Zoeller Model NX163 Explosion Proof High Head Effluent Pump Description
This series of submersible pumps is designed for use in residential or
commercial dewatering and effluent applications in Class I, Division 1,
Group C and D environments. Each pump is FM/CSA approved and features
innovative motor and electrical enclosures that are designed to reduce the
risk of vapor ignition both inside and outside the pump. Should vapors
inside the electrical enclosures become ignited, the enclosures are
engineered to contain the event and prevent escalation. Each pump is
constructed of hardware that will allow it to operate safely and
efficiently in extreme conditions. As with every Zoeller pump, each one is
100% factory tested to ensure quality and reliability for years of
trouble-free performance!
Zoeller Model NX163 Explosion Proof High Head Effluent Pump Features and Benefits
- cCSAus Rated Class I, Division 1, Groups C & D and Class Zone 1, Groups IIA & IIB Construction
- Tested to FM Standards 3600 and 3615 by CSA
- WARNING: Not for use in Acidic, Methanol, or Ethyl Acetate Atmospheres
- Non-Clogging Vortex Impeller Design, Bronze Class 88-8-0-4
- Stainless Steel Rotor Shaft
- Durable Cast Construction: Cast Iron Cover, Motor Adapter and Pump Housing All Cast Iron Class 30, 30000# Tensile Strength
- 20' (6 m), UL Listed, 5-Wire (1PH) or 8-Wire (3PH) Neoprene Cord. Extra Cord Lengths Available in 25', 35' and 50' (8, 11 and 15 m) Sensor Leads and Power Leads in One Cord for Easy Installation
- Stainless Steel Plate, Bolts, Handle, Guard and Float Rod Guide, Switch Arm and Actuator Assembly
- Threaded Conduit Connection for Protecting Cords in Extra Heavy-Duty Applications: 1-1/2" NPT
- Moisture Sensors Prewired in Motor Housing (functionality requires indicator in panel)
- Zoeller Control Panel with Intrinsically-Safe Relays and Moisture Indicator is Required with Nonautomatic Units (Simplex panel 10-1218 and Duplex panel 10-1224)
- Motor - 3450 RPM, Oil Filled, Hermetically Sealed, Automatic Reset Thermal Overload Protected (3 Phase requires circuit in control panel)
- Maximum Temperature for Effluent or Dewatering: 104°F (40°C)
- All Models Pass 3/4" (19 mm) Spherical Solids
- 1 ½” NPT Discharge Standard 2” NPT FLANGE KIT or 3” NPT FLANGE KIT Available
- Corrosion-Resistant, Powder Coated Epoxy Finish with Stainless Steel Screws and Handle
Zoeller 163-0049 Explosion Proof High Head Effluent Pump Specifications
- VOLTAGE: 1ø, 115V, 60Hz
- HORSEPOWER: 0.5 HP
- AMP DRAW (full load): 15.0
- MOTOR TYPE: Permanent Split Capacitor (PSC)
- RPM: 3450
- MAXIMUM HEAD: 66'
- MAXIMUM CAPACITY: 62 GPM
- SWITCH TYPE: Manual
- DISCHARGE PIPE SIZE: 1-1/2" NPT
- MAXIMUM SOLIDS HANDLING: 3/4" Spherical Solid
- IMPELLER TYPE: Bronze, Non-Clogging Vortex
- CORD LENGTH: 20' Type UL listed 5-wire SOOW Cord
- BODY CONSTRUCTION: Cast Iron
- MAXIMUM OPERATING TEMPERATURE: 104°F (40C)
- HAZARDOUS DUTY: Class I, Division 1, Groups C & D and Class Zone 1, Groups IIA & IIB Construction
Zoeller Model NX163 Performance Curve
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Zoeller Limited Warranty
Manufacturer warrants, to the purchaser and subsequent owner during the warranty
period, every new product to be free from defects in material and workmanship
under normal use and service, when properly used and maintained, for a period
of one year from date of purchase by the end user, or 18 months from date of
original manufacture of the product, whichever comes first. Parts that fail within
the warranty period, one year from date of purchase by the end user, or 18 months
from the date of original manufacture of the product, whichever comes first, that
inspections determine to be defective in material or workmanship, will be repaired,
replaced or remanufactured at Manufacturer's option, provided however, that by so
doing we will not be obligated to replace an entire assembly, the entire mechanism
or the complete unit. No allowance will be made for shipping charges, damages,
labor or other charges that may occur due to product failure, repair or replacement.
This warranty does not apply to and there shall be no warranty for any material
or product that has been disassembled without prior approval of Manufacturer,
subjected to misuse, misapplication, neglect, alteration, accident or act of God; that
has not been installed, operated or maintained in accordance with Manufacturer's
installation instructions; that has been exposed to outside substances including
but not limited to the following: sand, gravel, cement, mud, tar, hydrocarbons,
hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive
substances, wash towels or feminine sanitary products, etc. in all pumping
applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or
other person to assume for us any other liability in connection with our products.
Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211,
Attention: Customer Service Department to obtain any needed repair or replacement
of part(s) or additional information pertaining to our warranty.
MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL,
CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED
OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR
A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED
TO THE DURATION OF THE EXPRESSED WARRANTY.
Some states do not allow limitations on the duration of an implied warranty, so
the above limitation may not apply to you. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.