Prev Next

Geoflow Drip Tubing WFP05B Wasteflow BLANK Line (No Emitters) - Per Foot Price - 100' Minimum Order

Price: Call For Details
Quantity:
+ -
Usually ships within 2 weeks
SKU: GFWWFP05B

Shipping Weight:
0.1 LBS
Shipping Dimensions
Length: 24 In
Width: 1 In
Height: 1 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

geoflow600a.png

The flexible 1/2” polyethylene blank line has no emitters and us normally used to bridge areas where emitters are not needed or wanted in the system design. This Geoflow drip tubing is built to last. It is guaranteed to be trouble-free from root intrusion with built-in nano-ROOTGUARD® protection, and the dripline wall is protected from organic growth with the Geoshield lining. Use 600 series compression adapters or lockslip fittings to connect the dripline to PVC pipe.

BACTERICIDE ProtectionGeoshield® is incorporated into the inner lining and emitters of WASTEFLOW dripline to prevent bacteria from forming and eliminates the need to scour the tubing. It is a tin based formula that defeats the energy system of microbial cells. This means smaller pumps or larger zones can be used with Geoflow drip line than unprotected drip line.

Geoflow Wasteflow PC Drip Tubing Specifications

The dripline shall consist of nominal sized one-half inch linear low density polyethylene tubing, with turbulent flow drip emitters bonded to the inside wall. The drip emitter flow passage shall be 0.032” x 0.045” square. The tubing shall have an outside diameter (O.D.) of approximately .64-inches and an inside diameter (I.D.) of approximately .55-inches. The tubing shall consist of three layers; the inside layer shall be a Geoshield® protection, the middle layer shall be black and the outside layer shall be purple striped for easy identification. The dripline shall have emitters regularly spaced 24” (or 18” or 12”) apart. The pressure compensating emitters shall be molded from virgin polyethylene resin with a silicone rubber diaphragm. The pressure compensating emitters shall have nominal discharge rates of 0.53 gallons per hour. The emitters shall be impregnated with Treflan® to inhibit root intrusion for a minimum period of fifteen years and shall be guaranteed by the manufacturer to inhibit root intrusion for this period. 0.53 gph WASTEFLOW PC pressure compensating dripline shall be Geoflow model number WFPC16-2-24 (or WFPC16-2-18 or WFPC16-2-12)

Geoflow Wasteflow PC Drip Tubing Technical Details

geoflowwasteflowpcpressureloss.jpg

geoflowwasteflowpcpressurelosschart.jpg


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Geoflow Air Release Vent Technical Product Resources

product-resourcesb.png

Download Geoflow Design Manual

We've been helping customers since 1953

Trust Guard Security Scanned