Prev Next

Barmesa ANSI Centrifugal Process Pumps 911S Series 1.5 x 3 - 6 AB

Price: $5,204.25
Quantity:
+ -
Usually ships within 2 days
SKU: BMS60340111


Shipping Weight:
42.0 LBS
Shipping Dimensions
Length: 18 In
Width: 7 In
Height: 12 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Barmesa ANSI Centrifugal Process Pumps

BARMESA process pump series 911 is a centrifugal pump with horizontal suction and vertical discharge, open impeller, which meets ANSI B73.1 requirements. It is made of the best materials and components, with continuous inspection, ensuring high quality.

Barmesa ANSI Centrifugal Process Pumps Applications

  • Automotive Industry
  • Food & Beverage Industry
  • Textile
  • Petrochemical
  • Pharmaceutical Industry
  • Chemical
  • Pulps & paper
  • General industry

Barmesa ANSI Centrifugal Process Pumps Features

  • Volute in Horizontal Suction and Vertical Discharge, Foot Design makes it Resistant to Slippage and the Distortion Due to Piping Loads. Packing is Fully Confined, the Standard Layout is Serrated Flanges with Flat Face, ASME/ANSI B16.5, for 150#, there are other Alternatives such as: 150#RF, 3400#FF and 300#RF
  • Impeller is Fully Open and Threaded to the Drive Shaft, Thread is Isolated from the Fluid Pumped by Teflon Ring
  • Seal Plate is Manufactured in Iron or Stainless Steel 316, Machined to Totally Seal with Volute Gaskets.
  • Adapter is made of Iron, with Machined Socket to Hold the Volute and the Seal Plate, having Holes to fit the Bearings Box.
  • Shaft is made of 4140 Steel and comes with Adjustable Bearing Set. This Shaft can also be Supplied in 316 Stainless and in this Case it Requires no Sleeve
  • Bearings Box is a Rigid Construction and Requires no Additional Machining, to make Lubrication Oil to Grease or Oil Mist, has a Sight Glass to Check the Oil Level, the Box is Sealed in INPRO Labyrinth Seal "VBX". This Bearing Box is made of Iron for Models 911M and 911L has Two Bearings Box Support Sizes; According to the Suction Lift the Support Size is Selected.
  • Bearings Support is made of Iron Material and Slot Holes for Lubrication with Oil, Grease and Oil Mist.
  • Outer Bearings is Located in the Bearing Support, it is a Two Angular Contact Ball and its Design is Suitable to Support Combined Load, Meaning Axial and Radial Loads Acting Simultaneously.
  • Bearing Interior is a Rigid Single Row of Bearings with a Simple Design, Suitable to Support Combined Load, meaning Axial and Radial Loads Acting Simultaneously.
  • Available Construction Material all Ductile Iron, Ductile Iron with 316 Stainless Steel Impeller and all 316 Stainless Steel

Barmesa ANSI Centrifugal Process Pumps Specifications

  • DISCHARGE SIZE: 1.5"
  • INLET SIZE: 3.0"
  • MAXIMUM CAPACITY: 267 GPM
  • MAXIMUM HEAD: 162'
  • IMPELLER MATERIAL: 316 Stainless Steel
  • BODY CONSTRUCTION: 316 Stainless Steel
  • PUMP SIZE: 1.5 x 3 - 6 AB
  • RPM: 1750 and 3500 RPM
  • MAXIMUM LIQUID TEMPERATURE: 350°F (177°C)

Barmesa ANSI Centrifugal Process Pumps Performance Curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

BARMESA PUMPS FACTORY WARRANTY


Barmesa Pumps warrants that products of our manufacture will be free of defects in material and workmanship under normal use and service for 18 months from date of manufacture or 12 months from installation date whichever occurs first. This warranty gives you specific legal rights,which vary from state to state.

This warranty is a limited warranty, and no warranty related claims of any nature whatsoever shall be made against Barmesa Pumps, until the ultimate consumer or his/her successor notifies us inwriting of the defect and delivers the product and/or defective part(s) freight prepaid to our factory or nearest authorized service station as instructed by Barmesa Pumps. THERE SHALL BE NO FURTHER LIABILITY. WHETHER BASED ON WARRANTY. NEGLIGENCE OR OTHERWISE. PRODUCT SHALL BE EITHER REPLACED OR REPAIRED AT THE ELECTION OF BARMESA PUMPS. Guarantees relating to performance specifications provided in addition to the foregoing material and workmanship warranties on a product manufactured by Barmesa Pumps, if any, are subject to possible factory testing. Any additional guarantees, in the nature of certified performance specifications or time frame must be inwriting and such writing must be signed byour authorized factory manager at time of order placement and/or at time of quotation. Due to inaccuracies in field testing and should a conflict arises between the results of field testing conducted by or for the user, Barmesa Pumps reserves the right to have the product returned to our factory for additional testing.

This warranty shall not apply when damage is caused by (1) improper installation, (2) improper voltage, (3) lightning, (4) excessive sand or other abrasive material, (5) corrosion build-up due to excessive chemical content or (6) uncontrollable acts of god. Any modification of the original equipment will also void the warranty. We will not be responsible for loss, damage or labor cost due to interruption of service caused by defective pumps, parts or systems. Barmesa Pumps will not accept charges incurred by others without our prior written approval.

This warranty is void if our inspection reveals the product was used in a manner inconsistent with normal industry practice and/or our specific recommendations. The purchaser is responsible for communication of all necessary information regarding the application and use of the product. UNDER NO CIRCUMSTANCES WILL WE BE RESPONSIBLE FOR ANY OTHER DIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO TRAVEL EXPENSES, CONTRACTOR FEES, UNAUTHORIZED REPAIR SHOP EXPENSES, LOST PROFITS, LOST INCOME, LABOR CHARGES, DELAYS IN PRODUCTION, IDLE PRODUCTION, WHICH DAMAGES ARE CAUSED BY ANY DEFECTS IN MATERIAL AND/OR WORKMANSHIP AND/OR DAMAGE OR DELAYS IN SHIPMENT. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTY. No rights extended under this warranty shall be assigned to any other person, whether by operation of law or otherwise, without our prior written approval.

IMPORTANT!

If you have a claim under the provision of the warranty, contact Barmesa Pumps or your authorized Barmesa Pumps Distributor:

warranty@barmesapumps.com

www.barmesapumps .com

We've been helping customers since 1953

Trust Guard Security Scanned