Prev Next

Hydromatic S4BXP2000DC Premium Efficiency Solids Handling Pump 20 HP 208V 3PH Manual 35' Cord

Price: $22,832.00
Quantity:
+ -
Usually ships within 5 weeks
SKU: HTC528080007

Hydromatic Commercial/Municipal/Industrial Supplier for Idaho Only.

Shipping Weight:
1000.0 LBS
Shipping Dimensions
Length: 28 In
Width: 23 In
Height: 58 In

Hydromatic Pump Logo

Hydromatic S4BXP Premium Efficient Solids Handling Pump Description

Hydromatic S4BXP Premium Efficient Solids Handling Pump is Engineered for lower lifecycle costs, increased serviceability, and increased pump life....the Hydromatic HPE Series offers the lowest cost of ownership using premium-Efficiency oil-filled motor!

Hydromatic S4BXP Typical Application

  • Hazardous location Class I, Division 1, Groups C & D

Hydromatic S4BXP Superior Features

  • Hydromatic HPE pump equipped with a premium efficient motor allows for less energy consumption, lower operating costs and longer pump life.
  • Terminal Block - provides for a positive electrical connection eliminating the need for wire nuts and crimp connectors. The slip fit motor stators allow for easy rebuilds when the time comes. HPE pumps can be equipped with bearing temperature RTDs allowing for optimal preventative maintenance.
  • Oil filled motors have several operational advantages including significantly lower operating temperatures, superior moisture protection and maintenance free self-lubricating bearings.
  • Seal Leak Detection - True early-warning system, housed in seal chamber to alert of liquid intrusion into outboard seal which allows time to schedule a service which eliminates the need for a costly emergency service call.
  • Double-Row Bearings for 50,000 hour life over entire curve.
  • The HPE series of pump is the only submersible pump available with shaft grounding rings to eliminate harmful shaft currents. They are continuous duty rated NEMA MG1 Part 1 compliant.
  • The HPE design allows for maximum seal type choices utilizing standard type 2/2100 silicone carbide seals for low cost as will as the industry's first Switchable Seal Design for use with easy-to-service cartridge seals.
  • Oil-Impregnated bronze sleeve bearing used to create flame path
  • Optional quick release cord design

Hydromatic S4BXP2000DC Technical Details

  • BODY CONSTRUCTION: Class 30 cast iron
  • HORSEPOWER: 20 HP
  • RPM: 1750
  • MAXIMUM HEAD: up to 130'
  • MAXIMUM CAPACITY: up to 825 GPM
  • DISCHARGE PIPE SIZE: 4" Horizontal Discharge
  • MAXIMUM SOLIDS HANDLING SIZE: 3"
  • CORD LENGTH: 35' Standard with Optional Quick Change Connector
  • OPTIONAL CORD LENGTH: 50', 75' and 100' with Optional Quick Change Connector
  • CORD SIZE: 6-4; Type: W OR SOOW, Water Resistant, 600V, 90° C
  • AMP DRAW (full load): 60.2
  • VOLTAGE: 3ø, 208V
  • MAXIMUM LIQUID TEMPERATURE: 140°F
  • MOTOR: Enclosed, oil cooled induction, VFD suitable
  • IMPELLER CONSTRUCTION: Balanced, Enclosed, 2 Vane, Ductile Iron, ASTM A536, Class 65
  • IMPELLER SIZE: 9.0"
  • Section 300

Hydromatic S4BXP Pump Curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

pentair-hydromatic-level-4.png

HYDROMATIC warrants to the original consumer purchaser (“Purchaser” or “You”) of HYDROMATIC Sump Pumps, Effluent Pumps, Sewage Pumps (other than 2-1/2"), and Package Systems, that they will be free from defects in material and workmanship for the Warranty Period of 36 months from date of manufacture.

Our warranty will not apply to any product that, in our sole judgement, has been subject to negligence, misapplication, improper installation, or improper maintenance. Without limiting the foregoing, operating a three phase motor with single phase power through a phase converter will void the warranty. Note also that three phase motors must be protected by three-leg, ambient compensated, extra-quick trip overload relays of the recommended size or the warranty is void.

Your only remedy, and HYDROMATIC’s only duty, is that HYDROMATIC repair or replace defective products (at HYDROMATIC’s choice). You must pay all labor and shipping charges associated with this warranty and must request warranty service through the installing dealer as soon as a problem is discovered. No request for service will be accepted if received after the Warranty Period has expired. This warranty is not transferable.

EXCEPTIONS:

Exceptions are warranted for a period of 12 months from date of purchase or 18 months from date of manufacture, whichever comes first.

Hydromatic Special Application Pumps:

  • HCU15/HCU15S/HCU20S
  • HUP
  • P33A1
  • HY106
  • HPUSP125

Battery Back-Up Sump Pumps:

  • A+ Battery Back-up
  • FG-A1
  • FG-100A
  • FG-200A

Filtered Effluent Pumps:

  • HE Series

Grinder Pumps:

  • HPGR Series

2-1/2" Sewage Pumps:

  • S3S Series
  • S4S Series
  • SB3S Series
  • SB4S Series
All accessories and repair parts

HYDROMATIC SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE FOREGOING WARRANTIES SHALL NOT EXTEND BEYOND THE DURATION EXPRESSLY PROVIDED HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on the duration of an implied warranty, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal rights and You may also have other rights which vary from state to state.

This warranty supersedes and replaces all previous warranty publications.

HYDROMATIC

740 East 9th Street, Ashland, OH 44805

Phone: 888-957-8677 • Fax: 888-840-7867 • Web Site: http://www.hydromatic.com

We've been helping customers since 1953

Trust Guard Security Scanned