Prev Next

Barmesa HMV140-10-1-503 Vertical Multi-Stage Centrifugal Pump 5.5 HP

Price: $3,526.50
Quantity:
+ -
Usually ships within 2 days
SKU: BMS70120113A


Shipping Weight:
176.0 LBS
Shipping Dimensions
Length: 10 In
Width: 10 In
Height: 34 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Barmesa HMV Vertical Multi-Stage Centrifugal Pump

Our vertical multi-stage centrifugal pumps are driven by premium efficiency electric motors. The output shaft of the motor is directly connected with the pump shaft through a coupling. The pressure resistant cylinder and flow passage components are fixed between the pump head and the inlet and outlet section with clamping bolts. The inlet and outlet are located at the bottom of the pump in the same plane. This type of pump can be equipped with a smart protector to effectively prevent dry running, phase-loss and overload.

Barmesa HMV Vertical Multi-Stage Centrifugal Pump Applications

  • Water Supply - Water Filtration and Transport, Water Distribution, Net Pressure Increase for High-Rise Buildings and Industrial Water Pressure Boosting.
  • Industrial Boosting - Process Water System, Cleaning System, High Pressure Washing System, Fire Fighting System and Automobile Cleaning System.
  • Industrial Liquid Transportation - Refrigeration and Air Conditioning System, Boiler Feed System, Temperature System and Machine Adjustment.
  • Irrigation - Irrigation by Region, Sprinkler Irrigation and Drip Irrigation.
  • Delivery - Oil and Alcohol, Acid and Alkali and Ethylene, Glycol and Coolant.
  • Water Treatment - Ultrafiltration System, Reverse Osmosis System and Distillation System.

Barmesa HMV Vertical Multi-Stage Centrifugal Pump Features

  • PREMIUM EFFICIENCY MOTOR
    • 1 HP up to 75 HP
    • Totally Enclosed Fan-Cooled
    • Three Phase, 3500 RPM
    • 230/460 Volts, 60 Hz
    • IP55 Protection Class
    • Class F Insulation
  • OPERATING CONDITIONS
    • Thin, Clean, Non-Flammable and Non-Explosive Liquid, Free of Granules and Fibers
    • Liquid Temperature: Hot Water Type: 5 °F - 248 °F
    • Ambient Temperature up to 104 °F
    • Height Up to 3280.83 ft

Barmesa HMV140-10-1-503 Vertical Multi-Stage Centrifugal Pump Specifications

  • DISCHARGE SIZE: 2.5"
  • INLET SIZE: 2.5"
  • MAXIMUM CAPACITY: 210 GPM
  • MAXIMUM HEAD: 110'
  • IMPELLER MATERIAL: Stainless Steel
  • BODY CONSTRUCTION: Cast Iron
  • HORSEPOWER: 5.5 HP
  • MOTOR TYPE: (TEFC) Totally Enclosed Fan-Cooled
  • VOLTAGE: 230/460V
  • STAGES: 1
  • MAXIMUM LIQUID TEMPERATURE: 248°F

Barmesa HMV Vertical Multi-Stage Centrifugal Pump Performance Curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

BARMESA PUMPS FACTORY WARRANTY


Barmesa Pumps warrants that products of our manufacture will be free of defects in material and workmanship under normal use and service for 18 months from date of manufacture or 12 months from installation date whichever occurs first. This warranty gives you specific legal rights,which vary from state to state.

This warranty is a limited warranty, and no warranty related claims of any nature whatsoever shall be made against Barmesa Pumps, until the ultimate consumer or his/her successor notifies us inwriting of the defect and delivers the product and/or defective part(s) freight prepaid to our factory or nearest authorized service station as instructed by Barmesa Pumps. THERE SHALL BE NO FURTHER LIABILITY. WHETHER BASED ON WARRANTY. NEGLIGENCE OR OTHERWISE. PRODUCT SHALL BE EITHER REPLACED OR REPAIRED AT THE ELECTION OF BARMESA PUMPS. Guarantees relating to performance specifications provided in addition to the foregoing material and workmanship warranties on a product manufactured by Barmesa Pumps, if any, are subject to possible factory testing. Any additional guarantees, in the nature of certified performance specifications or time frame must be inwriting and such writing must be signed byour authorized factory manager at time of order placement and/or at time of quotation. Due to inaccuracies in field testing and should a conflict arises between the results of field testing conducted by or for the user, Barmesa Pumps reserves the right to have the product returned to our factory for additional testing.

This warranty shall not apply when damage is caused by (1) improper installation, (2) improper voltage, (3) lightning, (4) excessive sand or other abrasive material, (5) corrosion build-up due to excessive chemical content or (6) uncontrollable acts of god. Any modification of the original equipment will also void the warranty. We will not be responsible for loss, damage or labor cost due to interruption of service caused by defective pumps, parts or systems. Barmesa Pumps will not accept charges incurred by others without our prior written approval.

This warranty is void if our inspection reveals the product was used in a manner inconsistent with normal industry practice and/or our specific recommendations. The purchaser is responsible for communication of all necessary information regarding the application and use of the product. UNDER NO CIRCUMSTANCES WILL WE BE RESPONSIBLE FOR ANY OTHER DIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO TRAVEL EXPENSES, CONTRACTOR FEES, UNAUTHORIZED REPAIR SHOP EXPENSES, LOST PROFITS, LOST INCOME, LABOR CHARGES, DELAYS IN PRODUCTION, IDLE PRODUCTION, WHICH DAMAGES ARE CAUSED BY ANY DEFECTS IN MATERIAL AND/OR WORKMANSHIP AND/OR DAMAGE OR DELAYS IN SHIPMENT. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTY. No rights extended under this warranty shall be assigned to any other person, whether by operation of law or otherwise, without our prior written approval.

IMPORTANT!

If you have a claim under the provision of the warranty, contact Barmesa Pumps or your authorized Barmesa Pumps Distributor:

warranty@barmesapumps.com

www.barmesapumps .com

We've been helping customers since 1953

Trust Guard Security Scanned