Prev Next

Zoeller 268-0022 Model J268 Sewage Effluent or Dewatering Pump 0.5 HP 200V 3PH 15' Cord Nonautomatic

Price: Discontinued
+ -
Discontinued or no longer available.
SKU: ZLR268-0022


Shipping Weight:
52.0 LBS
Shipping Dimensions
Length: 13 In
Width: 12 In
Height: 14 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

zoeller-logo.jpg

Zoeller Model J268 Submersible Pump Description

The "Waste-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering and wastewater applications and can be used to transfer groundwater, effluent or raw sewage. The innovative vortex impeller design reduces the risk of clogging and allows each pump to pass 2" (50 mm) spherical solids. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance!

Zoeller Model J268 Submersible Pump Features and Benefits

  • Durable Cast Construction, ASTM Class 25 Cast Iron, Switch Case and Pump Housing
  • Cast Iron Base
  • Not Affected by Materials Normally Found in Drainage and Sewage Pumps
  • Stainless Steel Screws, Bolts, Handle, Guard and Arm and Seal Assembly
  • Oil Filled, Hermetically Sealed Motor
  • 2” Female and 3" NPT Male Discharge
  • Corrosion-Resistant, Powder Coated Epoxy Finish

Zoeller Model J268 Submersible Pump Specifications

  • VOLTAGE: 3ø, 200V, 60Hz
  • HORSEPOWER: 0.5 HP
  • AMPS: 5.5
  • MOTOR TYPE: 3 Phase
  • RPM: 1725 RPM
  • MAX HEAD: 21.5'
  • MAX FLOW RATE: 128 GPM
  • SWITCH 'ON' LEVEL: 12"
  • SWITCH 'OFF' LEVEL: 4"
  • DISCHARGE SIZE: 2" NPT Vertical Discharge
  • SOLIDS HANDLING: 2" Spherical Solid
  • IMPELLER TYPE: Engineered Plastic w/ Metal Insert, Non-Clogging Vortex
  • CORD LENGTH: 15'
  • CORD TYPE: UL Listed Neoprene Cord and Plug
  • BODY CONSTRUCTION: Cast Iron
  • MAXIMUM OPERATING TEMPERATURE: 130°F (54C)

Zoeller Model J268 Performance Curve

performance-curve-266-267-268.jpg


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Zoeller Limited Warranty

Manufacturer warrants, to the purchaser and subsequent owner during the warranty period, every new product to be free from defects in material and workmanship under normal use and service, when properly used and maintained, for a period of three years from the date of purchase. Proof of purchase is required. Parts that fail within the warranty period, that inspections determine to be defective in material or workmanship, will be repaired, replaced or remanufactured at Manufacturer's option, provided however, that by so doing we will not be obligated to replace an entire assembly, the entire mechanism or the complete unit. No allowance will be made for shipping charges, damages, labor or other charges that may occur due to product failure, repair or replacement.

This warranty does not apply to and there shall be no warranty for any material or product that has been disassembled without prior approval of Manufacturer, subjected to misuse, misapplication, neglect, alteration, accident or act of nature; that has not been installed, operated or maintained in accordance with Manufacturer's installation instructions; that has been exposed to outside substances including but not limited to the following: sand, gravel, cement, mud, tar, hydrocarbons, hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive substances, wash towels or feminine sanitary products, etc. in all pumping applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or other person to assume for us any other liability in connection with our products.

Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211, Attention: Customer Service Department to obtain any needed repair or replacement of part(s) or additional information pertaining to our warranty.

MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THE EXPRESSED WARRANTY.

Some states do not allow limitations on the duration of an implied warranty, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

We've been helping customers since 1953

Trust Guard Security Scanned