Orenco automatic distributing valve assemblies are mechanically operated
and sequentially redirect the pump’s flow to multiple zones in a
distribution field or treatment system. Valve actuation is accomplished by
a combination of pressure and flow. Automatic distributing valve assemblies
allow the use of smaller horsepower pumps on large sand filters and
drainfields. For example, a large community drainfield requiring 300 gpm
can use a six-line valve assembly to reduce the pump flow rate requirement
to only 50 gpm.
The use of high-head effluent pumps with Biotube pump vaults are required
to provide pressure and meet flow requirements, and to prevent debris from
fouling valve operation. An inlet ball valve, a section of clear pipe (for
monitoring), and a union for each outlet are provided for a complete
assembly. Ideal valve location is at high point in system. Refer to Orenco
Automatic Distributing Valve Assemblies (NTP-VA-1) before installation.
Orenco Automatic Distributing Valve Typical Application
- Large Drainfield Dosing when Smaller Pumps are Desired
- Even Distribution to Zoned Disposal Areas
- Sand Filter Dosing
- Multiple Orenco AdvanTex Treatment Pod Dosing
Orenco Automatic Distributing Valve Technical Details
- Mechanically Operated Requiring No Electrical Control or Wiring
- Sequences Pump Between 2 and 6 Zones Depending on Model
- Reduces System Pump and Pipe Size Requirements
- Requires Screened High Head Effluent Pumps for Operation
- Ball Valve and Clear Pipe Included in Assembly to Provide Ease of Operation
- See Orenco Document NTP-VA-1 for Additional Application Information
Orenco Automatic Distributing Valve Head Loss Curves
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Orenco Automatic Distributing Valve Product Resources