Prev Next

Power-Flo PF4SCE4236 Cutter Pump 4.2 HP 230V 3PH 30' Cord Manual

Price: Discontinued
+ -
Discontinued or no longer available.
SKU: PFPF4SCE4236


Shipping Weight:
460.0 LBS
Shipping Dimensions
Length: 19 In
Width: 17 In
Height: 27 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Discontinued

Power-Flo PF4SCE Series Submersible Cutter Pump Description

Severe duty submersible cutter pump designed for un-screened stringy, fibrous raw sewage applications.

Power-Flo PF4SCE Series Submersible Cutter Pump Application

Submersible Cutter Sewage Pump To Shear Large Solids In Waste Water Down To A Fine Slurry That Can Be Directed To A Central Sewer System.

Power-Flo PF4SCE Series Submersible Cutter Pump Features

  • DISCHARGE: 4” 125 lb., ANSI Flange, Horizontal
  • LIQUID TEMPERATURE: 104°F Continuous
  • MOTOR HOUSING, VOLUTE & SEAL PLATE: Cast Iron, Class 30
  • IMPELLER/CUTTER CONE: 2 Port, Enclosed, Cast Iron, Spiral Cutter Integral with Impeller, Hardened Steel 52/53 Rockwell “C”
  • CUTTER BLADE: Hardened Steel 45/47 Rockwell "C"
  • SHAFT: 420 Stainless Steel
  • HARDWARE: 300 series Stainless Steel
  • SQUARE RINGS: Buna-N
  • SEAL: Tandem mechanical, Oil Filled Reservoir, with Upper - Carbon/Stainless/Buna-N, & Lower - Tungsten Carbide/Tungsten Carbide/Buna-N
  • UPPER BEARING: Single Row, Ball, Grease Lubricated
  • LOWER BEARING: Double Row, Ball, Grease Lubricated
  • POWER CORD: 30 Ft., Pressure Grommet for Sealing
  • SENSOR CORD: 30 Ft. 4G1.5mm², 0.457” O.D., Cord
  • MOTOR: NEMA B, Air Filled, Class F Insulation, Includes Overload Protection, Dual voltage 230/460, 3 Phase
  • SEAL LEAK SENSOR: Normally Open (N/O), Requires Relay in Control Panel.
  • TEMPERATURE SENSOR: Normally Closed (N/C), Requires Relay in Control Panel
  • WARRANTY: 1 Year

Power-Flo PF4SCE4236 Specifications

  • VOLTAGE: 3ø, 230V, 60Hz
  • HORSEPOWER: 4.2 HP
  • AMP DRAW (full load): 12.8
  • MOTOR TYPE: NEMA B, Air Filled, Class F Insulation
  • RPM: 1150
  • MAXIMUM HEAD: 36'
  • MAXIMUM CAPACITY: 460 GPM
  • DISCHARGE PIPE SIZE: 4.0" 125 lb., ANSI Flange, Horizontal
  • IMPELLER TYPE: 2-Port, Enclosed, Cast Iron, Spiral Cutter
  • IMPELLER DIAMETER: 9.25"
  • CORD LENGTH: 30', Pressure Grommet for Sealing
  • BODY CONSTRUCTION: Cast Iron, Class 30
  • MAXIMUM LIQUID TEMPERATURE: 104°F Continuous

Power-Flo PF4SCE Series Submersible Cutter Pump Performance Curve

pf4sce-4236-4246-curve.jpg


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

We've been helping customers since 1953

Trust Guard Security Scanned