Zoeller Simplex Control Panel Description
The control panel can be housed in a NEMA 4X enclosure and be of a simplex
design which controls a single pump from a 3-float system. For Models 841
& 842, Single Directional only. The panel contains the required
starting, control, & alarm circuits. Rated motor starters and circuit
breakers are required for each pump. The 115 volt control circuit will have
short circuit protection. The panel will have pump run pilot light(s) and
pump & alarm selector switches. The panel will be equipped with
circuit(s) which automatically reverses the direction of the cutter blades.
A seal leak indicator light is required as well as a thermal cut-out
connection for 3 phase systems. A padlock hasp will be provided. High water
conditions will be indicated by a visible light with polycarbonate cover.
Numbered terminal strips are required. A wiring schematic and trouble
shooting guide will be included with each panel. The panel will be UL
listed and be labeled as such.
Zoeller Simplex Control Panel Features and Benefits
- 115-200-230 Volts
- NEMA 4X Watertight Enclosure With Lockable Latch
- Top Mounted Alarm Light
- Alarm Horn Provides Audio Warning of Alarm Condition (83 to 85 decibel rating)
- Pump Run Indicator Light
- Horn Silence and Alarm Test Toggle Switches
- HOA Switch
- 2 Year Warranty
- Dry Auxiliary Contact (not available in plug-in panels)
Three Phase Simplex Control Panel Features:
- 200, 230, 460, 575 Volts
- Hand-Off-Toggle Switch
- Green Pump Run Light
- Alarm Test and Silence Switches
- Red Alarm Beacon and Audible Alarm for a High Water Condition (83 to 85 decibel rating)
- Motor Protection Switch with Overload Protection
- Magnetic Starter
- Numbered Terminal Strip for Connecting Pumps and Variable Level Float Switches
- Dry Auxiliary Contacts for Remote Alarm Devices
- Three Float Operation (FLOAT SWITCHES NOT INCLUDED)
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov