Discontinued
Zoeller Model WD819 Grinder Pump Description
This series of submersible pumps is designed for use in residential or
commercial wastewater applications and can be used to transfer wastewater or
unscreened raw sewage. Each pump features an innovative cutting mechanism
allowing it to grind solids into fine particles. The uniform consistency of the
discharged material lessens the risk of clogs in the pipe, yielding less down time
and fewer service calls. These durable cast iron pumps include a powder coated
epoxy finish to prevent corrosion, and are designed to provide great heat
dissipation from the motor. As with every Zoeller® pump, each one is 100%
factory tested to ensure quality and reliability for years of trouble-free
performance!
Zoeller Model WD819 Grinder Pump Features and Benefits
- Automatic Model with Integral Control
- Durable Heavy-Futy, Finned Cast Iron Construction
- Legs Provided for Free-Standing Installation
- Oil-Filled, Hermetically Sealed Motor with Class B Insulation,
Automatic Reset Thermal Overload Protected
- Hardened Stainless Steel Cutter and Disc
- Cutters Protected from Abrasive Solids
- Stainless Steel Lifting Handle, Screws and Bolts
- Easily Adapts to Rail Systems
- Mechanical Shaft Seal - Carbon/Ceramic
- Control Panels not Required
- Simplex Grinder Package Systems (unassembled and job ready/assembled) available
- Corrosion-Resistant, Powder Coated Epoxy Finish
- Maximum Operating Temperature: 130°F (54°C)
Standard Features:
- 1¼” NPT Vertical Discharge
- Carbon/Ceramic Seals
- Thermal Overload Protection
- Engineered Plastic Impeller
- Stainless Steel Cutter Plate/Cutter
- Stainless Steel Shaft
- Stainless Steel Hardware
Zoeller 819-0006 Grinder Pump Specifications
- VOLTAGE: 1ø, 230V, 60Hz
- HORSEPOWER: 1.5 HP
- AMP DRAW (full load): 10.8
- MOTOR TYPE: Capacitor Start / Capacitor Run
- RPM: 3450
- MAXIMUM HEAD: 81'
- MAXIMUM CAPACITY: 43 GPM
- SWITCH TYPE: Variable Level Float Switch
- DISCHARGE PIPE SIZE: 1-1/4" NPT
- IMPELLER TYPE: Engineered Plastic with Stainless Steel Insert, Vortex
- CORD LENGTH: 20' Type SOW or SOOW Multi-Wire Neoprene
- BODY CONSTRUCTION: Cast Iron
- MAXIMUM LIQUID TEMPERATURE: 130°F (54C)
Zoeller Model WH819 Performance Curve
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Zoeller Limited Warranty
Manufacturer warrants, to the purchaser and subsequent owner during the warranty
period, every new product to be free from defects in material and workmanship
under normal use and service, when properly used and maintained, for a period
of one year from date of purchase by the end user, or 18 months from date of
original manufacture of the product, whichever comes first. Parts that fail within
the warranty period, one year from date of purchase by the end user, or 18 months
from the date of original manufacture of the product, whichever comes first, that
inspections determine to be defective in material or workmanship, will be repaired,
replaced or remanufactured at Manufacturer's option, provided however, that by so
doing we will not be obligated to replace an entire assembly, the entire mechanism
or the complete unit. No allowance will be made for shipping charges, damages,
labor or other charges that may occur due to product failure, repair or replacement.
This warranty does not apply to and there shall be no warranty for any material
or product that has been disassembled without prior approval of Manufacturer,
subjected to misuse, misapplication, neglect, alteration, accident or act of God; that
has not been installed, operated or maintained in accordance with Manufacturer's
installation instructions; that has been exposed to outside substances including
but not limited to the following: sand, gravel, cement, mud, tar, hydrocarbons,
hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive
substances, wash towels or feminine sanitary products, etc. in all pumping
applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or
other person to assume for us any other liability in connection with our products.
Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211,
Attention: Customer Service Department to obtain any needed repair or replacement
of part(s) or additional information pertaining to our warranty.
MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL,
CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED
OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR
A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED
TO THE DURATION OF THE EXPRESSED WARRANTY.
Some states do not allow limitations on the duration of an implied warranty, so
the above limitation may not apply to you. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.