Prev Next
New!

Barmesa 2KLEIN-203 Submersible Stainless Dewatering Pump 2.0 HP 230V 3PH 32' Cord Manual

Price: $1,769.25
Quantity:
+ -
Usually ships within 2 days
SKU: BMS70090127


Shipping Weight:
55.0 LBS
Shipping Dimensions
Length: 10 In
Width: 10 In
Height: 19 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Barmesa Klein Series Submersible Stainless Dewatering Pump

Submersible stainless steel pump for dewatering. The Klein Series pumps are constructed with AISI 304 stainless steel, making these pumps highly resistant to abrasive liquids and light chemicals. All KLEIN series models offer efficient cooling for continuous duty. The compact and lightweight design make these pumps an excellent fit for dewatering applications such as site drainage, mining, tunneling, public works, floods, portable utility and more.

  • High Resistance to Abrasive Liquids
  • Lost-Wax Casting AISI 304
  • Compact & Lightweight Design
  • Efficient Circumferential Cooling for Continuous Duty

Barmesa Klein Series Submersible Stainless Dewatering Pump Features

  • Dry Type Submersible Motor in 1 & 3 Phase. Insulation Class B and IP68 Protection Class.
  • 304 AISI Stainless Steel Motor Housing
  • Dual Mechanical, Oil Filled Chamber Seal
  • Seal is Upper Part is Carbon-Ceramic and Lower Part is Silicon Carbide. Stainless Steel Hardware
  • Impeller is made of 304 AISI Stainless Steel, 8- Vane, Semi-Open
  • 2.0" NPT Female, Vertical Bolt on Flange. Lost Wax Casting 304 AISI Stainless Steel
  • Temperature Rating: 104°F (40°C)

Barmesa 2KLEIN-203 Submersible Stainless Dewatering Pump Specifications

  • VOLTAGE: 3ø, 230V, 60Hz
  • HORSEPOWER: 2.0 HP
  • AMP DRAW (full load): 8
  • MOTOR TYPE: Dry Type Submersible Motor
  • RPM: 3450
  • MAXIMUM HEAD: 67'
  • MAXIMUM CAPACITY: 139 GPM
  • SWITCH TYPE: Manual
  • DISCHARGE PIPE SIZE: 2.0"
  • MAXIMUM SOLIDS HANDLING SIZE: 0.23"
  • IMPELLER TYPE: 304 AISI Stainless Steel, 8 Vane, Semi-Open
  • CORD LENGTH: 32' Type Neoprene Cord
  • BODY CONSTRUCTION: 304 AISI Stainless Steel
  • MAXIMUM LIQUID TEMPERATURE: 104°F (40°C)

Barmesa Klein Series Submersible Stainless Dewatering Pump Performance Curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

BARMESA PUMPS FACTORY WARRANTY


Barmesa Pumps warrants that products of our manufacture will be free of defects in material and workmanship under normal use and service for 18 months from date of manufacture or 12 months from installation date whichever occurs first. This warranty gives you specific legal rights,which vary from state to state.

This warranty is a limited warranty, and no warranty related claims of any nature whatsoever shall be made against Barmesa Pumps, until the ultimate consumer or his/her successor notifies us inwriting of the defect and delivers the product and/or defective part(s) freight prepaid to our factory or nearest authorized service station as instructed by Barmesa Pumps. THERE SHALL BE NO FURTHER LIABILITY. WHETHER BASED ON WARRANTY. NEGLIGENCE OR OTHERWISE. PRODUCT SHALL BE EITHER REPLACED OR REPAIRED AT THE ELECTION OF BARMESA PUMPS. Guarantees relating to performance specifications provided in addition to the foregoing material and workmanship warranties on a product manufactured by Barmesa Pumps, if any, are subject to possible factory testing. Any additional guarantees, in the nature of certified performance specifications or time frame must be inwriting and such writing must be signed byour authorized factory manager at time of order placement and/or at time of quotation. Due to inaccuracies in field testing and should a conflict arises between the results of field testing conducted by or for the user, Barmesa Pumps reserves the right to have the product returned to our factory for additional testing.

This warranty shall not apply when damage is caused by (1) improper installation, (2) improper voltage, (3) lightning, (4) excessive sand or other abrasive material, (5) corrosion build-up due to excessive chemical content or (6) uncontrollable acts of god. Any modification of the original equipment will also void the warranty. We will not be responsible for loss, damage or labor cost due to interruption of service caused by defective pumps, parts or systems. Barmesa Pumps will not accept charges incurred by others without our prior written approval.

This warranty is void if our inspection reveals the product was used in a manner inconsistent with normal industry practice and/or our specific recommendations. The purchaser is responsible for communication of all necessary information regarding the application and use of the product. UNDER NO CIRCUMSTANCES WILL WE BE RESPONSIBLE FOR ANY OTHER DIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO TRAVEL EXPENSES, CONTRACTOR FEES, UNAUTHORIZED REPAIR SHOP EXPENSES, LOST PROFITS, LOST INCOME, LABOR CHARGES, DELAYS IN PRODUCTION, IDLE PRODUCTION, WHICH DAMAGES ARE CAUSED BY ANY DEFECTS IN MATERIAL AND/OR WORKMANSHIP AND/OR DAMAGE OR DELAYS IN SHIPMENT. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTY. No rights extended under this warranty shall be assigned to any other person, whether by operation of law or otherwise, without our prior written approval.

IMPORTANT!

If you have a claim under the provision of the warranty, contact Barmesa Pumps or your authorized Barmesa Pumps Distributor:

warranty@barmesapumps.com

www.barmesapumps .com

We've been helping customers since 1953

Trust Guard Security Scanned