Hydromatic S12LXP Premium Efficient Solids Handling Pump Description
Hydromatic S12LXP Premium Efficient Solids Handling Pump is Engineered for lower lifecycle costs, increased serviceability, and increased pump life....the Hydromatic HPE Series offers the lowest cost of ownership using premium-Efficiency oil-filled motor!
Hydromatic S12LXP Typical Application
- Hazardous Locations Class I, Division 1, Groups C & D
Hydromatic S12LXP Superior Features
- Hydromatic HPE pump equipped with a premium efficient motor allows for less energy consumption, lower operating costs and longer pump life.
- Terminal Block - provides for a positive electrical connection eliminating the need for wire nuts and crimp connectors. The slip fit motor stators allow for easy rebuilds when the time comes. HPE pumps can be equipped with bearing temperature RTDs allowing for optimal preventative maintenance.
- Oil filled motors have several operational advantages including significantly lower operating temperatures, superior moisture protection and maintenance free self-lubricating bearings.
- Seal Leak Detection - True early-warning system, housed in seal chamber to alert of liquid intrusion into outboard seal which allows time to schedule a service which eliminates the need for a costly emergency service call.
- Double-Row Bearings for 50,000 hour life over entire curve.
- The HPE series of pump is the only submersible pump available with shaft grounding rings to eliminate harmful shaft currents. They are continuous duty rated NEMA MG1 Part 1 compliant.
- The HPE design allows for maximum seal type choices utilizing standard type 2/2100 silicone carbide seals for low cost as will as the industry's first Switchable Seal Design for use with easy-to-service cartridge seals.
- Oil-Impregnated bronze sleeve bearing used to create flame path
- Optional quick release cord design
Hydromatic S12LXP2500GA Technical Details
- BODY CONSTRUCTION: Class 30 Cast Iron
- HORSEPOWER: 25 HP
- RPM: 870
- MAXIMUM HEAD: up to 47'
- MAXIMUM CAPACITY: up to 5000 GPM
- DISCHARGE PIPE SIZE: 12" Horizontal Discharge
- MAXIMUM SOLIDS HANDLING SIZE: 6"
- CORD LENGTH: 35' Standard
- OPTIONAL CORD LENGTH: 50'
- CORD SIZE: 8-4; Type: SOOW/W
- AMP DRAW (full load): 32.9
- VOLTAGE: 3ø, 575V
- MAXIMUM LIQUID TEMPERATURE: 140°F
- MOTOR: Enclosed, Oil Cooled Induction, VFD Suitable
- IMPELLER CONSTRUCTION: Balance, Enclosed, 2 Vane, Ductile Iron, ASTM A536
- IMPELLER SIZE: 13.5"
- Section 300
Hydromatic S12LXP Pump Curve
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
STANDARD LIMITED WARRANTY
Pentair Hydromatic® warrants its products against defects in material and workmanship for a period of 12 months
from the date of shipment from Pentair Hydromatic or 18 months from the manufacturing date, whichever
occurs first – provided that such products are used in compliance with the requirements of the Pentair Hydromatic
catalog and technical manuals for use in pumping raw sewage, municipal wastewater or similar, abrasive-free,
noncorrosive liquids.
During the warranty period and subject to the conditions set forth, Pentair Hydromatic, at its discretion, will repair
or replace to the original user, the parts that prove defective in materials and workmanship. Pentair Hydromatic
reserves the right to change or improve its products or any portions thereof without being obligated to provide such
a change or improvement for prior sold and/or shipped units.
Start-up reports and electrical schematics may be required to support warranty claims. Submit at the time of start up
through the Pentair Hydromatic website: http://forms.pentairliterature.com/startupform/startupform.asp?type=h.
Warranty is effective only if Pentair Hydromatic authorized control panels are used. All seal fail and heat sensing
devices must be hooked up, functional and monitored or this warranty will be void. Pentair Hydromatic will cover
only the lower seal and labor thereof for all dual seal pumps. Under no circumstance will Pentair Hydromatic be
responsible for the cost of field labor, travel expenses, rented equipment, removal/reinstallation costs or freight
expenses to and from the factory or an authorized Pentair Hydromatic service facility.
This limited warranty will not apply: (a) to defects or malfunctions resulting from failure to properly install, operate or
maintain the unit in accordance with the printed instructions provided; (b) to failures resulting from abuse, accident
or negligence; (c) to normal maintenance services and parts used in connection with such service; (d) to units that
are not installed in accordance with applicable local codes, ordinances and good trade practices; (e) if the unit is
moved from its original installation location; (f) if unit is used for purposes other than for what it is designed and
manufactured; (g) to any unit that has been repaired or altered by anyone other than Pentair Hydromatic or an
authorized Pentair Hydromatic service provider; (h) to any unit that has been repaired using non factory specified/
OEM parts.
Warranty Exclusions: Pentair HYDROMATIC MAKES NO EXPRESS OR IMPLIED WARRANTIES THAT EXTEND
BEYOND THE DESCRIPTION ON THE FACE HEREOF. Pentair HYDROMATIC SPECIFICALLY DISCLAIMS THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE.
Liability Limitation: IN NO EVENT SHALL Pentair HYDROMATIC BE LIABLE OR RESPONSIBLE FOR
CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES RESULTING FROM OR RELATED IN ANY MANNER TO
ANY Pentair HYDROMATIC PRODUCT OR PARTS THEREOF. PERSONAL INJURY AND/OR PROPERTY DAMAGE
MAY RESULT FROM IMPROPER INSTALLATION. Pentair HYDROMATIC DISCLAIMS ALL LIABILITY, INCLUDING
LIABILITY UNDER THIS WARRANTY, FOR IMPROPER INSTALLATION. Pentair HYDROMATIC RECOMMENDS
INSTALLATION BY PROFESSIONALS.
Some states do not permit some or all of the above warranty limitations or the exclusion or limitation of incidental or
consequential damages and therefore such limitations may not apply to you. No warranties or representations at any
time made by any representatives of Pentair Hydromatic shall vary or expand the provision hereof.