Prev Next

Myers MSP50AB1 Submersible Sewage Pump 0.5 HP 115V 1PH Bronze Automatic 20' Cord

Price: Discontinued
+ -
Discontinued or no longer available.
SKU: MYR28217D100


Shipping Weight:
77.0 LBS
Shipping Dimensions
Length: 13 In
Width: 12 In
Height: 17 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

myerslogopumps1.png

Discontinued!

Myers MSP50 Submersible Sewage Pump Description

The Myers MSP50AB1 All Bronze Submersible Sewage Pump is specifically designed to meet the demands of handling wastewater and sewage in marine, residential and commercial applications. The 2" NPT discharge pump (3" discharge optional) is available with a powerful 1/2 horsepower motor. Available in automatic configuration and can handle capacities up to 150 gallons per minute and heads up to 29 feet.

Myers MSP50 Submersible Sewage Pump Typical Application

  • Marine Sump and Sewage
  • Commercial Sewage
  • Residential Sewage
  • High-Capacity Sump
  • Septic Tank Effluent

Myers MSP50 Submersible Sewage Pump Features

  • Water-Resistant Power Cord with Molded Plug is Available in 10 or 20 Foot Lengths and is Easily Field Serviceable.
  • Oil-Filled Motor Provides Superior Cooling and Permanent Lubrication of Bearings MInimizing Maintenance and Extending Service Life.
  • Powerful 1/2 HP Motor Provides Cool and Quiet Operation. Motor Windings Contain Automatic Thermal Overload Protection.
  • The High-Capacity, Non-Clog, Cast Iron Impeller, Which is Threaded to a Nickel Plated Steel Shaft, Efficiently Handles up to 1-1/2" Spherical Solids. Pump-Out Vanes on Back of Impeller Prevent Stringy Materials from Binding Impeller or Shaft.
  • Upper Radial and Lower Thrust Bearings are Heavy-Duty, Single-Row Ball Bearings that are Permanently Lubricated for Service-Free Life.
  • Heavy-Duty, Cast Iron Construction Provides Long Life and Assists in Heat Dissipation for Cooler Motor Operation.
  • Precision, Mechanical Shaft Seal is Extensively-Lapped, Carbon Ceramic-Faced for a Long Leakproof Life.
  • Bottom Inlet has no Screen to Become Clogged, Providing Optimum Pump Performance and Minimal Maintenance.
  • Discharge is a Standard 2" NPT (3" is optional)
  • Includes "Piggyback" Diaphragm Switch

Myers MSP50AB1 Submersible Sewage Pump Technical Details

  • VOLTAGE: 1ø, 115V, 60Hz
  • HORSEPOWER: 0.5 HP
  • AMP DRAW (full load): 12.0
  • MOTOR TYPE: Split-Phase
  • RPM: 1750
  • MAXIMUM HEAD: up to 28'
  • MAXIMUM CAPACITY: up to 140 GPM
  • SWITCH TYPE: Diaphragm Switch w/ Piggyback Plug
  • DISCHARGE PIPE SIZE: 2.0" NPT
  • MAXIMUM SOLIDS HANDLING SIZE: 1-1/2"
  • IMPELLER TYPE: Bronze, Non-Clogging
  • CORD LENGTH: 20'
  • CORD SIZE: 16/3; Type:STWA
  • BODY CONSTRUCTION: Bronze
  • MAXIMUM LIQUID TEMPERATURE: 104°F (40C)

Myers MSP50 Submersible Sewage Pump Performance Curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

pentair-hydromatic-level-4.png

HYDROMATIC warrants to the original consumer purchaser (“Purchaser” or “You”) of HYDROMATIC Sump Pumps, Effluent Pumps, Sewage Pumps (other than 2-1/2"), and Package Systems, that they will be free from defects in material and workmanship for the Warranty Period of 36 months from date of manufacture.

Our warranty will not apply to any product that, in our sole judgement, has been subject to negligence, misapplication, improper installation, or improper maintenance. Without limiting the foregoing, operating a three phase motor with single phase power through a phase converter will void the warranty. Note also that three phase motors must be protected by three-leg, ambient compensated, extra-quick trip overload relays of the recommended size or the warranty is void.

Your only remedy, and HYDROMATIC’s only duty, is that HYDROMATIC repair or replace defective products (at HYDROMATIC’s choice). You must pay all labor and shipping charges associated with this warranty and must request warranty service through the installing dealer as soon as a problem is discovered. No request for service will be accepted if received after the Warranty Period has expired. This warranty is not transferable.

EXCEPTIONS:

Exceptions are warranted for a period of 12 months from date of purchase or 18 months from date of manufacture, whichever comes first.

Hydromatic Special Application Pumps:

  • HCU15/HCU15S/HCU20S
  • HUP
  • P33A1
  • HY106
  • HPUSP125

Battery Back-Up Sump Pumps:

  • A+ Battery Back-up
  • FG-A1
  • FG-100A
  • FG-200A

Filtered Effluent Pumps:

  • HE Series

Grinder Pumps:

  • HPGR Series

2-1/2" Sewage Pumps:

  • S3S Series
  • S4S Series
  • SB3S Series
  • SB4S Series
All accessories and repair parts

HYDROMATIC SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE FOREGOING WARRANTIES SHALL NOT EXTEND BEYOND THE DURATION EXPRESSLY PROVIDED HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on the duration of an implied warranty, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal rights and You may also have other rights which vary from state to state.

This warranty supersedes and replaces all previous warranty publications.

HYDROMATIC

740 East 9th Street, Ashland, OH 44805

Phone: 888-957-8677 • Fax: 888-840-7867 • Web Site: http://www.hydromatic.com

We've been helping customers since 1953

Trust Guard Security Scanned