Zoeller Model G841 Grinder Pump Description
The Shark® series of submersible grinder pumps is designed for use in
residential or commercial wastewater applications and can be used to transfer
raw sewage. Each pump features an innovative cutting mechanism, allowing it
to grind solids into fine particles. When used in conjunction with a properly
equipped control panel, the Model 840 utilizes an automatic reversing cutter,
which doubles the service life of a single-direction grinder and prevents
clogging. The uniform consistency of the discharged material reduces the risk of
clogs in the pipe, yielding less down time and fewer service calls. These durable
cast iron pumps include a powder coated epoxy finish to prevent corrosion, and
are designed to provide great heat dissipation from the motor, ensuring a long
service life. As with every Zoeller® pump, each one is 100% pressure-tested,
submerged and run to ensure quality and reliability for years of trouble-free
performance! This attention to detail is an inherent feature of every pump in this
series, making it one of the most reliable in the industry.
Zoeller Model G841 Grinder Pump Features and Benefits
- Finned, Class 30 Cast Iron Construction
- Corrosion-Resistant, Powder Coated Epoxy Finish
- 1-1/4" NPT Discharge
- Hardened Stainless Steel Cutter and Disc, Rockwell C55-60
- Cutters Protected from Abrasive Solids
- Bronze Vortex Impeller
- Stainless Steel Screws, Bolts and Lifting Bail
- Easily Adapts to Many Existing Competitors’ Rail Systems
- Dual Mechanical Seals with Leak Detection
- Legs Provide for Free Standing Installation
- Pre-Assembled Systems Available
Zoeller 841-0008 Grinder Pump Specifications
- VOLTAGE: 3ø, 460V, 60Hz
- HORSEPOWER: 2.0 HP
- AMP DRAW (full load): 5.5
- MOTOR TYPE: 3 Phase
- RPM: 3450
- MAXIMUM HEAD: 125'
- MAXIMUM CAPACITY: 61 GPM
- SWITCH TYPE: Manual
- DISCHARGE PIPE SIZE: 1-1/4" NPT Vertical
- IMPELLER TYPE: Ductile Iron, Non-Clogging Vortex
- CORD LENGTH: 20' Type SOW or SOOW Multi-Wire Neoprene
- BODY CONSTRUCTION: Cast Iron
- MAXIMUM LIQUID TEMPERATURE: 130°F (54C)
Zoeller Model G841 Performance Curve
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Zoeller Limited Warranty
Manufacturer warrants, to the purchaser and subsequent owner during the warranty
period, every new product to be free from defects in material and workmanship
under normal use and service, when properly used and maintained, for a period
of one year from date of purchase by the end user, or 18 months from date of
original manufacture of the product, whichever comes first. Parts that fail within
the warranty period, one year from date of purchase by the end user, or 18 months
from the date of original manufacture of the product, whichever comes first, that
inspections determine to be defective in material or workmanship, will be repaired,
replaced or remanufactured at Manufacturer's option, provided however, that by so
doing we will not be obligated to replace an entire assembly, the entire mechanism
or the complete unit. No allowance will be made for shipping charges, damages,
labor or other charges that may occur due to product failure, repair or replacement.
This warranty does not apply to and there shall be no warranty for any material
or product that has been disassembled without prior approval of Manufacturer,
subjected to misuse, misapplication, neglect, alteration, accident or act of God; that
has not been installed, operated or maintained in accordance with Manufacturer's
installation instructions; that has been exposed to outside substances including
but not limited to the following: sand, gravel, cement, mud, tar, hydrocarbons,
hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive
substances, wash towels or feminine sanitary products, etc. in all pumping
applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or
other person to assume for us any other liability in connection with our products.
Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211,
Attention: Customer Service Department to obtain any needed repair or replacement
of part(s) or additional information pertaining to our warranty.
MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL,
CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED
OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR
A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED
TO THE DURATION OF THE EXPRESSED WARRANTY.
Some states do not allow limitations on the duration of an implied warranty, so
the above limitation may not apply to you. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.