THE STA-RITE EC3 SERIES HAS BEEN DISCONTINUED BY THE MANUFACTURER. PLEASE
CLICK ON THE LINK BELOW FOR THE RECOMMENDED REPLACEMENT
(similar pump but under a different brand)
Sta-Rite EC Series Description
The Sta-Rite EC3 Series pump is a small, rugged, submersible cast iron pump
with a non-clog vortex impeller and solids handling capability to 3/4".
Sta-Rite EC Series Specifications
- BODY CONSTRUCTION: Cast Iron
- HORSEPOWER: 1/3 HP
- MAXIMUM HEAD: Up to 21'
- FLOW AT 10' LIFT: 51 GPM
- SWITCH TYPE: No float included with Manual units
- MOTOR: 1/3 HP, Shaded pole with thermal overload protection
- SHAFT SEAL: Type 6A or equal, Bunea-N elastomers, carbon andceramic
sealing faces, stainless steel metal parts
- BEARINGS: Upper and lower ball bearings, oil lubricated
- IMPELLER: Fiberglass reinforced Noryl® with threaded brass insert
- DISCHARGE SIZE: 1-1/2" FNPT
- MAXIMUM SOLIDS HANDLING SIZE: 3/4"
- AMP DRAW: 13 full load amps
- POWER CORD: 20'
- VOLTAGE: 115 VOLT, 1PH, 60 Hz
- MAXIMUM LIQUID TEMPERATURE: 130 degrees F (55 degrees C)
Sta-Rite EC Series Pump Curve
Sta-Rite EC Series Product Resources
Download Sta-Rite EC Series Specification
Download Sta-Rite EC Series Manual
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov