Prev Next

Power-Flo PF6NC30044 Non-Clog Sewage Pump 30 HP 460V 3PH 25' Cord

Price: Discontinued
+ -
Discontinued or no longer available.
SKU: PFPF6NC30044


Shipping Weight:
985.0 LBS
Shipping Dimensions
Length: 30 In
Width: 24 In
Height: 52 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Discontinued

Power-Flo PF6NC Series Sewage Pump Description.

Submersible Solids Handling Sewage Pumps are designed for typical raw sewage applications.

Power-Flo PF6NC Series Sewage Pump Typical Application

Submersible Sewage Pump Designed for STEP Systems, Mound Systems, Liquid Waste Transfer and Higher Head De-Watering Applications.

Power-Flo PF6NC Series Sewage Pump Features

  • DISCHARGE: 6" 125 lb., ANSI Flange, Horizontal
  • LIQUID TEMPERATURE: 104°F
  • MOTOR HOUSING, VOLUTE & SEAL PLATE: Cast Iron, Class 30
  • IMPELLER: Single Vane Enclosed Type with Pump Out Vanes on Back Side, Dynamically Balanced, ISO G6.3, Cast Iron, Class 30
  • SHAFT & HARDWARE: Stainless Steel
  • SQUARE RINGS: Buna-N
  • SEAL: Double Mechanical, 1.875", T21 Oil Filled Pressure Equalized Reservoir, Carbon/Ceramic/Buna-N Inner Seal, Silicone Carbide/Buna-N Outer Seal
  • UPPER BEARING: Single Row, Ball, Oil Lubricated
  • LOWER BEARING: Double Row, Ball, Oil Lubricated
  • POWER CORD: 25 Ft., G Type Cord. Epoxy Sealed Housing with Secondary Pressure Grommet for Sealing and Strain Relief.
  • SENSOR CORD: 25 Ft., 18/5, 0.476” O.D., SOW Cord
  • MOTOR: Class F Insulation, Oil Filled
  • THREE PHASE: 230/460 Volt. Dual Voltage. Requires Overload Protection to be Included in Control Panel.
  • SEAL LEAK SENSOR: Normally Open (N/O), 2 Probe Design. Requires Relay in Control Panel.
  • TEMPERATURE SENSOR: Normally Closed (N/C), Requires Relay in Control Panel.
  • WARRANTY: 1 Year.

Power-Flo PF6NC30044 Specifications

  • VOLTAGE: 3ø, 230V, 60Hz
  • HORSEPOWER: 30 HP
  • AMP DRAW (full load): 37.9
  • MOTOR TYPE: Class F Insulation, Oil Filled
  • RPM: 1750
  • MAXIMUM HEAD: 128'
  • MAXIMUM CAPACITY: 1560 GPM
  • SWITCH TYPE: Manual
  • DISCHARGE PIPE SIZE: 6” 125 lb., ANSI Flange, Horizontal
  • MAXIMUM SOLIDS HANDLING SIZE: 3.0"
  • IMPELLER TYPE: Cast Iron, Class 30, Single Vane Enclosed Type with Pump Out Vanes on Back Side, Dynamically Balanced
  • IMPELLER DIAMETER: 11.00"
  • CORD LENGTH: 25', Type: G
  • CORD SIZE: 2/3-3G Cord
  • BODY CONSTRUCTION: Cast Iron, Class 30
  • MAXIMUM LIQUID TEMPERATURE: 104°F Continuous

Power-Flo PF6NC Series Sewage Pump Performance Curve

pf6nc-1750rpm-18-24-30-36-60hp-curve.jpg


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

We've been helping customers since 1953

Trust Guard Security Scanned