Zoeller F641 Series Sewage & Dewatering Pump Description
The "Sewage-Waste" series of submersible pumps is designed for use in
commercial dewatering and wastewater applications and can be used to
transfer wastewater or unscreened raw sewage. The semi-open reversing
impeller design reduces the risk of clogging and allows each pump to pass a
2½" (63mm) spherical solid. These durable cast iron pumps include a
powder coated epoxy finish to prevent corrosion, and are designed to
provide great heat dissipation from the motor, ensuring a long service
life. As with every Zoeller pump, each one is 100% pressure-tested,
submerged and run to ensure quality and reliability for years of
trouble-free performance! This attention to detail is an inherent feture in
every pump of this series, making it one of the most reliable in the
industry.
Zoeller F641 Series Sewage & Dewatering Pump Features and Benefits
- Class 30 Cast Iron Construction
- All Units are Double Seal for Extra Motor Protection
- Corrosion Resistant Powder Coated Epoxy Finish
- Stainless Steel Screws, Washers, Tag and Seal Assembly
- Oil Filled, Hermetically Sealed Motor with Heavy Duty Finned Motor
Housing for Added Heat Dissipation
- Continuous Duty Operation in Submerged Conditions
- Maximum Temperature for Sewage or Dewatering: 104°F (40°C)
with 1.2 Service Factor
- 416 Stainless Steel Motor Shaft
- Stainless Steel Fitted Tandem Shaft Seals, Carbon Ceramic Seal Faces
- 4” Horizontal Flanged Discharge
- Control Panels with Overload Protection Available
- Non-Automatic for Variable Level Control Systems
Zoeller 641-0009 Sewage & Dewatering Pump Specifications
- VOLTAGE: 3ø, 230V, 60Hz
- HORSEPOWER: 3.0 HP
- AMP DRAW (full load): 9.6
- MOTOR TYPE: 3 Phase
- RPM: 1750
- MAXIMUM HEAD: 43'
- MAXIMUM CAPACITY: 460 GPM
- SWITCH TYPE: Manual
- DISCHARGE PIPE SIZE: 4" Horizontal Flange Discharge
- MAXIMUM SOLIDS HANDLING SIZE: 2-1/2" Spherical Solid
- IMPELLER TYPE: Ductile Iron, Semi-Open
- CORD LENGTH: 25' Type UL Listed, 3-Wire Cord
- BODY CONSTRUCTION: Cast Iron
- MAXIMUM LIQUID TEMPERATURE: 104°F (40C)
- DUTY RATING: Continuous
Zoeller Model F641 Performance Curve
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Zoeller Limited Warranty
Manufacturer warrants, to the purchaser and subsequent owner during the warranty
period, every new product to be free from defects in material and workmanship
under normal use and service, when properly used and maintained, for a period
of one year from date of purchase by the end user, or 18 months from date of
original manufacture of the product, whichever comes first. Parts that fail within
the warranty period, one year from date of purchase by the end user, or 18 months
from the date of original manufacture of the product, whichever comes first, that
inspections determine to be defective in material or workmanship, will be repaired,
replaced or remanufactured at Manufacturer's option, provided however, that by so
doing we will not be obligated to replace an entire assembly, the entire mechanism
or the complete unit. No allowance will be made for shipping charges, damages,
labor or other charges that may occur due to product failure, repair or replacement.
This warranty does not apply to and there shall be no warranty for any material
or product that has been disassembled without prior approval of Manufacturer,
subjected to misuse, misapplication, neglect, alteration, accident or act of God; that
has not been installed, operated or maintained in accordance with Manufacturer's
installation instructions; that has been exposed to outside substances including
but not limited to the following: sand, gravel, cement, mud, tar, hydrocarbons,
hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive
substances, wash towels or feminine sanitary products, etc. in all pumping
applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or
other person to assume for us any other liability in connection with our products.
Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211,
Attention: Customer Service Department to obtain any needed repair or replacement
of part(s) or additional information pertaining to our warranty.
MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL,
CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED
OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR
A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED
TO THE DURATION OF THE EXPRESSED WARRANTY.
Some states do not allow limitations on the duration of an implied warranty, so
the above limitation may not apply to you. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.