Prev Next
  • Hydromatic HVRS200M2-2 Grinder Pump Manual 2.0 HP 230V 1PH - HTC528350017
  • Hydromatic HVRS200M2-2 Grinder Pump Manual 2.0 HP 230V 1PH - HTC528350017

Hydromatic HVRS200M2-2 Grinder Pump Manual 2.0 HP 230V 1PH

Price: $2,768.00
Quantity:
+ -
Usually ships within 5 weeks
SKU: HTC528350017

Hydromatic Commercial/Municipal/Industrial Supplier for Idaho Only.

Shipping Weight:
95.0 LBS
Shipping Dimensions
Length: 10 In
Width: 12 In
Height: 23 In

Hydromatic Pump Logo

Hydromatic HVR200 Automatic Grinder Pump Description

The new Hydromatic HVR200 Series grinders feature a patent-pending axial cutter technology that easily slices through solids and trash found in domestic wastewater without roping or clogging. They come with plenty of standard features to make installation a breeze.

The HVR200 is a rugged and economical solution for residential and pressure sewage systems.

Hydromatic HVR200 Features

  • WIDE ANGLE FLOAT SWITCH: Piggy-Back Cord for Easy Maintenance.
  • CABLE ENTRY SYSTEM: Cable Jacket Sealed by Compression Fitting and Individual Wires Sealed by Compression Grommet for Double Seal Protection Against Water Ingress.
  • OIL-FILLED MOTOR:
    • Maximizes Heat Dissipation and Provides Constant Bearing Lubrication for Long Life.
    • High Torque Start/Run Capacitor for Single Phase Motors for Assured Starting Under Heavy Loads.
    • Internal Capacitors Eliminate Need for Control Panel.
  • INTEGRATED HEAT SENSOR: Protects Motor from Burnout Due to Excessive Heat from any Overload Condition. Automatically Resets when Motor has Cooled.
  • SHAFT and FASTNERS: Stainless Steel for Maximum Corrosion Resistance and Long Life.
  • SHAFT SEALS: Oil Lubricated Single Carbon and Ceramic Faced Seal Provides Motor Protection.
  • IMPELLER:
    • Semi-Open Impeller Handles Ground Slurry Without Clogging or Binding.
    • Pump-Out Vanes Help Keep Trash from Seal and Reduces Pressure at Seal Face for Longer Life.
  • AXIAL CUTTER SYSTEM:
    • Easily Slice Through Solids and Trash Commonly Found in Domestic Wastewater without Roping and Clogging.
    • Constructed of 440 SST Hardened to 57-60Rc for Long Life.
    • Easily Replaceable without Dismantling Pump.
  • VOLUTE CASE: Cast Iron, 1-1/4" Vertical, Flanged Discharge.

Hydromatic HVRS200M2-2 Specifications

  • BODY CONSTRUCTION: Class 30 Cast Iron
  • HORSEPOWER: 2.0 HP
  • RPM: 3450
  • MAXIMUM HEAD: up to 139'
  • MAXIMUM CAPACITY: up to 35 GPM
  • DISCHARGE PIPE SIZE: 1.25" (31.75 mm) Discharge
  • CORD LENGTH: 20' Standard
  • CORD SIZE: 14-3; Type: SJOOW
  • AMP DRAW (full load): 15.0
  • VOLTAGE: 1ø, 230V
  • MAXIMUM LIQUID TEMPERATURE: 140°F
  • MOTOR: Enclosed, Oil Cooled Induction
  • IMPELLER CONSTRUCTION: Semi-Open 8 Vane, Stainless Steel

Hydromatic HVR200 Pump Curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

STANDARD LIMITED WARRANTY Pentair Hydromatic® warrants its products against defects in material and workmanship for a period of 12 months from the date of shipment from Pentair Hydromatic or 18 months from the manufacturing date, whichever occurs first – provided that such products are used in compliance with the requirements of the Pentair Hydromatic catalog and technical manuals for use in pumping raw sewage, municipal wastewater or similar, abrasive-free, noncorrosive liquids.

During the warranty period and subject to the conditions set forth, Pentair Hydromatic, at its discretion, will repair or replace to the original user, the parts that prove defective in materials and workmanship. Pentair Hydromatic reserves the right to change or improve its products or any portions thereof without being obligated to provide such a change or improvement for prior sold and/or shipped units.

Start-up reports and electrical schematics may be required to support warranty claims. Submit at the time of start up through the Pentair Hydromatic website: http://forms.pentairliterature.com/startupform/startupform.asp?type=h. Warranty is effective only if Pentair Hydromatic authorized control panels are used. All seal fail and heat sensing devices must be hooked up, functional and monitored or this warranty will be void. Pentair Hydromatic will cover only the lower seal and labor thereof for all dual seal pumps. Under no circumstance will Pentair Hydromatic be responsible for the cost of field labor, travel expenses, rented equipment, removal/reinstallation costs or freight expenses to and from the factory or an authorized Pentair Hydromatic service facility.

This limited warranty will not apply: (a) to defects or malfunctions resulting from failure to properly install, operate or maintain the unit in accordance with the printed instructions provided; (b) to failures resulting from abuse, accident or negligence; (c) to normal maintenance services and parts used in connection with such service; (d) to units that are not installed in accordance with applicable local codes, ordinances and good trade practices; (e) if the unit is moved from its original installation location; (f) if unit is used for purposes other than for what it is designed and manufactured; (g) to any unit that has been repaired or altered by anyone other than Pentair Hydromatic or an authorized Pentair Hydromatic service provider; (h) to any unit that has been repaired using non factory specified/ OEM parts.

Warranty Exclusions: Pentair HYDROMATIC MAKES NO EXPRESS OR IMPLIED WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. Pentair HYDROMATIC SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE.

Liability Limitation: IN NO EVENT SHALL Pentair HYDROMATIC BE LIABLE OR RESPONSIBLE FOR CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES RESULTING FROM OR RELATED IN ANY MANNER TO ANY Pentair HYDROMATIC PRODUCT OR PARTS THEREOF. PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY RESULT FROM IMPROPER INSTALLATION. Pentair HYDROMATIC DISCLAIMS ALL LIABILITY, INCLUDING LIABILITY UNDER THIS WARRANTY, FOR IMPROPER INSTALLATION. Pentair HYDROMATIC RECOMMENDS INSTALLATION BY PROFESSIONALS.

Some states do not permit some or all of the above warranty limitations or the exclusion or limitation of incidental or consequential damages and therefore such limitations may not apply to you. No warranties or representations at any time made by any representatives of Pentair Hydromatic shall vary or expand the provision hereof.

We've been helping customers since 1953

Trust Guard Security Scanned