Prev Next

Hydromatic S3SD100M5-6 Submersible Sewage Pump 1 HP 575V 3PH Manual 35' Cord

Price: $5,216.00
Quantity:
+ -
Usually ships within 5 weeks
SKU: HTC518463047

Hydromatic Commercial/Municipal/Industrial Supplier for Idaho Only.

Shipping Weight:
188.0 LBS
Shipping Dimensions
Length: 24 In
Width: 24 In
Height: 29 In

Hydromatic Pump Logo

Hydromatic S3SD100M5-6 Sumbersible Sewage Pump Description

The Hydromatic S3SD Sumbersible Sewage Pumps are designed to transfer raw sewage with solids as large as 2-1/2".

Hydromatic S3SD Typical Application

  • Municipal sewage lift stations
  • Industrial sewage transfer
  • Dewatering of storm water

Hydromatic S3SD Superior Features

  • Oil-filled motor for cooler operation, longer life, and less maintenance. The dielectric oil effectively dissipates heat and lubricates upper and lower ball bearings.
  • Upper and lower ball bearings.
  • Dual mechanical seal.
  • The start and run capacitors are located in the control panel for single phase motors.
  • Standard construction is cast iron.
  • 400 series stainless steel shafts.
  • Standard 35' power cord has three conductor PVC jacket.
  • Field serviceable; pumps have 300 series stainless steel fasteners for easy tear down.
  • Semi-open, two-vane sewage type impellers have pump-out vanes on back shrouds to prevent stringy materials from building up around shaft and seal.
  • Manufactured with carbon and ceramic faced mechanical shaft seal for long leak proof life.
  • All units given complete hydraulic test run before shipping.

Hydromatic S3SD100M5-6 Technical Details

  • BODY CONSTRUCTION: Class 30 Cast Iron; ASTM A-48
  • HORSEPOWER: 1.0 HP
  • RPM: 1150
  • MAXIMUM HEAD: up to 44 ft. (13.4 m)
  • MAXIMUM CAPACITY: up to 385 GPM (24.3 LPS)
  • SWITCH TYPE: Control Panel Required
  • MINIMUM SUMP DIAMETER: Simplex = 30" (762mm)
  • DISCHARGE PIPE SIZE: 3" (76.2 mm) NPT
  • MAXIMUM SOLIDS HANDLING SIZE: 2.5" (63.5 mm)
  • CORD LENGTH: 35' Standard
  • OPTIONAL CORD LENGTH: 50'
  • CORD SIZE: 14-4; Type: SOOW, W
  • AMP DRAW (full load): 1.5
  • VOLTAGE: 3ø, 575V, 60Hz
  • MAXIMUM WATER TEMPERATURE: 140°F (60°C)
  • MOTOR: Enclosed, Oil Cooled Induction
  • IMPELLER CONSTRUCTION: Ductile Iron; ASTM 536

Hydromatic S3SD Pump Curve

s3sd-sb3sd-1150-2-curve.jpg


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

STANDARD LIMITED WARRANTY Pentair Hydromatic® warrants its products against defects in material and workmanship for a period of 12 months from the date of shipment from Pentair Hydromatic or 18 months from the manufacturing date, whichever occurs first – provided that such products are used in compliance with the requirements of the Pentair Hydromatic catalog and technical manuals for use in pumping raw sewage, municipal wastewater or similar, abrasive-free, noncorrosive liquids.

During the warranty period and subject to the conditions set forth, Pentair Hydromatic, at its discretion, will repair or replace to the original user, the parts that prove defective in materials and workmanship. Pentair Hydromatic reserves the right to change or improve its products or any portions thereof without being obligated to provide such a change or improvement for prior sold and/or shipped units.

Start-up reports and electrical schematics may be required to support warranty claims. Submit at the time of start up through the Pentair Hydromatic website: http://forms.pentairliterature.com/startupform/startupform.asp?type=h. Warranty is effective only if Pentair Hydromatic authorized control panels are used. All seal fail and heat sensing devices must be hooked up, functional and monitored or this warranty will be void. Pentair Hydromatic will cover only the lower seal and labor thereof for all dual seal pumps. Under no circumstance will Pentair Hydromatic be responsible for the cost of field labor, travel expenses, rented equipment, removal/reinstallation costs or freight expenses to and from the factory or an authorized Pentair Hydromatic service facility.

This limited warranty will not apply: (a) to defects or malfunctions resulting from failure to properly install, operate or maintain the unit in accordance with the printed instructions provided; (b) to failures resulting from abuse, accident or negligence; (c) to normal maintenance services and parts used in connection with such service; (d) to units that are not installed in accordance with applicable local codes, ordinances and good trade practices; (e) if the unit is moved from its original installation location; (f) if unit is used for purposes other than for what it is designed and manufactured; (g) to any unit that has been repaired or altered by anyone other than Pentair Hydromatic or an authorized Pentair Hydromatic service provider; (h) to any unit that has been repaired using non factory specified/ OEM parts.

Warranty Exclusions: Pentair HYDROMATIC MAKES NO EXPRESS OR IMPLIED WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. Pentair HYDROMATIC SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE.

Liability Limitation: IN NO EVENT SHALL Pentair HYDROMATIC BE LIABLE OR RESPONSIBLE FOR CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES RESULTING FROM OR RELATED IN ANY MANNER TO ANY Pentair HYDROMATIC PRODUCT OR PARTS THEREOF. PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY RESULT FROM IMPROPER INSTALLATION. Pentair HYDROMATIC DISCLAIMS ALL LIABILITY, INCLUDING LIABILITY UNDER THIS WARRANTY, FOR IMPROPER INSTALLATION. Pentair HYDROMATIC RECOMMENDS INSTALLATION BY PROFESSIONALS.

Some states do not permit some or all of the above warranty limitations or the exclusion or limitation of incidental or consequential damages and therefore such limitations may not apply to you. No warranties or representations at any time made by any representatives of Pentair Hydromatic shall vary or expand the provision hereof.

We've been helping customers since 1953

Trust Guard Security Scanned