THE STA-RITE SC9100 SERIES HAS BEEN DISCONTINUED BY THE MANUFACTURER.
PLEASE CALL FOR EQUIVALENT.
Sta-Rite SC9 Series Description
The SC9 Series pump is a rugged, cast iron, submersible pump with a
non-clog, two-vane semi-open impeller and solids handling capability to 2"
Sta-Rite SC9 Series Specifications
- BODY CONSTRUCTION: Cast iron
- HORSEPOWER: 1 HP, 1-1/2 HP or 2 HP
- MOTOR: 1725 RPM, Oil-filled, Permanent split capacitor, built-in
thermal overload protection with auto reset
- IMPELLER: Cast iron
- MAXIMUM HEAD: 29' to 53' depending on model (see pumping curves below)
- MAXIMUM CAPACITY: 200-236 GPM depending on model (see pumping curves
below)
- SWITCH TYPE: Teathered float switch not included
- DISCHARGE SIZE: 2" FNPT (SC9), 3" FNPT (SCC9)
- MAXIMUM SOLIDS HANDLING SIZE: 2" spherical
- AMP DRAW: up to 12 full load amps
- POWER CORD: 20'
- VOLTAGE: 230 VOLT, 1PH, 60 Hz, 230 and 575 VOLT, 3PH, 60 HZ
Sta-Rite SC9 Series Pump Curve
Sta-Rite SC9 Series Product Resources
Download Sta-Rite SC9 Specification
Download Sta-Rite SC Manual
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov