Prev Next

Barmesa 3X3X13 Split Coupled Vertical In-Line Pump 3.0 HP 3PH

Price: $5,660.25
Quantity:
+ -
Usually ships within 2 days
SKU: BMS60400289


Shipping Weight:
502.0 LBS
Shipping Dimensions
Length: 17 In
Width: 18 In
Height: 38 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Barmesa 3X3X13 Split Coupled Vertical In-Line Pump

The BVL Vertical In-Line Pump Series is a versatile and cost-effective pumping solution. The BVL Series does not require field alignment or a foundation. The pump is supported by the pipes, thus avoiding misalignment. Plus the vertical design takes up to three times less space than a horizontal split case pump installation. The BVL pumps are engineered  with a dynamically balanced impeller to ensure silent operation and require minimum maintenance time.

Barmesa 3X3X13 Split Coupled Vertical In-Line Pump Typical Applications

  • Air Conditioning
  • Condensed Water
  • Chilled Water
  • Service Water

Barmesa 3X3X13 Split Coupled Vertical In-Line Pump Features and Benefits

  • Pumps do not Require Field Alignment or a Foundation.
  • Space Saving Can Take up to Three Times Less Space Than the Horizontal Split Case Pump.
  • Coupling Allows all Mechanical Seals Components to be Removed for Servicing without Disturbing other Components. Reinstalling it gets the Pump Back to its Original Specifications.
  • Highly Reliable Due to the Rotating Assembly and the Dynamically Balanced Impeller Assuring a Silent Operation
  • Simplifies Pipes Fixing Considerably. The Pump is Supported by the Pipes Avoiding Misalignment.
  • Installation and Servicing Costs are Highly Reduced.
  • Minimum Time Required for Maintenance
  • Servicing can be Done without Disassembling it.
  • Mechanical Seal is Viton Secondary, Carbon Rotating Face and Silicon Carbide Stationary Seat. Stainless Steel Multi-Spring Outside Balanced Type.

Barmesa 3X3X13 Split Coupled Vertical In-Line Pump Specifications

  • HORSEPOWER: 3.0 HP
  • PHASE: 3 Ph
  • HERTZ: 60 Hz
  • RPM: 1150 RPM
  • DISCHARGE PIPE SIZE: 4.0" Discharge
  • MAX HEAD: 80'
  • MAX FLOW RATE: 210 GPM
  • IMPELLER TYPE: Fully Enclosed, Dynamically Balanced
  • FRAME SIZE: 213TC

Barmesa 3X3X13 Split Coupled Vertical In-Line Pump Performance Curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

BARMESA PUMPS FACTORY WARRANTY


Barmesa Pumps warrants that products of our manufacture will be free of defects in material and workmanship under normal use and service for 18 months from date of manufacture or 12 months from installation date whichever occurs first. This warranty gives you specific legal rights,which vary from state to state.

This warranty is a limited warranty, and no warranty related claims of any nature whatsoever shall be made against Barmesa Pumps, until the ultimate consumer or his/her successor notifies us inwriting of the defect and delivers the product and/or defective part(s) freight prepaid to our factory or nearest authorized service station as instructed by Barmesa Pumps. THERE SHALL BE NO FURTHER LIABILITY. WHETHER BASED ON WARRANTY. NEGLIGENCE OR OTHERWISE. PRODUCT SHALL BE EITHER REPLACED OR REPAIRED AT THE ELECTION OF BARMESA PUMPS. Guarantees relating to performance specifications provided in addition to the foregoing material and workmanship warranties on a product manufactured by Barmesa Pumps, if any, are subject to possible factory testing. Any additional guarantees, in the nature of certified performance specifications or time frame must be inwriting and such writing must be signed byour authorized factory manager at time of order placement and/or at time of quotation. Due to inaccuracies in field testing and should a conflict arises between the results of field testing conducted by or for the user, Barmesa Pumps reserves the right to have the product returned to our factory for additional testing.

This warranty shall not apply when damage is caused by (1) improper installation, (2) improper voltage, (3) lightning, (4) excessive sand or other abrasive material, (5) corrosion build-up due to excessive chemical content or (6) uncontrollable acts of god. Any modification of the original equipment will also void the warranty. We will not be responsible for loss, damage or labor cost due to interruption of service caused by defective pumps, parts or systems. Barmesa Pumps will not accept charges incurred by others without our prior written approval.

This warranty is void if our inspection reveals the product was used in a manner inconsistent with normal industry practice and/or our specific recommendations. The purchaser is responsible for communication of all necessary information regarding the application and use of the product. UNDER NO CIRCUMSTANCES WILL WE BE RESPONSIBLE FOR ANY OTHER DIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO TRAVEL EXPENSES, CONTRACTOR FEES, UNAUTHORIZED REPAIR SHOP EXPENSES, LOST PROFITS, LOST INCOME, LABOR CHARGES, DELAYS IN PRODUCTION, IDLE PRODUCTION, WHICH DAMAGES ARE CAUSED BY ANY DEFECTS IN MATERIAL AND/OR WORKMANSHIP AND/OR DAMAGE OR DELAYS IN SHIPMENT. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTY. No rights extended under this warranty shall be assigned to any other person, whether by operation of law or otherwise, without our prior written approval.

IMPORTANT!

If you have a claim under the provision of the warranty, contact Barmesa Pumps or your authorized Barmesa Pumps Distributor:

warranty@barmesapumps.com

www.barmesapumps .com

We've been helping customers since 1953

Trust Guard Security Scanned