SJE-Rhombus Model 114 Simplex Single Phase Pump Control w/ Intrinsically Safe Circuits 120/208/240VAC

The Model 114 Build-A-Panel™ control panel provides greater flexibility by ordering through options, allowing you to customize a standard panel to your specific needs.

The Model 114 control panel is designed to control one 120/208/240V single phase pump in applications requiring intrinsically safe float circuits or other circuit extensions.

Two control switches activate a magnetic motor contactor to turn the pump on and off. If an alarm condition occurs, an alarm switch activates the audio/visual alarm system.

Common applications include pump chambers, lift stations or other installations classified as hazardous locations requiring intrinsically safe circuits.

SJE-Rhombus Model 114 - Single Phase Simplex Pump Control Panel w/Intrinsically Safe Circuits Features

Panel Features:

• NEMA 4X (indoor/outdoor) enclosure
• Red alarm beacon provides 360^o visual check of alarm condition
• Alarm horn provides audio warning of alarm condition
• Exterior alarm test/normal/silence switch allow horn and light to be tested and horn to be silenced in an alarm condition; alarm automatically resets once alarm condition is cleared
• Horn silence relay
• Intrinsically safe module limits the amount of energy to switches preventing ignition of flammable gases
• Intrinsically safe partition isolates the intrinsically safe wiring
• IEC motor contactor controls pump by switching electrical lines
• Hand/Off/Auto (HOA) switch for manual pump control
• Green pump run indicator light
• Alarm and control fuses/indicators
• Input power terminal block
• Ground lugs
• Circuit breaker (optional) provides pump disconnect and branch circuit protection
• Overload relay (optional) provides thermal overload protection for pump
• UL/cUL Listed
• Three-Year Limited Warranty

SJE-Rhombus Model 114 - Single Phase Simplex Pump Control Panel w/Intrinsically Safe Circuits Components

1. Enclosure measures 16 x 14 x 6 inches. Choice of NEMA1 or NEMA4X.
2. Intrinsically Safe Module limits the amount of energy to switches preventing ignition of flammable gases.
3. Intrinsically Safe Partition isolates the intrinsically safe wiring.
4. IEC Motor Contactor controls pump by switching electrical lines.
5. HOA Switch for manual pump control (mounted on circuit board).
6. Green Pump Run Indicator Light (mounted on circuit board).
7. Alarm Fuse (mounted on circuit board).
8. Control Fuse (mounted on circuit board).
9. Control Power Indicator Light (mounted on circuit board).
10. Alarm Power Indicator Light (mounted on circuit board).
11. Input Power Terminal Block
12. Ground Lugs
13. Circuit Breaker (optional) provides pump disconnect and brand circuit protection.
14. Overload Relay (optional) provides thermal overload protection for pump.
15. Red Alarm Beacon provides 360º visual check of alarm condition.
16. Alarm Horn provides audio warning of alarm condition (83-85 decibel rating).
17. Exterior Alarm Test/Normal/Silence Switch allows horn and light to be tested and horn to be silenced in an alarm condition. Alarm automatically resets once alarm condition is cleared.
18. Horn Silence Relay (mounted on circuit board).

NOTE: Schematic/Wiring Diagram and Pump Specification Label are located inside the panel

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

SJE-Rhombus Model 114 - Single Phase Simplex Pump Control Panel w/Intrinsically Safe Circuits

SJE-Rhombus Model 114 - Single Phase Simplex Motor Contactor Control Panel Catalog Page

SJE-Rhombus Model 114 - Single Phase Simplex Motor Contactor Control Panel Installation Instructions

Warranty Information