 820 Single Directional Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tOur Model WH820 Sewage Grinder Pump is designed to pump raw sewage in a sewage ejector application. Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology.  This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The 200 Volt, 2 HP, Model 820 utilizes a vortex impeller.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe WH820, is a fully automatic float-operated grinder pump with a wide-angle float switch hardwired directly into the pump allowing it to turn on when called upon. The Model 820 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications.  The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.\n\u003c\/p\u003e\n\u003cp\u003e\nEvery pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 820 Single Directional Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation Which Prevents the Pump From Overheating\u003c\/li\u003e\n\u003cli\u003eAutomatic Pump With a Wide-Angle Float Switch Hardwired into the Cap of the Pump that Makes for an Easy Installation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure That it Performs as Expected When You Receive it \u003c\/li\u003e\n\u003cli\u003eComes With a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49323164008765,"sku":"ZLR820-0005","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr818xxxxa_001_wbg_adc4d9fb-b6cc-4247-92c6-8c6392623c41.jpg?v=1725382992"},{"product_id":"zoeller-820-0004-model-e820-shark-single-directional-grinder-pump-2-0-hp-230v-1ph-20-cord-nonautomatic","title":"Zoeller 820-0004 Model E820 \"Shark\" Single Directional Grinder Pump 2.0 HP 230V 1PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"jp3t1yvzlt3n\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model E820 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tOur Model E820 Sewage Grinder Pump is designed to pump raw sewage in a sewage application.  Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology.  This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The 230 Volt, 2 HP, Model 820 utilizes a vortex impeller.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe E820 should use a control panel and control switches allowing it to turn the pump on when called upon.  The Model 820 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications.  The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model E820 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eNonautomatic Pump (Piggyback Variable Level Float Switch Available Separately)\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide over 250,000 Cuts Per Minute \u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure That it performs as Expected  When You Receive it\u003c\/li\u003e\n\u003cli\u003eComes With a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind You Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49323164401981,"sku":"ZLR820-0004","price":2114.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/820_nonauto_w.jpg?v=1725383003"},{"product_id":"zoeller-820-0006-model-i820-shark-single-directional-grinder-pump-2-0-hp-200v-1ph-20-cord-nonautomatic","title":"Zoeller 820-0006 Model I820 \"Shark\" Single Directional Grinder Pump 2.0 HP 200V 1PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\u003cimg width=\"299\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" height=\"93\" data-sz=\"f\" data-image=\"xjfohpv0x7tr\" alt=\"zoeller-logo.jpg\"\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eDiscontinued -  \u003ca href=\"https:\/\/rcworst.com\/collections\/818-and-820-grinder-pumps\" target=\"_blank\" rel=\"noopener\"\u003e818 and 820 Grinder Pumps\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model I820 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003eOur Model I820 Sewage Grinder Pump is designed to pump raw sewage in a sewage application. Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology. This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The 230 Volt, 2 HP, Model 820 utilizes a vortex impeller.\u003c\/p\u003e\n\u003cp\u003eThe I820 should use a control panel and control switches allowing it to turn the pump on when called upon. The Model 820 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications. The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.\u003c\/p\u003e\n\u003ch3\u003eZoeller Model I820 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eNonautomatic Pump (Piggyback Variable Level Float Switch Available Separately)\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure That it performs as Expected When You Receive it\u003c\/li\u003e\n\u003cli\u003eComes With a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind You Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49323165057341,"sku":"ZLR820-0006","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/820_nonauto_w_7a0eb032-73ec-40a5-a3ab-e7de9d12c1e2.jpg?v=1725383014"},{"product_id":"zoeller-840-0005-model-i840-shark-auto-reversing-grinder-pump-2-0-hp-200v-1ph-20-cord-nonautomatic","title":"Zoeller 840-0005 Model I840 \"Shark\" Auto Reversing Grinder Pump 2.0 HP 200V 1PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"34zauu1zu3zl\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 840 Auto Reversing Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tThe industry’s only automatic, reversing grinder pump is designed to pump raw sewage in a sewage ejector application.  Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology.  This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The 200 Volt, 2 HP, Model 840 utilizes a vortex impeller. Every time the pump is called to run, the cutter assembly will pump a different direction as the previous rotation.  This action reduces the potential of stringy material wrapping around the cutter assembly.\n\u003c\/p\u003e\n\u003cp\u003e\nThe Shark Series® I840 should use a control panel and control switches allowing it to turn the pump on when called upon.  The Model 840 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications.  The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.\n\u003c\/p\u003e\n\u003cp\u003e\nEvery pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 840 Auto Reversing Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation Which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eNonautomatic Grinder Pump Requires the Use of a Control Panel and Control Floats for the On\/Off Operation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure That it Performs as Expected When You Receive it\u003c\/li\u003e\n\u003cli\u003eComes with a 1-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind You Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49323167121725,"sku":"ZLR840-0005","price":2951.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/840_0004_rcw_w_0e89e6ae-c22b-4a12-922d-f4df0b7bb034.jpg?v=1725383025"},{"product_id":"zoeller-840-0006-model-f840-shark-auto-reversing-grinder-pump-2-hp-230v-3ph-20-cord-nonautomatic","title":"Zoeller 840-0006 Model F840 \"Shark\" Auto Reversing Grinder Pump 2 HP 230V 3PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"70ixp32926lu\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 840 Auto Reversing Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tThe industry’s only automatic, reversing grinder pump is designed to pump raw sewage in a sewage ejector application.  Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology.  This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The 230 Volt, 2 HP, Model 840 utilizes a vortex impeller. Every time the pump is called to run, the cutter assembly will pump a different direction as the previous rotation.  This action reduces the potential of stringy material wrapping around the cutter assembly.\n\u003c\/p\u003e\n\u003cp\u003e\nThe Shark Series® F840 should use a control panel and control switches allowing it to turn the pump on when called upon.  The Model 840 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications.  The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.\n\u003c\/p\u003e\n\u003cp\u003e\nEvery pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 840 Auto Reversing Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation Which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eNonautomatic Grinder Pump Requires the Use of a Control Panel and Control Floats for the On\/Off Operation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure That it Performs as Expected When You Receive it\u003c\/li\u003e\n\u003cli\u003eComes with a 1-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind You Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49323167449405,"sku":"ZLR840-0006","price":3560.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/840_0004_rcw_w_32f70456-89eb-48ac-9e50-2750a6797c6d.jpg?v=1725383035"},{"product_id":"zoeller-840-0007-model-j840-shark-auto-reversing-grinder-pump-2-hp-200v-3ph-20-cord-nonautomatic","title":"Zoeller 840-0007 Model J840 \"Shark\" Auto Reversing Grinder Pump 2 HP 200V 3PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"te9p046vy8be\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 840 Auto Reversing Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tThe industry’s only automatic, reversing grinder pump is designed to pump raw sewage in a sewage ejector application.  Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology.  This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The 200 Volt, 2 HP, Model 840 utilizes a vortex impeller. Every time the pump is called to run, the cutter assembly will pump a different direction as the previous rotation.  This action reduces the potential of stringy material wrapping around the cutter assembly.\n\u003c\/p\u003e\n\u003cp\u003e\nThe Shark Series® J840 should use a control panel and control switches allowing it to turn the pump on when called upon.  The Model 840 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications.  The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.\n\u003c\/p\u003e\n\u003cp\u003e\nEvery pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 840 Auto Reversing Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation Which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eNonautomatic Grinder Pump Requires the Use of a Control Panel and Control Floats for the On\/Off Operation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure That it Performs as Expected When You Receive it\u003c\/li\u003e\n\u003cli\u003eComes with a 1-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind You Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49323168039229,"sku":"ZLR840-0007","price":2883.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/840_0004_rcw_w_0176387a-6817-4177-adee-6a25f5d7cb1b.jpg?v=1725383045"},{"product_id":"zoeller-840-0008-model-g840-shark-auto-reversing-grinder-pump-2-hp-460v-3ph-20-cord-nonautomatic","title":"Zoeller 840-0008 Model G840 \"Shark\" Auto Reversing Grinder Pump 2 HP 460V 3PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"958mpa3ifhx2\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 840 Auto Reversing Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tThe industry’s only automatic, reversing grinder pump is designed to pump raw sewage in a sewage ejector application.  Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology.  This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The 460 Volt, 2 HP, Model 840 utilizes a vortex impeller. Every time the pump is called to run, the cutter assembly will pump a different direction as the previous rotation.  This action reduces the potential of stringy material wrapping around the cutter assembly.\n\u003c\/p\u003e\n\u003cp\u003e\nThe Shark Series® G840 should use a control panel and control switches allowing it to turn the pump on when called upon.  The Model 840 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications.  The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.\n\u003c\/p\u003e\n\u003cp\u003e\nEvery pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 840 Auto Reversing Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation Which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eNonautomatic Grinder Pump Requires the Use of a Control Panel and Control Floats for the On\/Off Operation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure That it Performs as Expected When You Receive it\u003c\/li\u003e\n\u003cli\u003eComes with a 1-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind You Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49323169349949,"sku":"ZLR840-0008","price":2883.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/840_0004_rcw_w_b0a0e640-33ec-4b28-8da4-db4ad6760e4d.jpg?v=1725383056"},{"product_id":"zoeller-840-0009-model-ba840-shark-auto-reversing-grinder-pump-2-hp-575v-3ph-20-cord-nonautomatic","title":"Zoeller 840-0009 Model BA840 \"Shark\" Auto Reversing Grinder Pump 2 HP 575V 3PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\u003cimg width=\"299\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" height=\"93\" data-sz=\"f\" data-image=\"zhtimi6ea2nt\" alt=\"zoeller-logo.jpg\"\u003e\u003c\/h3\u003e\n\u003ch3\u003eDiscontinued - \u003ca href=\"https:\/\/rcworst.com\/collections\/840-reversing-grinder-pump\"\u003e840 Reversing Grinder Pump\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model BA840 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003eThe Shark® series of submersible grinder pumps is designed for use in residential or commercial wastewater applications and can be used to transfer raw sewage. Each pump features an innovative cutting mechanism, allowing it to grind solids into fine particles. When used in conjunction with a properly equipped control panel, the Model 840 utilizes an automatic reversing cutter, which doubles the service life of a single-direction grinder and prevents clogging. The uniform consistency of the discharged material reduces the risk of clogs in the pipe, yielding less down time and fewer service calls. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion, and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller® pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance! This attention to detail is an inherent feature of every pump in this series, making it one of the most reliable in the industry.\u003c\/p\u003e\n\u003ch3\u003eZoeller Model BA840 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDurable, Heavy-Duty Finned Cast Iron Construction\u003c\/li\u003e\n\u003cli\u003eOil-Filled, Hermetically Sealed Motor with Class F Insulation\u003c\/li\u003e\n\u003cli\u003eHardened Stainless Steel Cutter and Disc\u003c\/li\u003e\n\u003cli\u003eCutters Protected from Abrasive Solids\u003c\/li\u003e\n\u003cli\u003eCutters can Automatically Alternate Direction to Enhance Blade Life and Free Hang-Ups\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Bolts and Lifting Bail\u003c\/li\u003e\n\u003cli\u003eEasily Adapts to Many Existing Competitors’ Rail Systems\u003c\/li\u003e\n\u003cli\u003eTandem Seals with Leak Detection\u003c\/li\u003e\n\u003cli\u003eAutomatic Thermal Overload Protection\u003c\/li\u003e\n\u003cli\u003eLegs Provide for Free Standing Installation\u003c\/li\u003e\n\u003cli\u003ePreassembled Systems Available\u003c\/li\u003e\n\u003cli\u003eCorrosion-Resistant, Powder Coated Epoxy Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Features:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReversible Cutter Action\u003c\/li\u003e\n\u003cli\u003e1-1\/4\" NPT Vertical Discharge\u003c\/li\u003e\n\u003cli\u003eCarbon\/Ceramic Tandem Seals\u003c\/li\u003e\n\u003cli\u003eBalanced Ductile Iron Impeller\u003c\/li\u003e\n\u003cli\u003eStainless Steel Cutter and Plate (R-C 5560)\u003c\/li\u003e\n\u003cli\u003eStainless Steel Shaft\u003c\/li\u003e\n\u003cli\u003eStainless Steel Lifting Bail\u003c\/li\u003e\n\u003cli\u003eCorrosion-Resistant, Powder Coated Epoxy Paint\u003c\/li\u003e\n\u003cli\u003e20' Power Cord, 20' (6m) Sensor Cord\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49323169775933,"sku":"ZLR840-0009","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/840_0004_rcw_w_f1834363-b507-49a7-86e0-75e6caa9a7c4.jpg?v=1725383066"},{"product_id":"zoeller-841-0004-model-e841-shark-single-directional-grinder-pump-2-0-hp-230v-1ph-20-cord-nonautomatic","title":"Zoeller 841-0004 Model E841 \"Shark\" Single Directional Grinder Pump 2.0 HP 230V 1PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"e7b3biie8ekp\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model E841 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n    The Shark® series of submersible grinder pumps is designed for use in\nresidential or commercial wastewater applications and can be used to transfer\nraw sewage. Each pump features an innovative cutting mechanism, allowing it\nto grind solids into fine particles. When used in conjunction with a properly\nequipped control panel, the Model 840 utilizes an automatic reversing cutter,\nwhich doubles the service life of a single-direction grinder and prevents\nclogging. The uniform consistency of the discharged material reduces the risk of\nclogs in the pipe, yielding less down time and fewer service calls. These durable\ncast iron pumps include a powder coated epoxy finish to prevent corrosion, and\nare designed to provide great heat dissipation from the motor, ensuring a long\nservice life. As with every Zoeller® pump, each one is 100% pressure-tested,\nsubmerged and run to ensure quality and reliability for years of trouble-free\nperformance! This attention to detail is an inherent feature of every pump in this\nseries, making it one of the most reliable in the industry.\n\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model E841 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFinned, Class 30 Cast Iron Construction\u003c\/li\u003e\n\u003cli\u003eCorrosion-Resistant, Powder Coated Epoxy Finish\u003c\/li\u003e\n\u003cli\u003e1-1\/4\" NPT Discharge\u003c\/li\u003e\n\u003cli\u003eHardened Stainless Steel Cutter and Disc, Rockwell C55-60\u003c\/li\u003e\n\u003cli\u003eCutters Protected from Abrasive Solids\u003c\/li\u003e\n\u003cli\u003eBronze Vortex Impeller\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Bolts and Lifting Bail\u003c\/li\u003e\n\u003cli\u003eEasily Adapts to Many Existing Competitors’ Rail Systems\u003c\/li\u003e\n\u003cli\u003eDual Mechanical Seals with Leak Detection\u003c\/li\u003e\n\u003cli\u003eAutomatic Thermal Overload Protection\u003c\/li\u003e\n\u003cli\u003eLegs Provide for Free Standing Installation\u003c\/li\u003e\n\u003cli\u003ePre-Assembled Systems Available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49323170234685,"sku":"ZLR841-0004","price":3412.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/840_0004_rcw_w_9a4cecfb-5779-4c27-b6a7-593bd8331de0.jpg?v=1725383077"},{"product_id":"zoeller-841-0005-model-i841-shark-single-directional-grinder-pump-2-0-hp-200v-1ph-20-cord-nonautomatic","title":"Zoeller 841-0005 Model I841 \"Shark\" Single Directional Grinder Pump 2.0 HP 200V 1PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"pps9shhu3zyx\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model I841 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n   The Shark® series of submersible grinder pumps is designed for use in\nresidential or commercial wastewater applications and can be used to transfer\nraw sewage. Each pump features an innovative cutting mechanism, allowing it\nto grind solids into fine particles. When used in conjunction with a properly\nequipped control panel, the Model 840 utilizes an automatic reversing cutter,\nwhich doubles the service life of a single-direction grinder and prevents\nclogging. The uniform consistency of the discharged material reduces the risk of\nclogs in the pipe, yielding less down time and fewer service calls. These durable\ncast iron pumps include a powder coated epoxy finish to prevent corrosion, and\nare designed to provide great heat dissipation from the motor, ensuring a long\nservice life. As with every Zoeller® pump, each one is 100% pressure-tested,\nsubmerged and run to ensure quality and reliability for years of trouble-free\nperformance! This attention to detail is an inherent feature of every pump in this\nseries, making it one of the most reliable in the industry.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model I841 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFinned, Class 30 Cast Iron Construction\u003c\/li\u003e\n\u003cli\u003eCorrosion-Resistant, Powder Coated Epoxy Finish\u003c\/li\u003e\n\u003cli\u003e1-1\/4\" NPT Discharge\u003c\/li\u003e\n\u003cli\u003eHardened Stainless Steel Cutter and Disc, Rockwell C55-60\u003c\/li\u003e\n\u003cli\u003eCutters Protected from Abrasive Solids\u003c\/li\u003e\n\u003cli\u003eBronze Vortex Impeller\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Bolts and Lifting Bail\u003c\/li\u003e\n\u003cli\u003eEasily Adapts to Many Existing Competitors’ Rail Systems\u003c\/li\u003e\n\u003cli\u003eDual Mechanical Seals with Leak Detection\u003c\/li\u003e\n\u003cli\u003eAutomatic Thermal Overload Protection\u003c\/li\u003e\n\u003cli\u003eLegs Provide for Free Standing Installation\u003c\/li\u003e\n\u003cli\u003ePre-Assembled Systems Available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49323170890045,"sku":"ZLR841-0005","price":3362.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/840_0004_rcw_w_9ae20421-d5d9-4845-bd6e-3b777ad37ba7.jpg?v=1725383088"},{"product_id":"zoeller-841-0006-model-j841-shark-single-directional-grinder-pump-2-hp-200v-3ph-20-cord-nonautomatic","title":"Zoeller 841-0006 Model J841 \"Shark\" Single Directional Grinder Pump 2 HP 200V 3PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"6bcrvjfhs61a\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model J841 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n    The Shark® series of submersible grinder pumps is designed for use in\nresidential or commercial wastewater applications and can be used to transfer\nraw sewage. Each pump features an innovative cutting mechanism, allowing it\nto grind solids into fine particles. When used in conjunction with a properly\nequipped control panel, the Model 840 utilizes an automatic reversing cutter,\nwhich doubles the service life of a single-direction grinder and prevents\nclogging. The uniform consistency of the discharged material reduces the risk of\nclogs in the pipe, yielding less down time and fewer service calls. These durable\ncast iron pumps include a powder coated epoxy finish to prevent corrosion, and\nare designed to provide great heat dissipation from the motor, ensuring a long\nservice life. As with every Zoeller® pump, each one is 100% pressure-tested,\nsubmerged and run to ensure quality and reliability for years of trouble-free\nperformance! This attention to detail is an inherent feature of every pump in this\nseries, making it one of the most reliable in the industry.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model J841 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFinned, Class 30 Cast Iron Construction\u003c\/li\u003e\n\u003cli\u003eCorrosion-Resistant, Powder Coated Epoxy Finish\u003c\/li\u003e\n\u003cli\u003e1-1\/4\" NPT Discharge\u003c\/li\u003e\n\u003cli\u003eHardened Stainless Steel Cutter and Disc, Rockwell C55-60\u003c\/li\u003e\n\u003cli\u003eCutters Protected from Abrasive Solids\u003c\/li\u003e\n\u003cli\u003eBronze Vortex Impeller\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Bolts and Lifting Bail\u003c\/li\u003e\n\u003cli\u003eEasily Adapts to Many Existing Competitors’ Rail Systems\u003c\/li\u003e\n\u003cli\u003eDual Mechanical Seals with Leak Detection\u003c\/li\u003e\n\u003cli\u003eLegs Provide for Free Standing Installation\u003c\/li\u003e\n\u003cli\u003ePre-Assembled Systems Available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49323171217725,"sku":"ZLR841-0006","price":2865.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/840_0004_rcw_w_15cb0089-35c6-4a47-b49d-aab805bfb90d.jpg?v=1725383098"},{"product_id":"zoeller-841-0007-model-f841-shark-single-directional-grinder-pump-2-hp-230v-3ph-20-cord-nonautomatic","title":"Zoeller 841-0007 Model F841 \"Shark\" Single Directional Grinder Pump 2 HP 230V 3PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"9p74uuhx05rp\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\nZoeller Model F841 Grinder Pump Description\n\u003c\/h3\u003e\n\u003cp\u003e\n    The Shark® series of submersible grinder pumps is designed for use in\nresidential or commercial wastewater applications and can be used to transfer\nraw sewage. Each pump features an innovative cutting mechanism, allowing it\nto grind solids into fine particles. When used in conjunction with a properly\nequipped control panel, the Model 840 utilizes an automatic reversing cutter,\nwhich doubles the service life of a single-direction grinder and prevents\nclogging. The uniform consistency of the discharged material reduces the risk of\nclogs in the pipe, yielding less down time and fewer service calls. These durable\ncast iron pumps include a powder coated epoxy finish to prevent corrosion, and\nare designed to provide great heat dissipation from the motor, ensuring a long\nservice life. As with every Zoeller® pump, each one is 100% pressure-tested,\nsubmerged and run to ensure quality and reliability for years of trouble-free\nperformance! This attention to detail is an inherent feature of every pump in this\nseries, making it one of the most reliable in the industry.\n\u003c\/p\u003e\n\u003ch3\u003e\nZoeller Model F841 Grinder Pump Features and Benefits\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFinned, Class 30 Cast Iron Construction\u003c\/li\u003e\n\u003cli\u003eCorrosion-Resistant, Powder Coated Epoxy Finish\u003c\/li\u003e\n\u003cli\u003e1-1\/4\" NPT Discharge\u003c\/li\u003e\n\u003cli\u003eHardened Stainless Steel Cutter and Disc, Rockwell C55-60\u003c\/li\u003e\n\u003cli\u003eCutters Protected from Abrasive Solids\u003c\/li\u003e\n\u003cli\u003eBronze Vortex Impeller\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Bolts and Lifting Bail\u003c\/li\u003e\n\u003cli\u003eEasily Adapts to Many Existing Competitors’ Rail Systems\u003c\/li\u003e\n\u003cli\u003eDual Mechanical Seals with Leak Detection\u003c\/li\u003e\n\u003cli\u003eLegs Provide for Free Standing Installation\u003c\/li\u003e\n\u003cli\u003ePre-Assembled Systems Available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49323172856125,"sku":"ZLR841-0007","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/840_0004_rcw_w_3a97587b-f203-4823-836b-11cdf56d1094.jpg?v=1725383109"},{"product_id":"zoeller-841-0008-model-g841-shark-single-directional-grinder-pump-2-hp-460v-3ph-20-cord-nonautomatic","title":"Zoeller 841-0008 Model G841 \"Shark\" Single Directional Grinder Pump 2 HP 460V 3PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"mngym4js367w\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model G841 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n    The Shark® series of submersible grinder pumps is designed for use in\nresidential or commercial wastewater applications and can be used to transfer\nraw sewage. Each pump features an innovative cutting mechanism, allowing it\nto grind solids into fine particles. When used in conjunction with a properly\nequipped control panel, the Model 840 utilizes an automatic reversing cutter,\nwhich doubles the service life of a single-direction grinder and prevents\nclogging. The uniform consistency of the discharged material reduces the risk of\nclogs in the pipe, yielding less down time and fewer service calls. These durable\ncast iron pumps include a powder coated epoxy finish to prevent corrosion, and\nare designed to provide great heat dissipation from the motor, ensuring a long\nservice life. As with every Zoeller® pump, each one is 100% pressure-tested,\nsubmerged and run to ensure quality and reliability for years of trouble-free\nperformance! This attention to detail is an inherent feature of every pump in this\nseries, making it one of the most reliable in the industry.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model G841 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFinned, Class 30 Cast Iron Construction\u003c\/li\u003e\n\u003cli\u003eCorrosion-Resistant, Powder Coated Epoxy Finish\u003c\/li\u003e\n\u003cli\u003e1-1\/4\" NPT Discharge\u003c\/li\u003e\n\u003cli\u003eHardened Stainless Steel Cutter and Disc, Rockwell C55-60\u003c\/li\u003e\n\u003cli\u003eCutters Protected from Abrasive Solids\u003c\/li\u003e\n\u003cli\u003eBronze Vortex Impeller\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Bolts and Lifting Bail\u003c\/li\u003e\n\u003cli\u003eEasily Adapts to Many Existing Competitors’ Rail Systems\u003c\/li\u003e\n\u003cli\u003eDual Mechanical Seals with Leak Detection\u003c\/li\u003e\n\u003cli\u003eLegs Provide for Free Standing Installation\u003c\/li\u003e\n\u003cli\u003ePre-Assembled Systems Available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49323173577021,"sku":"ZLR841-0008","price":2865.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/840_0004_rcw_w_071744e7-27c7-4c78-8e96-b60ec725e21a.jpg?v=1725383120"},{"product_id":"zoeller-803-0001-model-m803-shark-fractional-hp-grinder-pump-0-5-hp-115v-1ph-15-cord-automatic","title":"Zoeller 803-0001 Model M803 \"Shark\" Fractional HP Grinder Pump 0.5 HP 115V 1PH 15' Cord Automatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"opjs4x76rp4h\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 803 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tThe Shark Series® Model M803 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1\/2 HP 803 is a time-tested and reliable grinder pump.  The M803 is a fully automatic float-operated sewage pump.  The white polypropylene float is solid so it cannot become waterlogged.  This ensures that it is always buoyant and able to turn the pump on when necessary.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″.  The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe Model 803’s switch case, motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 803 is able to withstand the most demanding sewage ejector applications.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 803 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eAutomatic Pump with a Time-Tested, Reliable, Present, Built-In Snap Action Switch that Makes for Easy Installation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003eStainless Steel Float Guard that Prevents Material or Debris from Collecting on the Float Ensuring Proper Operation Every Time\u003c\/li\u003e\n\u003cli\u003eSolid, Buoyant, Polypropylene Float to Eliminate the Possibility of Water Infiltration Allowing the Float to Remain Buoyant and Functional at All Times\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistant and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Switch Arm, Guard, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested- Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected When you Receive it\u003c\/li\u003e\n\u003cli\u003eComes with a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327816868157,"sku":"ZLR803-0001","price":1161.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr80xxxxx_001_wbg.jpg?v=1725458715"},{"product_id":"zoeller-803-0002-model-n803-shark-fractional-hp-grinder-pump-0-5-hp-115v-1ph-15-cord-nonautomatic","title":"Zoeller 803-0002 Model N803 \"Shark\" Fractional HP Grinder Pump 0.5 HP 115V 1PH 15' Cord Nonautomatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"fhqid91psc40\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 803 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tThe Shark Series® Model N803 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1\/2 HP 803 is a time-tested and reliable grinder pump.  The N803 is a nonautomatic pump equipped with a single piggyback float switch.  The piggyback float switch allows you to set the on and off point of the pump in the field.  This is ideal in an application with a deep sump pit or pump tank.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″.  The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe Model 803’s switch case, motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 803 is able to withstand the most demanding sewage ejector applications.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 803 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eNonautomatic Pump (Piggyback Variable Level Float Switch Available Separately)\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistant and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Switch Arm, Guard, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested- Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected When you Receive it\u003c\/li\u003e\n\u003cli\u003eComes with a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327816933693,"sku":"ZLR803-0002","price":1138.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr80xxxxxn_001_wbg.jpg?v=1725458725"},{"product_id":"zoeller-803-0003-model-d803-shark-fractional-hp-grinder-pump-0-5-hp-230v-1ph-15-cord-automatic","title":"Zoeller 803-0003 Model D803 \"Shark\" Fractional HP Grinder Pump 0.5 HP 230V 1PH 15' Cord Automatic","description":"\u003ch3\u003e\u003cimg width=\"299\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" height=\"93\" data-sz=\"f\" data-image=\"8tmd3173nj8y\" alt=\"zoeller-logo.jpg\"\u003e\u003c\/h3\u003e\n\u003ch3\u003eDiscontinued - \u003ca rel=\"noopener\" href=\"https:\/\/rcworst.com\/collections\/grinder-pumps-1?_gl=1*l1iaea*_gcl_au*MTg4MzY5OTA2NC4xNzcwOTM3MjQ0LjEzNTQxOTU4NDguMTc3NTE1Nzk5MS4xNzc1MTU3OTkx*_ga*NjU2NzMyNDMuMTc3MDkzNzI0NA..*_ga_JGVP8VV3J2*czE3NzU3NDg4NzIkbzExNSRnMSR0MTc3NTc2MDc4MyRqMTIkbDAkaDA.\" target=\"_blank\"\u003eZoeller Grinder Pumps\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 803 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003eThe Shark Series® Model D803 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1\/2 HP 803 is a time-tested and reliable grinder pump. The D803 is a fully automatic float-operated sewage pump. The white polypropylene float is solid so it cannot become waterlogged. This ensures that it is always buoyant and able to turn the pump on when necessary.\u003c\/p\u003e\n\u003cp\u003eThe industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.\u003c\/p\u003e\n\u003cp\u003eThe Model 803’s switch case, motor housing, pump housing, and base are each constructed of cast iron. The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 803 is able to withstand the most demanding sewage ejector applications.\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 803 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eAutomatic Pump with a Time-Tested, Reliable, Present, Built-In Snap Action Switch that Makes for Easy Installation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003eStainless Steel Float Guard that Prevents Material or Debris from Collecting on the Float Ensuring Proper Operation Every Time\u003c\/li\u003e\n\u003cli\u003eSolid, Buoyant, Polypropylene Float to Eliminate the Possibility of Water Infiltration Allowing the Float to Remain Buoyant and Functional at All Times\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistant and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Switch Arm, Guard, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested- Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected When you Receive it\u003c\/li\u003e\n\u003cli\u003eComes with a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327817818429,"sku":"ZLR803-0003","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr80xxxxx_001_wbg_140889b3-4d6a-465f-8aa9-72c127596890.jpg?v=1725458735"},{"product_id":"zoeller-803-0005-model-bn803-shark-fractional-hp-grinder-pump-0-5-hp-115v-1ph-15-cord-automatic","title":"Zoeller 803-0005 Model BN803 \"Shark\" Fractional HP Grinder Pump 0.5 HP 115V 1PH 15' Cord Automatic","description":"\u003ch3\u003e\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"iczc0l0seh50\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 803 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003eOur Model BN803 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1\/2 HP 803 is a time-tested and reliable grinder pump. Model BN803 comes with a piggyback switch.\u003c\/p\u003e\n\u003cp\u003eThe industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.\u003c\/p\u003e\n\u003cp\u003eThe Model 803’s switch case, motor housing, pump housing, and base are each constructed of cast iron. The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 803 is able to withstand the most demanding sewage ejector applications.\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 803 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eAutomatic Pump with a Time-Tested, Reliable, Present, Built-In Snap Action Switch that Makes for Easy Installation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003eStainless Steel Float Guard that Prevents Material or Debris from Collecting on the Float Ensuring Proper Operation Every Time\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistant and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Switch Arm, Guard, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested- Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected When you Receive it\u003c\/li\u003e\n\u003cli\u003eComes with a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327818015037,"sku":"ZLR803-0005","price":1186.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr803xxxxa_001_wbg.jpg?v=1725458755"},{"product_id":"zoeller-803-0006-model-be803-shark-fractional-hp-grinder-pump-0-5-hp-230v-1ph-15-cord-automatic","title":"Zoeller 803-0006 Model BE803 \"Shark\" Fractional HP Grinder Pump 0.5 HP 230V 1PH 15' Cord Automatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"di3ebq6sh6qb\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 803 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tOur Model BE803 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1\/2 HP 803 is a time-tested and reliable grinder pump.  Model BE803 comes with a piggyback switch.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″.  The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe Model 803’s switch case, motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 803 is able to withstand the most demanding sewage ejector applications.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 803 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eAutomatic Pump with a Time-Tested, Reliable, Present, Built-In Snap Action Switch that Makes for Easy Installation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003eStainless Steel Float Guard that Prevents Material or Debris from Collecting on the Float Ensuring Proper Operation Every Time\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistant and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Switch Arm, Guard, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested- Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected When you Receive it\u003c\/li\u003e\n\u003cli\u003eComes with a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327818113341,"sku":"ZLR803-0006","price":1599.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr803xxxxa_001_wbg_f6a6d25d-da9e-4e8c-88cf-089e62bd25da.jpg?v=1725458765"},{"product_id":"zoeller-805-0001-model-m805-shark-fractional-hp-grinder-pump-0-75-hp-115v-1ph-15-cord-automatic","title":"Zoeller 805-0001 Model M805 \"Shark\" Fractional HP Grinder Pump 0.75 HP 115V 1PH 15' Cord Automatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"1iz01hj14u3s\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model M805 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tOur Model M805 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 3\/4 HP 805 is a time-tested and reliable grinder pump.  The M805 is a fully automatic float-operated sewage pump.  The white polypropylene float is solid so it cannot become waterlogged.  This ensures that it is always buoyant and able to turn the pump on when necessary.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″.  The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe Model 805’s switch case, motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 805 is able to withstand the most demanding sewage ejector applications.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model M805 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eAutomatic Pump with a Time-Tested, Reliable, Present, Built-In Snap Action Switch that Makes for Easy Installation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003eStainless Steel Float Guard that Prevents Material or Debris from Collecting on the Float Ensuring Proper Operation Every Time\u003c\/li\u003e\n\u003cli\u003eSolid, Buoyant, Polypropylene Float to Eliminate the Possibility of Water Infiltration Allowing the Float to Remain Buoyant and Functional at All Times\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistant and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Switch Arm, Guard, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested- Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected When you Receive it\u003c\/li\u003e\n\u003cli\u003eComes with a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327818998077,"sku":"ZLR805-0001","price":1249.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr80xxxxx_001_wbg_c4827a8d-29c5-4bee-8535-1ccaa313ebb1.jpg?v=1725458775"},{"product_id":"zoeller-805-0002-model-n805-shark-fractional-hp-grinder-pump-0-75-hp-115v-1ph-15-cord-nonautomatic","title":"Zoeller 805-0002 Model N805 \"Shark\" Fractional HP Grinder Pump 0.75 HP 115V 1PH 15' Cord Nonautomatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"2d8q5pa7vxdu\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model N805 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tOur Model N805 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 3\/4 HP 805 is a time-tested and reliable grinder pump.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″.  The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe Model 805’s switch case, motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 805 is able to withstand the most demanding sewage ejector applications.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model N805 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistant and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Switch Arm, Guard, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested- Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected When you Receive it\u003c\/li\u003e\n\u003cli\u003eComes with a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327819063613,"sku":"ZLR805-0002","price":1227.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr80xxxxxn_001_wbg_fb33a85f-32ea-4e80-85e6-1e4a13bc6b17.jpg?v=1725458784"},{"product_id":"zoeller-805-0005-model-bn805-shark-fractional-hp-grinder-pump-0-75-hp-115v-1ph-15-cord-automatic","title":"Zoeller 805-0005 Model BN805 \"Shark\" Fractional HP Grinder Pump 0.75 HP 115V 1PH 15' Cord Automatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"hrt4vvixgdhd\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model BN805 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tOur Model BN805 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 3\/4 HP 805 is a time-tested and reliable grinder pump.  Model BN805 comes with a piggyback switch.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″.  The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe Model 803’s switch case, motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 803 is able to withstand the most demanding sewage ejector applications.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model BN805 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eAutomatic Pump with a Time-Tested, Reliable, Present, Built-In Snap Action Switch that Makes for Easy Installation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003eStainless Steel Float Guard that Prevents Material or Debris from Collecting on the Float Ensuring Proper Operation Every Time\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistant and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Switch Arm, Guard, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested- Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected When you Receive it\u003c\/li\u003e\n\u003cli\u003eComes with a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327820538173,"sku":"ZLR805-0005","price":1661.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr803xxxxa_001_wbg_3ba24f4f-5747-4f1a-a635-6d5427232be9.jpg?v=1725458813"},{"product_id":"zoeller-805-0006-model-be805-shark-fractional-hp-grinder-pump-0-75-hp-230v-1ph-15-cord-automatic","title":"Zoeller 805-0006 Model BE805 \"Shark\" Fractional HP Grinder Pump 0.75 HP 230V 1PH 15' Cord Automatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"1pcwpbzviuhj\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model BE805 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tOur Model BE805 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 3\/4 HP 805 is a time-tested and reliable grinder pump.  Model BE805 comes with a piggyback switch.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″.  The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe Model 803’s switch case, motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 803 is able to withstand the most demanding sewage ejector applications.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model BE805 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eAutomatic Pump with a Time-Tested, Reliable, Present, Built-In Snap Action Switch that Makes for Easy Installation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003eStainless Steel Float Guard that Prevents Material or Debris from Collecting on the Float Ensuring Proper Operation Every Time\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistant and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Switch Arm, Guard, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested- Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected When you Receive it\u003c\/li\u003e\n\u003cli\u003eComes with a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327820603709,"sku":"ZLR805-0006","price":1599.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr803xxxxa_001_wbg_981962fa-325a-4269-be5a-df538b7b72aa.jpg?v=1725458823"},{"product_id":"zoeller-807-0001-model-m807-shark-fractional-hp-grinder-pump-1-0-hp-115v-1ph-15-cord-automatic","title":"Zoeller 807-0001 Model M807 \"Shark\" Fractional HP Grinder Pump 1.0 HP 115V 1PH 15' Cord Automatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"zebmqco7v3n9\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 807 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tThe Shark Series® Model M807 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1 HP 807 is a time-tested and reliable grinder pump.  The M807 is a fully automatic float-operated sewage pump.  The white polypropylene float is solid so it cannot become waterlogged.  This ensures that it is always buoyant and able to turn the pump on when necessary.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″.  The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe Model 807’s switch case, motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 807 is able to withstand the most demanding sewage ejector applications.\n\u003c\/p\u003e\n\u003ch3\u003e\nZoeller Model 807 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation Which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eAutomatic Pump with a Time-Tested, Reliable, Preset, Built-In Snap Action Switch that Makes for an Easy Installation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute.\u003c\/li\u003e\n\u003cli\u003eStainless Steel Float Guard that Prevents Material or Debris form Collecting on the Float Ensuring Proper Operation Every Time\u003c\/li\u003e\n\u003cli\u003eSolid, Buoyant, Polypropylene Float to Eliminate the Possibility of Water Infiltration Allowing the Float to Remain Buoyant and Functional at all Times\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Switch Arm, Guard, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected When You Receive it\u003c\/li\u003e\n\u003cli\u003eComes With a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327820833085,"sku":"ZLR807-0001","price":1354.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr80xxxxx_001_wbg_ef5d1cdd-918a-4cb5-a64a-83b1174f0423.jpg?v=1725458833"},{"product_id":"zoeller-807-0002-model-n807-shark-fractional-hp-grinder-pump-1-0-hp-115v-1ph-15-cord-nonautomatic","title":"Zoeller 807-0002 Model N807 \"Shark\" Fractional HP Grinder Pump 1.0 HP 115V 1PH 15' Cord Nonautomatic","description":"\u003ch3\u003e\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"rpirtq6seijx\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 807 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003eThe Shark Series® Model N807 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1 HP 807 is a time-tested and reliable grinder pump. The N807 is a nonautomatic pump equipped with a single piggyback float switch. The piggyback float switch allows you to set the on and off point of the pump in the field. This is ideal in an application with a deep sump pit or pump tank.\u003c\/p\u003e\n\u003cp\u003eThe industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.\u003c\/p\u003e\n\u003cp\u003eThe Model 807’s motor housing, pump housing, and base are each constructed of cast iron. The pump’s identification tag, handle, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 807 is able to withstand the most demanding sewage ejector applications.\u003c\/p\u003e\n\u003cp\u003eEvery pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 807 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eNonautomatic Pump (Piggyback Variable Level Float Switch Available Separately)\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected When you Receive it\u003c\/li\u003e\n\u003cli\u003eComes with a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327820898621,"sku":"ZLR807-0002","price":1330.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr80xxxxxn_001_wbg_861144e5-c688-4f14-b357-a1383ffa8ac2.jpg?v=1725458842"},{"product_id":"zoeller-807-0003-model-d807-shark-fractional-hp-grinder-pump-1-0-hp-230v-1ph-15-cord-automatic","title":"Zoeller 807-0003 Model D807 \"Shark\" Fractional HP Grinder Pump 1.0 HP 230V 1PH 15' Cord Automatic","description":"\u003cp\u003e\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"qkcb5icgy4kv\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 807 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003eThe Shark Series® Model D807 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1 HP 807 is a time-tested and reliable grinder pump. The D807 is a fully automatic float-operated sewage pump. The white polypropylene float is solid so it cannot become waterlogged. This ensures that it is always buoyant and able to turn the pump on when necessary.\u003c\/p\u003e\n\u003cp\u003eThe industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.\u003c\/p\u003e\n\u003cp\u003eThe Model 807’s switch case, motor housing, pump housing, and base are each constructed of cast iron. The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 807 is able to withstand the most demanding sewage ejector applications.\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 807 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation Which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eAutomatic Pump with a Time-Tested, Reliable, Preset, Built-In Snap Action Switch that Makes for an Easy Installation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute.\u003c\/li\u003e\n\u003cli\u003eStainless Steel Float Guard that Prevents Material or Debris form Collecting on the Float Ensuring Proper Operation Every Time\u003c\/li\u003e\n\u003cli\u003eSolid, Buoyant, Polypropylene Float to Eliminate the Possibility of Water Infiltration Allowing the Float to Remain Buoyant and Functional at all Times\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Switch Arm, Guard, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected When You Receive it\u003c\/li\u003e\n\u003cli\u003eComes With a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327821816125,"sku":"ZLR807-0003","price":1672.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr80xxxxx_001_wbg_96cd4877-cfc4-4913-9e88-385cb98b03aa.jpg?v=1725458852"},{"product_id":"zoeller-807-0004-model-e807-shark-fractional-hp-grinder-pump-1-0-hp-230v-1ph-15-cord-nonautomatic","title":"Zoeller 807-0004 Model E807 \"Shark\" Fractional HP Grinder Pump 1.0 HP 230V 1PH 15' Cord Nonautomatic","description":"\u003ch3\u003e\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"3x1aj0sowjix\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\u003c\/h3\u003e\n\u003ch3\u003eDiscontinued - \u003ca href=\"https:\/\/rcworst.com\/collections\/grinder-pumps-1?_gl=1*l1iaea*_gcl_au*MTg4MzY5OTA2NC4xNzcwOTM3MjQ0LjEzNTQxOTU4NDguMTc3NTE1Nzk5MS4xNzc1MTU3OTkx*_ga*NjU2NzMyNDMuMTc3MDkzNzI0NA..*_ga_JGVP8VV3J2*czE3NzU3NDg4NzIkbzExNSRnMSR0MTc3NTc2MDc4MyRqMTIkbDAkaDA.\" target=\"_blank\" rel=\"noopener\"\u003eZoeller Grinder Pumps\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 807 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003eThe Shark Series® Model E807 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1 HP 807 is a time-tested and reliable grinder pump. The E807 is a nonautomatic pump equipped with a single piggyback float switch. The piggyback float switch allows you to set the on and off point of the pump in the field. This is ideal in an application with a deep sump pit or pump tank.\u003c\/p\u003e\n\u003cp\u003eThe industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.\u003c\/p\u003e\n\u003cp\u003eThe Model 807’s motor housing, pump housing, and base are each constructed of cast iron. The pump’s identification tag, handle, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 807 is able to withstand the most demanding sewage ejector applications.\u003c\/p\u003e\n\u003cp\u003eEvery pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 807 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eNonautomatic Pump (Piggyback Variable Levenl Float Switch Available Separately)\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected When you Recieve it\u003c\/li\u003e\n\u003cli\u003eComes with a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327821947197,"sku":"ZLR807-0004","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr80xxxxxn_001_wbg_251fc55d-9df4-4dc6-a227-97ce1273b894.jpg?v=1725458862"},{"product_id":"zoeller-807-0005-model-bn807-shark-fractional-hp-grinder-pump-1-0-hp-115v-1ph-15-cord-automatic","title":"Zoeller 807-0005 Model BN807 \"Shark\" Fractional HP Grinder Pump 1.0 HP 115V 1PH 15' Cord Automatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"ba0z9f9oco5i\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\nZoeller Model BN807 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tFractional HP Grinder Series. World's first integral automatic grinder. All cast\niron grinder series for difficult residential applications where ejectors struggle.\nHandles entire household of \"flushable\" materials. 115\/230 volt grinders for\nresidential use without commercial grinder costs.\n\u003c\/p\u003e\n\u003ch3\u003e\nZoeller Model BN807 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e803 - ½ HP, 805 - ¾ HP, 807 - 1 HP\u003c\/li\u003e\n\u003cli\u003ePerformance up to 55' (16.8 m)\u003c\/li\u003e\n\u003cli\u003e115\/230 V grinders for residential use without commercial grinder costs\u003c\/li\u003e\n\u003cli\u003eOil-Filled, Hermetically Sealed Motor with Class B Insulation, Automatic Reset Thermal Overload Protected\u003c\/li\u003e\n\u003cli\u003eOil filled for optimal heat dissipation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® cutter technology - three independent cutting channels provide over 250,000 cuts per minute.\u003c\/li\u003e\n\u003cli\u003eStainless steel cutter and plate\u003c\/li\u003e\n\u003cli\u003eAutomatic and nonautomatic available\u003c\/li\u003e\n\u003cli\u003e100% factory tested\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327822111037,"sku":"ZLR807-0005","price":1380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr803xxxxa_001_wbg_1d74c495-0834-4d01-b090-f0e4a6b9d79f.jpg?v=1725458872"},{"product_id":"zoeller-807-0006-model-be807-shark-fractional-hp-grinder-pump-1-0-hp-230v-1ph-15-cord-automatic","title":"Zoeller 807-0006 Model BE807 \"Shark\" Fractional HP Grinder Pump 1.0 HP 230V 1PH 15' Cord Automatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"f2zj27134ai5\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model BE807 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tThe Shark Series Grinder Pump is designed to remove raw sewage  in sewage ejector applications. The professional-grade, 1 HP 807 os a time-tested and reliable grinder pump. The industry proven \"scissor like\" Tri-Slice cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8\". The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.\n\u003c\/p\u003e\n\u003cp\u003e\n  The Model 807's switch case, motor housing, pump housing and base are each constructed of cast iron. The pumps' identification tag, float guard, handle, switch arm and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 807 is able to withstand the most demanding sewage ejector applications.\n\u003c\/p\u003e\n\u003cp\u003eEvery pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box\u003c\/p\u003e\n\u003ch3\u003eZoeller Model BE807 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eAutomatic Pump with a Time-Tested, Reliable, Preset, Built-In Snap Action that Makes for and Easy Installation\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice Cutter Technology: Three Independent Cutting Channels Provide over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003eStainless Steel Float Guard that Prevents Material and Debris from Collecting on the Float Ensuring Proper Operation Every Time\u003c\/li\u003e\n\u003cli\u003eSolid, Buoyant, Polypropylene Float to Eliminate the Possibility of Water Infiltration Allowing the Float to Remain Buoyant and Functional at all Times\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Switch Arm, Guard, Handle and Hardware to prevent Rust and Corrosion over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected when you Receive it.\u003c\/li\u003e\n\u003cli\u003eComes with a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327822242109,"sku":"ZLR807-0006","price":1591.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr803xxxxa_001_wbg_222d4b24-c4a4-4fac-ac58-0f58b348b5e0.jpg?v=1725458882"},{"product_id":"zoeller-810-0004-model-e810-shark-progressing-cavity-grinder-pump-1-0-hp-230v-1ph-20-cord-nonautomatic","title":"Zoeller 810-0004 Model E810 \"Shark\" Progressing Cavity Grinder Pump 1.0 HP 230V 1PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"x46adir9lm49\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 810 Progressing Cavity Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tThe Shark Series® Model 810 Progressing Cavity Grinder Pump is designed to pump raw sewage in sewage ejector applications when pumping to pressurized sewer main.  Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology.  This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe E810, should use a control panel and control switches allowing it to turn the pump on when called upon.  The Model 810 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications.  The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.\n\u003c\/p\u003e\n\u003cp\u003e\nEvery pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 810 Progressing Cavity Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation Which Prevents the Pump From Overheating\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute \u003c\/li\u003e\n\u003cli\u003e100% Factory Tested- Every Pump is Submerged in Water and Tested at the Factory to Ensure That it Performs as Expected When you Receive it\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Reistant and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003ePressure Relief Valve Helps Prevent Damage to Your Piping System When the Pressures in the City Main are Greater Than the Pumps PSI Rating\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003eComes With a 2-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind You Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327822471485,"sku":"ZLR810-0004","price":1973.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/810_815grinder_001_wbg.jpg?v=1725458893"},{"product_id":"zoeller-815-0004-model-e815-shark-progressing-cavity-grinder-pump-2-0-hp-230v-1ph-20-cord-nonautomatic","title":"Zoeller 815-0004 Model E815 \"Shark\" Progressing Cavity Grinder Pump 2.0 HP 230V 1PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"72prm7t06h1k\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 815 Progressing Cavity Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tThe Shark Series® Model 815 Progressing Cavity Grinder Pump is designed to pump raw sewage in sewage ejector applications when pumping to pressurized sewer main.  Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology.  This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″.\n\u003c\/p\u003e\n\u003cp\u003e\nThe E815, should use a control panel and control switches allowing it to turn the pump on when called upon.  The Model 815 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications.  The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.\n\u003c\/p\u003e\n\u003cp\u003e\nEvery pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 815 Progressing Cavity Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump From Overheating\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003ePressure Relief Valve Helps Prevent Damage to Your Piping System when the Pressures in the City Main are Greater than the Pumps PSI Rating\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected when You Receive It\u003c\/li\u003e\n\u003cli\u003eComes with a 2-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49327822668093,"sku":"ZLR815-0004","price":2180.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/810_815grinder_001_wbg_630628e0-5b36-4c6f-b6bb-c41196ae5b7b.jpg?v=1725458903"},{"product_id":"zoeller-818-0006-model-wm818-shark-single-directional-grinder-pump-1-0-hp-115v-1ph-20-cord-automatic","title":"Zoeller 818-0006 Model WM818 \"Shark\" Single Directional Grinder Pump 1.0 HP 115V 1PH 20' Cord Automatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"wslc099jvw39\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 818 Single Directional Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tOur Model WM818 Sewage Grinder Pump is designed to pump raw sewage in a sewage application.  Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology.  This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The 115 Volt, 1 HP, Model 818 utilizes a vortex impeller.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe WM818 should use a control panel and control switches allowing it to turn the pump on when called upon.  The Model 818 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications.  The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.\n\u003c\/p\u003e\n\u003cp\u003e\nEvery pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 818 Single Directional Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eNonautomatic Pump (Piggyback Variable Level Float Switch Available Separately)\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide over 250,000 Cuts Per Minute \u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure That it performs as Expected  When You Receive it\u003c\/li\u003e\n\u003cli\u003eComes With a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind You Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49328941236541,"sku":"ZLR818-0006","price":2335.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr818xxxxa_001_wbg_dbed6e74-1490-4c64-b811-182d8935d310.jpg?v=1725481737"},{"product_id":"zoeller-818-0002-model-n818-shark-single-directional-grinder-pump-1-0-hp-115v-1ph-20-cord-nonautomatic","title":"Zoeller 818-0002 Model N818 \"Shark\" Single Directional Grinder Pump 1.0 HP 115V 1PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\n\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"0yulzs12s1or\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model 818 Single Directional Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003e\n\tOur Model N818 Sewage Grinder Pump is designed to pump raw sewage in a sewage application.  Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology.  This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The 115 Volt, 1 HP, Model 818 utilizes a vortex impeller.\n\u003c\/p\u003e\n\u003cp\u003e\n\tThe N818 should use a control panel and control switches allowing it to turn the pump on when called upon.  The Model 818 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications.  The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.\n\u003c\/p\u003e\n\u003cp\u003e\nEvery pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.\n\u003c\/p\u003e\n\u003ch3\u003eZoeller Model 818 Single Directional Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eNonautomatic Pump (Piggyback Variable Level Float Switch Available Separately)\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide over 250,000 Cuts Per Minute \u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure That it performs as Expected  When You Receive it\u003c\/li\u003e\n\u003cli\u003eComes With a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind You Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49328941498685,"sku":"ZLR818-0002","price":1868.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/820_nonauto_w_8eafb7d9-61b2-44dc-9742-3d6e16744760.jpg?v=1725481748"},{"product_id":"zoeller-818-0008-model-wh818-shark-single-directional-grinder-pump-1-0-hp-200-208v-1ph-20-cord-automatic","title":"Zoeller 818-0008 Model WH818 \"Shark\" Single Directional Grinder Pump 1.0 HP 200-208V 1PH 20' Cord Automatic","description":"\u003ch3\u003e\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"13rlq3tkzfut\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\u003c\/h3\u003e\n\u003ch3\u003eDiscontinued \u003ca rel=\"noopener\" href=\"https:\/\/rcworst.com\/collections\/818-and-820-grinder-pumps?_gl=1*1rek334*_gcl_au*MTg4MzY5OTA2NC4xNzcwOTM3MjQ0LjEwMzMwODQ5MDguMTc3NDk5NDk2MC4xNzc0OTk0OTU5*_ga*NjU2NzMyNDMuMTc3MDkzNzI0NA..*_ga_JGVP8VV3J2*czE3NzUwNTg0Njkkbzk4JGcxJHQxNzc1MDYwNTk5JGoyOCRsMCRoMA..\" target=\"_blank\"\u003eSee 818 and 820 Grinder Pumps\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model WH818 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003eOur Model WH818 Sewage Grinder Pump is designed to pump raw sewage in a sewage application. Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology. This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The 115 Volt, 1 HP, Model 818 utilizes a vortex impeller.\u003c\/p\u003e\n\u003cp\u003eThe WH818 should use a control panel and control switches allowing it to turn the pump on when called upon. The Model 818 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications. The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.\u003c\/p\u003e\n\u003ch3\u003eZoeller Model WH818 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eNonautomatic Pump (Piggyback Variable Level Float Switch Available Separately)\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure That it performs as Expected When You Receive it\u003c\/li\u003e\n\u003cli\u003eComes With a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind You Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49328942088509,"sku":"ZLR818-0008","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr818xxxxa_001_wbg_9e75a017-d4e8-42d3-9a07-7a53369cc0bc.jpg?v=1725481758"},{"product_id":"zoeller-818-0005-model-i818-shark-single-directional-grinder-pump-1-0-hp-200-208v-1ph-20-cord-nonautomatic","title":"Zoeller 818-0005 Model I818 \"Shark\" Single Directional Grinder Pump 1.0 HP 200-208V 1PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"n1dmh01hv0ac\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\u003c\/h3\u003e\n\u003ch3\u003eDiscontinued - \u003ca href=\"https:\/\/rcworst.com\/collections\/grinder-pumps-1\" target=\"_blank\" rel=\"noopener\"\u003eZoeller Grinder Pumps\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model I818 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003eOur Model I818 Sewage Grinder Pump is designed to pump raw sewage in a sewage application. Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology. This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The 115 Volt, 1 HP, Model 818 utilizes a vortex impeller.\u003c\/p\u003e\n\u003cp\u003eThe I818 should use a control panel and control switches allowing it to turn the pump on when called upon. The Model 818 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications. The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.\u003c\/p\u003e\n\u003ch3\u003eZoeller Model I818 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eNonautomatic Pump (Piggyback Variable Level Float Switch Available Separately)\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure That it performs as Expected When You Receive it\u003c\/li\u003e\n\u003cli\u003eComes With a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind You Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49328942252349,"sku":"ZLR818-0005","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/820_nonauto_w_d98c567e-d225-4416-878e-437668e111a1.jpg?v=1725481767"},{"product_id":"zoeller-818-0007-model-wd818-shark-single-directional-grinder-pump-1-0-hp-230v-1ph-20-cord-automatic","title":"Zoeller 818-0007 Model WD818 \"Shark\" Single Directional Grinder Pump 1.0 HP 230V 1PH 20' Cord Automatic","description":"\u003ch3\u003e\u003cimg alt=\"zoeller-logo.jpg\" data-image=\"ccg8il4m2524\" data-sz=\"f\" height=\"93\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" width=\"299\"\u003e\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model WD818 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003eOur Model WD818 Sewage Grinder Pump is designed to pump raw sewage in a sewage application. Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology. This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1\/8″. The 115 Volt, 1 HP, Model 818 utilizes a vortex impeller.\u003c\/p\u003e\n\u003cp\u003eThe WD818 should use a control panel and control switches allowing it to turn the pump on when called upon. The Model 818 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications. The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.\u003c\/p\u003e\n\u003ch3\u003eZoeller Model WD818 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating\u003c\/li\u003e\n\u003cli\u003eNonautomatic Pump (Piggyback Variable Level Float Switch Available Separately)\u003c\/li\u003e\n\u003cli\u003eProven Tri-Slice® Cutter Technology: Three Independent Cutting Channels Provide over 250,000 Cuts Per Minute\u003c\/li\u003e\n\u003cli\u003ePowder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion Over the Life of the Pump\u003c\/li\u003e\n\u003cli\u003e100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure That it performs as Expected When You Receive it\u003c\/li\u003e\n\u003cli\u003eComes With a 3-Year Limited Warranty Giving You Protection Over Your Investment and the Peace of Mind You Expect in a Quality Product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49328942383421,"sku":"ZLR818-0007","price":2260.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zlr818xxxxa_001_wbg_493cfac3-44e5-4515-8807-2139f8bf2a03.jpg?v=1725481777"},{"product_id":"zoeller-819-0005-model-i819-shark-single-directional-grinder-pump-1-5-hp-200-208v-1ph-20-cord-nonautomatic","title":"Zoeller 819-0005 Model I819 \"Shark\" Single Directional Grinder Pump 1.5 HP 200-208V 1PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\u003cimg width=\"299\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" height=\"93\" data-sz=\"f\" data-image=\"yj3xp6nu5q75\" alt=\"zoeller-logo.jpg\"\u003e\u003c\/h3\u003e\n\u003ch3\u003eDiscontinued -\u003ca rel=\"noopener\" href=\"https:\/\/rcworst.com\/products\/zoeller-820-0005-model-wh820-shark-single-directional-grinder-pump-2-0-hp-200v-1ph-20-cord-automatic\" target=\"_blank\"\u003e  Zoeller 820-0005 Model WH820 \"Shark\" Single Directional Grinder Pump 2.0 HP 200V 1PH 20' Cord Automatic\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model I819 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003eThis series of submersible pumps is designed for use in residential or commercial wastewater applications and can be used to transfer wastewater or unscreened raw sewage. Each pump features an innovative cutting mechanism allowing it to grind solids into fine particles. The uniform consistency of the discharged material lessens the risk of clogs in the pipe, yielding less down time and fewer service calls. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion, and are designed to provide great heat dissipation from the motor. As with every Zoeller® pump, each one is 100% factory tested to ensure quality and reliability for years of trouble-free performance!\u003c\/p\u003e\n\u003ch3\u003eZoeller Model I819 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDurable Heavy-Duty, Finned Cast Iron Construction\u003c\/li\u003e\n\u003cli\u003eLegs Provided for Free-Standing Installation\u003c\/li\u003e\n\u003cli\u003eOil-Filled, Hermetically Sealed Motor with Class B Insulation, Automatic Reset Thermal Overload Protected\u003c\/li\u003e\n\u003cli\u003eHardened Stainless Steel Cutter and Disc\u003c\/li\u003e\n\u003cli\u003eCutters Protected from Abrasive Solids\u003c\/li\u003e\n\u003cli\u003eStainless Steel Lifting Handle, Screws and Bolts\u003c\/li\u003e\n\u003cli\u003eEasily Adapts to Rail Systems\u003c\/li\u003e\n\u003cli\u003eMechanical Shaft Seal - Carbon\/Ceramic\u003c\/li\u003e\n\u003cli\u003eControl Panels not Required\u003c\/li\u003e\n\u003cli\u003eSimplex Grinder Package Systems (unassembled and job ready\/assembled) available\u003c\/li\u003e\n\u003cli\u003eCorrosion-Resistant, Powder Coated Epoxy Finish\u003c\/li\u003e\n\u003cli\u003eMaximum Operating Temperature: 130°F (54°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Features:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1¼” NPT Vertical Discharge\u003c\/li\u003e\n\u003cli\u003eCarbon\/Ceramic Seals\u003c\/li\u003e\n\u003cli\u003eThermal Overload Protection\u003c\/li\u003e\n\u003cli\u003eEngineered Plastic Impeller\u003c\/li\u003e\n\u003cli\u003eStainless Steel Cutter Plate\/Cutter\u003c\/li\u003e\n\u003cli\u003eStainless Steel Shaft\u003c\/li\u003e\n\u003cli\u003eStainless Steel Hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49328944611645,"sku":"ZLR819-0005","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/820_nonauto_w_4853ab96-f175-40d8-b96f-113e240865b0.jpg?v=1725481807"},{"product_id":"zoeller-819-0004-model-e819-shark-single-directional-grinder-pump-1-5-hp-230v-1ph-20-cord-nonautomatic","title":"Zoeller 819-0004 Model E819 \"Shark\" Single Directional Grinder Pump 1.5 HP 230V 1PH 20' Cord Nonautomatic","description":"\u003ch3\u003e\u003cimg width=\"299\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/zoeller-logo.jpg\" height=\"93\" data-sz=\"f\" data-image=\"1tqv058q3tl4\" alt=\"zoeller-logo.jpg\"\u003e\u003c\/h3\u003e\n\u003ch3\u003eDiscontinued - \u003ca rel=\"noopener\" href=\"https:\/\/rcworst.com\/collections\/grinder-pumps-1?_gl=1*l1iaea*_gcl_au*MTg4MzY5OTA2NC4xNzcwOTM3MjQ0LjEzNTQxOTU4NDguMTc3NTE1Nzk5MS4xNzc1MTU3OTkx*_ga*NjU2NzMyNDMuMTc3MDkzNzI0NA..*_ga_JGVP8VV3J2*czE3NzU3NDg4NzIkbzExNSRnMSR0MTc3NTc2MDc4MyRqMTIkbDAkaDA.\" target=\"_blank\"\u003eZoeller Grinder Pumps\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eZoeller Model E819 Grinder Pump Description\u003c\/h3\u003e\n\u003cp\u003eThis series of submersible pumps is designed for use in residential or commercial wastewater applications and can be used to transfer wastewater or unscreened raw sewage. Each pump features an innovative cutting mechanism allowing it to grind solids into fine particles. The uniform consistency of the discharged material lessens the risk of clogs in the pipe, yielding less down time and fewer service calls. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion, and are designed to provide great heat dissipation from the motor. As with every Zoeller® pump, each one is 100% factory tested to ensure quality and reliability for years of trouble-free performance!\u003c\/p\u003e\n\u003ch3\u003eZoeller Model E819 Grinder Pump Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDurable Heavy-Duty, Finned Cast Iron Construction\u003c\/li\u003e\n\u003cli\u003eLegs Provided for Free-Standing Installation\u003c\/li\u003e\n\u003cli\u003eOil-Filled, Hermetically Sealed Motor with Class B Insulation, Automatic Reset Thermal Overload Protected\u003c\/li\u003e\n\u003cli\u003eHardened Stainless Steel Cutter and Disc\u003c\/li\u003e\n\u003cli\u003eCutters Protected from Abrasive Solids\u003c\/li\u003e\n\u003cli\u003eStainless Steel Lifting Handle, Screws and Bolts\u003c\/li\u003e\n\u003cli\u003eEasily Adapts to Rail Systems\u003c\/li\u003e\n\u003cli\u003eMechanical Shaft Seal - Carbon\/Ceramic\u003c\/li\u003e\n\u003cli\u003eControl Panels not Required\u003c\/li\u003e\n\u003cli\u003eSimplex Grinder Package Systems (unassembled and job ready\/assembled) available\u003c\/li\u003e\n\u003cli\u003eCorrosion-Resistant, Powder Coated Epoxy Finish\u003c\/li\u003e\n\u003cli\u003eMaximum Operating Temperature: 130°F (54°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Features:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1¼” NPT Vertical Discharge\u003c\/li\u003e\n\u003cli\u003eCarbon\/Ceramic Seals\u003c\/li\u003e\n\u003cli\u003eThermal Overload Protection\u003c\/li\u003e\n\u003cli\u003eEngineered Plastic Impeller\u003c\/li\u003e\n\u003cli\u003eStainless Steel Cutter Plate\/Cutter\u003c\/li\u003e\n\u003cli\u003eStainless Steel Shaft\u003c\/li\u003e\n\u003cli\u003eStainless Steel Hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zoeller","offers":[{"title":"Default Title","offer_id":49328945004861,"sku":"ZLR819-0004","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/files\/820_nonauto_w_60794f25-7e67-4230-9ade-c0d8ec9f5d7e.jpg?v=1725481827"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/5552\/7485\/collections\/840_0004_rcw_w_cd0483c0-3f5c-4000-b0a4-08c678995d65.jpg?v=1727897422","url":"https:\/\/rcworst.com\/collections\/all-grinder-pumps.oembed","provider":"R.C. Worst \u0026 Company Inc","version":"1.0","type":"link"}