Model 113 control panels provide a reliable means of controlling one
120,208, or 240 VAC single phase pump requiring external starting
components in water and sewage installations. Two control switches activate
an IEC motor contactor to turn the pump on and off. If an alarm condition
occurs, an additional alarm switch activates the audio/visual alarm system.
Common applications include pump chambers and lift stations.
SJE-Rhombus Model 113 - Single Phase Simplex Pump Control Panel Features
PANEL FEATURES:
- NEMA 4X (indoor/outdoor) Enclosure
- Red Alarm Beacon Provides 360º Visual Check of Alarm Condition
- Exterior Alarm Test/Normal/Silence Switch Allows Horn and Light to be
Tested and Horn to be Silenced in an Alarm Condition; Alarm Automatically
Resets Once Alarm Condition is Cleared
- Horn Silence Relay
- IEC Motor Contactor Controls Pump by Switching Electrical Lines
- Hand/Off/Auto (HOA) Switch for Manual Pump Control
- Green Pump Run Indicator Light
- Alarm and Control Fuses/Indicators
- Float Switch Terminal Block
- Pump Input Power and Pump Connection Terminal Block
- Ground Lugs
- Circuit Breaker (optional) Provides Pump Disconnect and Branch Circuit
Protection
- Capacitor Start Module (ordered seperately)
- Standard Package Provides Three 20' SJE SignalMaster Control Switches
- Complete with Step-by-Step Installation Instructions
- Alarm Horn Provides Audio Warning of Alarm Condition
- UL/cUL Listed
- Five-Year Limited Warranty
*Start/Run Capacitor Kit Must be Ordered Seperately. Model 113 Control Panels Cannot be Returned.
SJE-Rhombus Model 113 - Single Phase Simplex Pump Control Panel Components
- Enclosure Measures 14 x 12 x 6 inches, NEMA 4X (ultraviolet stabilized thermoplastic with removable mounting feet for outdoor or indoor use).
* Options Selected may Increase Enclosure Size and Change Component Layout.
- IEC Motor Contactor Controls Pump by Switching Electrical Lines
- HOA Switch for Manual Pump Control (mounted on circuit board)
- Green Pump Run Indicator Light (mounted on circuit board)
- Float Switch Terminal Block (mounted on circuit board)
- Alarm and Control Fuses (mounted of circuit board)
- Alarm and Control Power Indicators (mounted on circuit board)
- Pump Input Power and Pump Connection Terminal Block
- Ground Lugs
- Circuit Breaker (optional) Provides Pump Disconnect and Branch Circuit
Protection
- Capacitor Start Module - Start/Run Capacitor Kit must be Ordered
Separately.
STANDARD ALARM PACKAGE
- Red Alarm Beacon Provides 360° Visual Check of Alarm Condition.
- Alarm Horn Provides Audio Warning of Alarm Condition (83 to 85 decibel rating).
- Exterior Alarm Test/Normal/Silence Switch Allows Horn and Light to be Tested and Horn to be Silenced in an Alarm Condition. Alarm Automatically Resets Once Alarm Condition is Cleared.
- Horn Silence Relay (mounted on circuit board).
NOTE: Other Options Available
Model 113 Control Panels Cannot be Returned
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov