Prev Next

Barmesa BES3040CU9 End-Suction Centrifugal Bearing Frame Mounted 3" x 4"

Price: $3,549.00
Quantity:
+ -
Usually ships within 3 weeks
SKU: BMS70010155


Shipping Weight:
167.0 LBS
Shipping Dimensions
Length: 23 In
Width: 15 In
Height: 13 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Barmesa End-Suction Centrifugal Bearing Frame Mounted Description

The BES Series End-Suction Frame Mounted Pumps by Barmesa Pumps exemplify engineering excellence with their versatile design, capable of handling a variety of motor sizes and operational speeds. This adaptability is crucial for meeting the fluid management requiremnts of different applications. The series is designed with longevity in mind, featuring a robust bearing housing that prolongs bearing life, a stainless steel shaft and impeller for durability and a cast iron body to withstand demanding conditions. When mounted on a solid frame it ensures consistent operation even under substantial radial and thrust loads, leading to dependable performance and lower maintenance expenses.

Barmesa End-Suction Centrifugal Bearing Frame Mounted Applications

  • Fluid Transfer
  • Water Supply
  • Fluid Circulation
  • HVAC Systems
  • Agriculture Applications
  • Industrial Applications
  • Commercial Applications

Barmesa End-Suction Centrifugal Bearing Frame Mounted Features

  • Liquid Temperatures from 180 °F (82 °C) - 225 °F (107 °C) to Continuous
  • 304 Stainless Steel Impeller, Enclosed Type, Dynamically Balanced
  • Stainless Steel Shaft with Bronze Shaft Sleeve
  • Durable Cast Iron ASTM A-48, Class 30, Back Pull-Out Design, with Removing Suction and Discharge Piping
  • Single Row, Ball, Grease Lubricated
  • Carbon/Ni-Resist/Buna-N Single, Mechanical, Water Lubrication
  • Easy Installation
  • Low Maintenance Costs

Barmesa BES3040CU9 End-Suction Centrifugal Bearing Frame Mounted Specifications

  • DISCHARGE SIZE: 3.0" 125lb. ANSI Flange
  • INLET SIZE: 4.0" 125lb. ANSI Flange
  • MAXIMUM CAPACITY: 940 GPM
  • MAXIMUM HEAD: 310'
  • IMPELLER MATERIAL: Bronze C95200 / Enclosed Type, Dynamically Balanced
  • BODY CONSTRUCTION: Cast Iron ASTM A-48, Class 30
  • MAXIMUM LIQUID TEMPERATURE: 225°F (107°C)

Barmesa End-Suction Centrifugal Bearing Frame Mounted Performance Curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

BARMESA PUMPS FACTORY WARRANTY


Barmesa Pumps warrants that products of our manufacture will be free of defects in material and workmanship under normal use and service for 18 months from date of manufacture or 12 months from installation date whichever occurs first. This warranty gives you specific legal rights,which vary from state to state.

This warranty is a limited warranty, and no warranty related claims of any nature whatsoever shall be made against Barmesa Pumps, until the ultimate consumer or his/her successor notifies us inwriting of the defect and delivers the product and/or defective part(s) freight prepaid to our factory or nearest authorized service station as instructed by Barmesa Pumps. THERE SHALL BE NO FURTHER LIABILITY. WHETHER BASED ON WARRANTY. NEGLIGENCE OR OTHERWISE. PRODUCT SHALL BE EITHER REPLACED OR REPAIRED AT THE ELECTION OF BARMESA PUMPS. Guarantees relating to performance specifications provided in addition to the foregoing material and workmanship warranties on a product manufactured by Barmesa Pumps, if any, are subject to possible factory testing. Any additional guarantees, in the nature of certified performance specifications or time frame must be inwriting and such writing must be signed byour authorized factory manager at time of order placement and/or at time of quotation. Due to inaccuracies in field testing and should a conflict arises between the results of field testing conducted by or for the user, Barmesa Pumps reserves the right to have the product returned to our factory for additional testing.

This warranty shall not apply when damage is caused by (1) improper installation, (2) improper voltage, (3) lightning, (4) excessive sand or other abrasive material, (5) corrosion build-up due to excessive chemical content or (6) uncontrollable acts of god. Any modification of the original equipment will also void the warranty. We will not be responsible for loss, damage or labor cost due to interruption of service caused by defective pumps, parts or systems. Barmesa Pumps will not accept charges incurred by others without our prior written approval.

This warranty is void if our inspection reveals the product was used in a manner inconsistent with normal industry practice and/or our specific recommendations. The purchaser is responsible for communication of all necessary information regarding the application and use of the product. UNDER NO CIRCUMSTANCES WILL WE BE RESPONSIBLE FOR ANY OTHER DIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO TRAVEL EXPENSES, CONTRACTOR FEES, UNAUTHORIZED REPAIR SHOP EXPENSES, LOST PROFITS, LOST INCOME, LABOR CHARGES, DELAYS IN PRODUCTION, IDLE PRODUCTION, WHICH DAMAGES ARE CAUSED BY ANY DEFECTS IN MATERIAL AND/OR WORKMANSHIP AND/OR DAMAGE OR DELAYS IN SHIPMENT. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTY. No rights extended under this warranty shall be assigned to any other person, whether by operation of law or otherwise, without our prior written approval.

IMPORTANT!

If you have a claim under the provision of the warranty, contact Barmesa Pumps or your authorized Barmesa Pumps Distributor:

warranty@barmesapumps.com

www.barmesapumps .com

We've been helping customers since 1953

Trust Guard Security Scanned