Zoeller Model 212 Sewage Pump Description
Our Model 212 Sewage Pump is designed to remove raw sewage in residential sewage ejector applications. The 115 Volt, 1/2 HP Model 212 is the ideal size for use in small or average sized homes. Being compact, lightweight and economical allows it to be installed in minutes followed by years of reliable service.
Each Model 212 pump's motor housing is constructed with cast iron and filled with oil to efficiently dissipate heat. The impeller's smooth surface and clearance in the pump housing allows solids to pass freely through the pump. The float guard prevents material from accumulating on the float allowing the pump to operate as expected when called upon. In addition, the Model 212 pump is assembled with stainless steel hardware that will withstand any residential sewage application.
Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of -box.
Zoeller Model 212 Sewage Pump Features and Benefits
- Oil-Filled Motor and Cast Iron Motor Housing for Optimal Heat Dissipation which Prevents the Pump from Overheating
- Automatic Pump with a Time-Tested, Reliable, Preset, Built-In Snap Action Switch that Makes for Easy Installation
- Corrosion Resistant Engineered Plastic Vortex Impeller to Allow Free Passage of Solids which Prevents Clogging and Lessens Downtime
- Engineered Plastic Float Guard that Prevents Material or Debris from Collecting on the Float Ensuring Proper Operation Every Time
- Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Residential Sump Applications
- Stainless Steel Screws and Cord Mounting Hardware are Rust Resistant Ensuring the Pump can be Relied Upon for Years of Service
- 100 % Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected when You Recieve it.
- 2-Year Limited Warranty: This Model Comes With Warranty Coverage from Zoeller Pump Company, Giving you Extra Protection and More Peace of Mind
Zoeller 212-0001 Sewage Pump Specifications
- VOLTAGE: 1ø, 115V, 60Hz
- HORSEPOWER: 0.5 HP
- AMP DRAW (full load): 6.6
- MOTOR TYPE: Permanent Split Capacitor (PSC)
- RPM: 3400 RPM
- MAXIMUM HEAD: 19.5'
- MAXIMUM CAPACITY: 82 GPM
- SWITCH TYPE: Automatic
- SWITCH 'ON' LEVEL: 11-1/2"
- SWITCH 'OFF' LEVEL: 5-1/4"
- DISCHARGE PIPE SIZE: 2" NPT Vertical
- MAXIMUM SOLIDS HANDLING: 2" Spherical Solid
- IMPELLER TYPE: Engineered Plastic, Non-Clogging Vortex
- CORD LENGTH: 10' Type UL Listed, 3-Prong Plug
- BODY CONSTRUCTION: Engineered Plastic
- MAXIMUM OPERATING TEMPERATURE: 104°F (40C)
Zoeller Model 212 Sewage Pump Performance Curve
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Zoeller Limited Warranty
Zoeller products often carry warranty terms that vary in length based on the product type. Refer to the installation manual for specific warranty term.
Manufacturer warrants,to the purchaser and subsequent owner during the warranty
period, every new product to be free from defects in material and workmanship
under normal use and service, when properly used and maintained, for a period
of one year from date of purchase. Proof of purchase is required. Parts that fail
within the warranty period that inspections determine to be defective in material
or workmanship will be repaired, replaced or remanufactured at Manufacturer's
option, provided however, that by so doing we will not be obligated to replace
an entire assembly, the entire mechanism or the complete unit. No allowance
will be made for shipping charges, damages, labor or other charges that may
occur due to product failure, repair or replacement.
This warranty does not apply to and there shall be no warranty for any material
or product that has been disassembled without prior approval of Manufacturer,
subjected to misuse, misapplication, neglect, alteration, accident or uncontrollable
act of nature; that has not been installed, operated or maintained in accordance
with Manufacturer's installation instructions; that has been exposed to outside
substances including but not limited to the following: sand, gravel, cement,mud,
tar, hydrocarbons, hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other
abrasive or corrosive substances, wash towels or feminine sanitary products,
etc. in all pumping applications. The warranty set out in the paragraph above is
in lieu of all other warranties expressed or implied; and we do not authorize any
representative or other person to assume for us any other liability in connection with our products.
Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211,
Attention: Customer Support Department to obtain any needed repair or
replacement of part(s) or additional information pertaining to our warranty.
MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL,
CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED
OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR
A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED
TO THE DURATION OF THE EXPRESSED WARRANTY.
Some states do not allow limitations on the duration of an implied warranty, so
the above limitationmay not apply to you. Some states do not allowthe exclusion
or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.