Zoeller 102-0011 Model WM266 Qwik Jon 102 Pump System w/PSF 0.5 HP 115V

Discontinued

Zoeller Qwik Jon Sewage Removal System Description

Economical sewage system desinged for freestanding or built in installation. Install a Qwik Jon Ultima just about anywhere. Perfect for basements, cabins, workshops, garages, additions, pool houses, etc.

Zoeller Qwik Jon Sewage Removal System Features and Benefits

Models:

• Model 100 UL Listed 264 pump
• Model 101 Preassembled cCSAus Listed 211 pump
• Model 102 UL Listed 266 pump
• Patent No. 5,038,418

Typical Installation:

• Versatile installation enables the pump compartment and piping to be concealed by the installation of a wall
• Note: Access must be maintained to the pump compartment
• Note: The Qwik Jon® is designed to fit flush with any elevated floor make of standard 2" x 6" (5 x 15cm) material (actual dimensions 1-1/2" x 5-1/2" [3.8 x 14.0 cm])
• Add a lavatory, bathtub, or shower with the installation of the 2" (50mm) adapt-a-flex seal (provided)
• Tub or shower requires built in installation. See installation instructions FM1469.
• Designed to accommodate a toilet, lavatory and bathtub
• Use with a variety of toilet styles (1.6 gallon [7.3 L] residential flush)
• Perfect for basements, family rooms, warehouse, factories, room additions, etc.
• No need to destroy concrete floors
• Reduces construction costs
• Pumps any direction
• Fits just about anywhere
• Toilet, fixtures and piping not included

Qwik Jon® system includes:

• Model 100
  • Pump: model WM264
  • .4 HP, 115 V, 9.4 Amps
  • PSC motor
  • UL listed
• Model 101 (preassembled)
  • Pump: model WM211
  • .4 HP, 115 V, 5.5 Amps
  • PSC motor
  • cCSAus certified
• Model 102
  • Pump: model WM266
  • 1/2 HP, 115V, 10.4 Amps
  • Split phase motor
  • CSA and UL listed

Note: Sewage pumps WM264, WM211 and WM266 are designed for use in Qwik Jon® units only. They are not designed for use in any other application.

• Automatic level control switch
• Thermal overload protected motor
• Stainless steel screws, bolts and handle
• Non-clogging vortex impeller
• Passes 2" (50mm) spherical solids
• UL listed, 3-wire neoprene 10 ft. cord and plug
• Maximum temperature models 100 and 102: 130°F (54°C)
• Maximum temperature model 101: 110°F (43°C)

Tank (model 100, 101, 102 patented) features:

• Durable polyethylene tank
• Light gray finish
• Lightweight: 27 lbs (12Kg)

2” (50mm) back-flow device and union:

• 2” (50mm) back-flow device (check local codes) required to prevent back flow of water and sewer gas
• No threading of pipe required
• Fits ABS, PVC and steel pipe
• Weight: 2 lbs. (0.9Kg)

All in one carton:

• Tank, lid and gasket
• 0.4 or ½ HP sewage pump
• Back-flow device (check local codes)
• 2” discharge and 3” (76mm) vent with adapt-a-flex seals
• 2” (50mm) adapt-a-flex seal for additional fixtures
• Floor flange extender kit for ½” (12.7mm) and 5/8” (15.9mm) thick floors
• Hardware pack
• Installation instructions
• 100 system shipping weight: 94 lbs (43Kg)
• 101 (preassembled) system shipping weight: 67lbs (30Kg)
• 102 system weight: 96 lbs (44Kg)

Items needed by installer:

• Supply fittings and waste pipe
• Toilet fixture
• Electrical source with ground fault interrupter protected receptacle
• Water source
• Tools

Zoeller Qwik Jon Sewage Removal Pump System Performance Curve

Zoeller Qwik Jon Sewage System Product Resources

Download Zoeller Catalog Sheet Qwik Jon 100, 101, 102 FM0692

Download Zoeller Qwik Jon Installation Instructions 100, 101, 102 FM1469

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Warranty Information